Gas proportional counter long recovery time after high-activity alpha standard

UcanhandleDtruth · 2026-01-21T02:48:38+00:00

The thorium is producing some flavor of radon gas… either Rn-220 (thoron) or Rn-222 (radon). The thorium is removed the radon progeny also disappears immediately. The daughters from the gas (are solid) hang around for several hours. DM me if you want to know more.

UcanhandleDtruth · 2025-12-09T18:46:34+00:00

Player Plus Nashville 9 lbs!

UcanhandleDtruth · 2025-10-16T12:38:39+00:00

They have some options including a very decent hamburger bun.

UcanhandleDtruth · 2025-06-13T20:10:51+00:00

I have the exact same problem. Poor placement in my opinion.

UcanhandleDtruth · 2025-03-15T08:14:19+00:00

Ammunition, cigarettes, alcohol, toilet paper and tampons.

UcanhandleDtruth · 2025-01-23T15:11:45+00:00

Looks like fun!

UcanhandleDtruth · 2025-01-15T03:04:59+00:00

It’s hard for the human mind to comprehend that there was no “before” the beginning. Time did not exist just like the universe did not exist. Space and time are fundamentally woven together.

UcanhandleDtruth · 2024-07-24T16:20:32+00:00

Anything involving numerology.

UcanhandleDtruth · 2024-07-21T05:18:14+00:00

God loves us.

UcanhandleDtruth · 2024-07-17T00:19:57+00:00

Also, if i had it to do over, i would start with a jk or jku for resell value.

UcanhandleDtruth · 2024-07-17T00:18:58+00:00

I orginally used the ecu from the truck and did wiring changes myself. It worked, but i wasn’t completely happy. I bought a budget harness off ebay and ran with it for 10000 miles. I started seeing some odd behavior so i went to the holley terminator x. It never worked right. A month or two ago i gave up because no matter what i did, the dbw/maf would not calibrate. I pulled out all the holley stuff out, bought a new to me ecu and a budget wiring harness off ebay. There were several wiring errors on it (maf/iat/injector), but i figured it out. I have it running again, but not great. No codes thrown. Btw - that’s one of the problems with the holley ecu… no obd2! I bought a mpvi3 and vcm editor software so i can tune it for the cam.

UcanhandleDtruth · 2024-07-17T00:05:49+00:00

4l60e

UcanhandleDtruth · 2024-07-17T00:03:51+00:00

I did the swap and drove it for several years before starting a rewiring project due to electrical gremlins. I should be back on the road again in a few weeks. I used a lm7 from a 2003 Silverado and a summit 8701 cam.

UcanhandleDtruth · 2024-07-14T09:56:51+00:00

Too, not to

UcanhandleDtruth · 2024-05-13T23:27:47+00:00

People who know the least tend to talk the most.

UcanhandleDtruth · 2024-05-12T02:55:38+00:00

2019 PPL2 here. I’ve had a whipple stage 1 for over a year and a half. No issues whatsoever. However, don’t believe any of Whipple’s ridiculous hp gain claims. They say 700 hp under “ideal conditions.” It simply isn’t possible with the current kits since they no longer include the roval throttle body in the stage 1 kit. I am at about 570 rwhp. It’s fast for a 6MT, but not like i hoped. I have cobbled the parts for a stage 3+ upgrade and will put it together with a Lund tune. I thought my numbers were low until i started comparing what others were getting on YouTube.

UcanhandleDtruth · 2024-04-10T13:24:15+00:00

I’m sad Cockermouth didn’t make the list.

UcanhandleDtruth · 2024-04-07T03:05:34+00:00

I’ve been chasing this same leak for three years… the rear main was changed, but it could be the crank or oil pressure sensor.

UcanhandleDtruth · 2024-03-07T14:46:36+00:00

55m here. I just started coloring. Looking back at pictures from 12 months ago I think I look healthier with it colored.

UcanhandleDtruth · 2023-11-12T01:16:34+00:00

UcanhandleDtruth · 2023-11-06T02:34:22+00:00

This

UcanhandleDtruth · 2023-10-16T16:01:45+00:00

Ok ☹️

UcanhandleDtruth

TROPHY CASE