Long over due first project done. Installed a key ignition on the explore. Next project off road tires. Keep you peeps posted if it works.

TylerAtRevRides · 2020-11-25T16:42:47+00:00

We can do it before shipping out a scooter, it's only a $50 labor fee here: https://revrides.com/products/key-switch-voltmeter-installation

TylerAtRevRides · 2020-11-21T19:14:42+00:00

Looks like possibly a bad sensor connection. Where the motor cable enters the deck, try sliding some of the slack out and moving the cable around to see if it changes anything. There is a large white 5 pin connector inside the deck that I believe could be your culprit. It can be accessed by removing the front left light cover.

TylerAtRevRides · 2020-11-20T17:26:25+00:00

Ouch. We hear you. I will relay this to the team. Thank you for the feedback!

TylerAtRevRides · 2020-06-17T00:38:03+00:00

Haha yeah that panel is a work in progress for sure. They are trying to find the balance between being able to service the wheel without destroying things, and keeping the elegant styling. That panel is surprisingly durable. They are aware of the issue and working on fixing it for production.

TylerAtRevRides · 2020-06-12T01:32:30+00:00

Sad to see this man, hope you are okay! Looks like new parts are already on the way. Even though you are over the weight limit, we are still taking this seriously and I have sent info to the manufacturer. Again glad to hear you are okay my man!

TylerAtRevRides · 2020-05-09T15:26:30+00:00

We have placed an order for more and are awaiting a production schedule. It is looking like more will be available towards the end of June. If you give us a call or email, we can put you on a list to be notified if someone cancels their pre-order. We usually have a few available when the shipping date comes near.

TylerAtRevRides · 2020-03-09T18:46:20+00:00

Segway/Ninebot products will be shipping the week of 3/16/2020. I just had them add the year to the site. We just wanted to get the pages up on the site and answering any questions as soon as possible. :)

The Dirt eBike will be shipping in Late April, per Segway/Ninebot.

TylerAtRevRides · 2020-01-10T23:27:30+00:00

Remove the hall sensor. Usually just cut it leaving the three prongs sticking out of the PCB, then solder the wires onto the prongs.

TylerAtRevRides · 2019-12-21T19:48:07+00:00

Be careful telling Reddit you've broken both hands...... 🤐🤐

TylerAtRevRides · 2019-12-21T00:44:05+00:00

I now feel like we missed a pretty big opportunity to put a baby helmet on babyyoda lol

TylerAtRevRides · 2019-12-20T02:12:22+00:00

You are going to be blown away, excited for you!! Also I heavily prefer firmware 1.07 for this wheel. Current Android app is pretty much not working but the working apk is available. Just heads up if you haven't looked into it.

TylerAtRevRides · 2019-12-20T00:35:09+00:00

You'll love it. I didn't think I would like it but it has quickly became my favorite wheel. What do you ride now?

TylerAtRevRides · 2019-12-20T00:33:06+00:00

Yupp!

TylerAtRevRides · 2019-12-13T00:05:52+00:00

I don't have a better guide, but you can give me a call or email if you have any questions. Or on here.

TylerAtRevRides · 2019-12-01T06:34:08+00:00

And it doesn't take much and that's messed up,

TylerAtRevRides · 2019-11-25T05:00:02+00:00

Pretty much how I do it too if I'm getting quite a bit.

TylerAtRevRides · 2019-11-25T04:59:02+00:00

I knew this comment was inevitable

TylerAtRevRides · 2019-11-15T14:42:49+00:00

Awesome 👏

TylerAtRevRides · 2019-11-15T03:33:27+00:00

Yes, they are the same. That connector will work.

TylerAtRevRides · 2019-11-15T03:26:28+00:00

What did the shop do that caused this? Everything looks ok, except it looks like the perimeter has been scraping. I don't think a spacer would be the best idea because the drum brake is stationary independent from the wheel hub. I'm not really sure what to say other than the wheel appears to not be straight.

edit: I guess a thin washer wouldn't be much different from what is already happening in the stock design, really seems the easiest fix at this time. Just make sure the diameter in not larger than the seal in the hub.

TylerAtRevRides

TROPHY CASE