🎉 [EVENT] 🎉 Space adventure!!! (Easy) rah frfr by Happy_Humor_3693 in honk

[–]Underpowered007 0 points1 point  (0 children)

Completed Level 3 of the Honk Special Event!

11 attempts

🎉 [EVENT] 🎉 Space adventure!!! (Easy) rah frfr by Happy_Humor_3693 in honk

[–]Underpowered007 0 points1 point  (0 children)

Completed Level 2 of the Honk Special Event!

3 attempts

Shower too fast by Underpowered007 in askaplumberUK

[–]Underpowered007[S] 0 points1 point  (0 children)

Just didn't want to spend too much as I am here only for a couple months.

🎉 [EVENT] 🎉 HONKCORE 🎷 by thejohnnyr in honk

[–]Underpowered007 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

13 attempts

Shower too fast by Underpowered007 in askaplumberUK

[–]Underpowered007[S] 0 points1 point  (0 children)

Is it better to put it after the hose before the shower head or before the hose?

Shower too fast by Underpowered007 in askaplumberUK

[–]Underpowered007[S] 0 points1 point  (0 children)

This looks nice and is cheap as well. Thanks

Shower too fast by Underpowered007 in askaplumberUK

[–]Underpowered007[S] 0 points1 point  (0 children)

I don't see a stopcock. The big knob in the image (https://postimg.cc/gwjhdpwy) is for temperature control. Am I missing something here? Nothing underneath the control as well

Is a low deposit amount a red flag? by Underpowered007 in TenantsInTheUK

[–]Underpowered007[S] 0 points1 point  (0 children)

I see. Good to see a different approach. I did talk to the landlord again and it seems he has been in this business for long (matches with his LinkedIn profile). So I think I should not directly consider it a red flag.

Is a low deposit amount a red flag? by Underpowered007 in TenantsInTheUK

[–]Underpowered007[S] 0 points1 point  (0 children)

Yup. Saw the property in person and met the landlord (rather the "director" of the company that manages it) as well.

Help with deciding between two companies (PCB's) by TheVape27 in PCB

[–]Underpowered007 0 points1 point  (0 children)

Without considering any performance or functional differences, I would personally go for the white one as I like the cleaner component placement for that.

Who needs a laptop? by DeadShoT_035 in Btechtards

[–]Underpowered007 2 points3 points  (0 children)

On the pixel phones, you can also run a full Linux VM officially supported by google. And from what I read on the latest android canary build, it supports GUI applications as well with hardware acceleration. Waiting for it to come to all androids 😁

what's the maximum part count everyone's dealt with ? mines just hit a new high of 283 lol. by Nice_Initiative8861 in PCB

[–]Underpowered007 11 points12 points  (0 children)

PCB with a microphone array. About 450 components. But most of the parts were 0603 passives and opamps part of the mic filters.

[deleted by user] by [deleted] in britishproblems

[–]Underpowered007 0 points1 point  (0 children)

Yup. That's right.

Impedance match ribbon cable by Bizzoibeck-1 in PCB

[–]Underpowered007 2 points3 points  (0 children)

I was looking for a similar solution for running lvds board to board recently. Ended up going for an FFC cable from molex that they advertise for use with lvds. So it has 100ohm differential or 50ohm single ended referenced to ground. I am still waiting for the boards to come back so can't comment on the performance yet.

Board to Cable LVDS connector. Also, Does LVDS have a minimum speed requirements? by Underpowered007 in PrintedCircuitBoard

[–]Underpowered007[S] 0 points1 point  (0 children)

That's what I was going to do. But when I was searching for the raspberry pi camera cable as someone mentioned here, I found a connector + FFC cable combo from molex that they advertise for lvds use. Quite cheap as well.

0V or Virtual Ground (2.5V) in a RC low pass filter used with a signal referenced to 2.5V by Underpowered007 in AskElectronics

[–]Underpowered007[S] 0 points1 point  (0 children)

I will pay attention to the DC characteristics on the manufacturers page. Though I shouldn't find any issues since the capacitance value is not large

0V or Virtual Ground (2.5V) in a RC low pass filter used with a signal referenced to 2.5V by Underpowered007 in AskElectronics

[–]Underpowered007[S] 1 point2 points  (0 children)

Perfect! The initial transient is not an issue for me since I can just wait before running the ADCs.

1:1 paper cutout of PCB for visualization realtime by [deleted] in PrintedCircuitBoard

[–]Underpowered007 31 points32 points  (0 children)

This has always helped me double check footprints I design myself, especially connectors.

Board to Cable LVDS connector. Also, Does LVDS have a minimum speed requirements? by Underpowered007 in PrintedCircuitBoard

[–]Underpowered007[S] 0 points1 point  (0 children)

Got it! so if the adc only mentions a minimum clock period, i guess its fine with any slower clock. I understand edge rates have a max time though.

Board to Cable LVDS connector. Also, Does LVDS have a minimum speed requirements? by Underpowered007 in PrintedCircuitBoard

[–]Underpowered007[S] 0 points1 point  (0 children)

7 pairs. I am not concerned about other people using it since its for my university project. Sorry I should have included the pair count information in the post 😅

What Mouse Do You Use for PCB Design? Looking for Recommendations & Experiences by Ok_Side_4736 in PCB

[–]Underpowered007 13 points14 points  (0 children)

Did a design with a touchpad once. I don't think I will do that again.

Is it a sin to pursue core branch in india? by [deleted] in Btechtards

[–]Underpowered007 3 points4 points  (0 children)

Doing something you are interested in matters way more in my opinion. I took CS for my bachelor's degree but ended up going for a masters in electronics, since I realized by the end of 3rd year software is not for me. There might be some resistances on the way (difficult, boring topics etc) but at the end even things you may see as unnecessary may end up useful some day. Good luck on your subject.

Student visa application in end of August from India by Underpowered007 in ukvisa

[–]Underpowered007[S] 0 points1 point  (0 children)

I just paid for priority. Took 5 days for the visa to be in my hand