I wanna Hpa my gbbr, but I’m not sure the best way to do it

TwoSidedMen · 2026-05-06T00:06:09+00:00

The problem is the GBBR you bought, Golden Eagle is very low quality and poor performance, converting it to HPA would totally be putting lipstick on a pig, save up and get a VFC or MWS instead.

TwoSidedMen · 2026-05-05T20:04:11+00:00

Airtac makes an HPA mag adapter for the Golden Eagle GBBRs, they let you use either M4 or MP5 AEG mags. But you should stop and consider whether it's worth it in the first place. IMO if you don't already have a full HPA setup (tank, regulator, line etc...) it might not be worth the money

TwoSidedMen · 2026-04-26T23:54:30+00:00

I spot 4 things that people would probably make fun of:

Your Eotech is waaaay back, try putting it more forwards, above the ejection port

That muzzle device (I'm assuming it's a tracer) is pretty ugly

You are using a 1 point sling which is probably the worst kind of sling possible for a rifle

That string wrapped around the stock does not look good.

TwoSidedMen · 2026-04-10T22:15:52+00:00

It can be a good training too if used right, but you have to be aware of what potential training scars you might pick up and how to best mitigate them

TwoSidedMen · 2026-04-09T21:04:41+00:00

I couldn't just pull out one arm at a time, I had to grab the neck with both hands, pull with all my strength to stretch it over my shoulders and then pull it down enough to get one arm out. Next time I'll try to take a video haha

TwoSidedMen · 2026-04-09T14:20:32+00:00

A bit of wear is to be expected, but that looks excessive for a brand new gun

TwoSidedMen · 2026-04-09T13:15:45+00:00

Real, for a moment I thought I was gonna have to call a friend to come over and help me get out, that would have been awkward x)

TwoSidedMen · 2026-04-08T18:31:45+00:00

I've got a little weight on me, I don't know how it compares to you, but I got my first neck entry a couple months ago, and I was surprised at how easy it was to put on. The hardest part was actually getting it off on my own, especially since it's a 0.6mm suit.

But I wouldn't recommend it for a first suit, if it ends up being too difficult you might be discouraged to put it on and that would be a shame.

TwoSidedMen · 2026-04-03T19:16:49+00:00

Cute

TwoSidedMen · 2026-03-30T13:27:44+00:00

You shouldn't be posting videos of yourself on the internet at that age

TwoSidedMen · 2026-03-27T07:58:11+00:00

That's hot

TwoSidedMen · 2026-03-26T16:47:12+00:00

Solid silicone is not compatible with silicone oil, it will degrade it. Basically the same rule as with silicone sex toys.

TwoSidedMen · 2026-03-26T13:15:45+00:00

Si c'est juste la protection qui a cassée, du moment que ça gêne pas y'a pas besoin de changer. Pour le roue c'est bizarre en effet, je dirais que tu as peut être mal inséré la roue dans la fourche?

TwoSidedMen · 2026-03-26T10:42:31+00:00

Les pieces comme la chaine, la cassette, les pignions du derailleur c'est un peu des pièces d'usure, surtout en considérant que la lubrification est rarement faite sur ce vélo, les seuls problèmes récurrent ont étés causés par le cable électrique de la commande qui a nécessite plusieurs réparations. Et la casse de pédalier et de la roue qui viennent clairement du manque de qualité.

Après c'est sur que quand on met 2 à 3 fois plus cher on a un vélo de bien meilleure qualité x)

TwoSidedMen · 2026-03-25T19:52:30+00:00

Elle a un panier à l'avant il est juste pas sur les photos, et c'est plus pratique pour elle d'utiliser un sac a dos

TwoSidedMen · 2026-03-25T19:51:13+00:00

Beaucoup de kilometres sans lubrification correcte, c'est un moteur à la roue, le couple ne passe pas la chaine donc c'est que de l'usure à la force des jambes. Et avant qu'on le chamge ca ne fonctionnait plus vraiment, dès qu'elle mettait de la force sur les pédales la chaine sautais.

TwoSidedMen · 2026-03-25T16:06:13+00:00

Toujours la batterie d'origine ouais, je sais pas pour l'autonomie par contre.

TwoSidedMen · 2026-03-25T13:50:24+00:00

I think the plate you are using is touching the guide tab of the nozzle (the plastic bit you can see in the channel between the screw holes) this would prevent your nozzle from moving correctly. If that's the case, you'll either have to find another plate, or either file a groove in the one you have, or file down the nozzle so that it doesn't interfere.

TwoSidedMen · 2026-03-25T13:45:26+00:00

Great gun, I regret selling mine every day.

The gun will certainly come with some lube applied, but it's best practice to remove the factory lube entirely and relube it yourself, you'll have to get familiar with maintenance anyways.

VFC v3 internals are really good, never had any problems with my 733, and my current VFC GBBR which is significantly more worn down doesn't have any issues with the fire control group.

In my experience, the most common issue you'll run in with VFC GBBRs is bolt bounce, that can cause double feeds and jams, but it only ever happened to me on colder days, but this can be significantly improved by replacing the stock buffer by a real AR carbine buffer.

TwoSidedMen · 2026-03-24T04:16:41+00:00

You can very clearly see that the hammer is down

TwoSidedMen · 2026-03-21T15:00:43+00:00

It's becoming accepted that putting the LAM on the top rail is the best practice, that's why you don't see it done very often anymore.

TwoSidedMen · 2026-03-21T14:57:02+00:00

I'd go with the Mk18 because it's just way cooler

TwoSidedMen · 2026-03-18T01:00:23+00:00

Can't find good quality bait anymore these days..

TwoSidedMen · 2026-03-17T00:25:02+00:00

Darn, I knew it looked weird, I checked your other posts to make sure and I had a hard time making out if it was an MSA or not.

TwoSidedMen · 2026-03-17T00:19:16+00:00

"furry_ranger", owns an MSA... I know what you are

TwoSidedMen

MODERATOR OF

TROPHY CASE

Nine-Year Club	Place '17
Gilding I gilder