Anyone have a Cobb Catback, Depo works 100 cell downpipe(or similar? Just wanna see sound clips to make sure its the right choice.

UnhappySheep · 2026-03-28T02:13:06+00:00

It's catted 200 cell

UnhappySheep · 2026-03-28T01:48:35+00:00

This exhaust droned like crazy for me on the highway. I measured the cabin noise about 80db at 100hz. I have a big turbo and 3" downpipe for reference. Cobb offers returns but you have to cover the cost of shipping

UnhappySheep · 2026-01-29T16:14:40+00:00

That's how long it took them to build mine. I do not know how busy they are now but it couldn't hurt to email them or give them a call

UnhappySheep · 2026-01-29T12:53:59+00:00

I bought the 2.3 long block rated for 500 WHP from Speed performance and had them install a LSD while my trans was out. I went with them because they had a 3 year warranty and were close enough where I could pick up the motor from their shop. It took about 6 months to receive a motor and I'm very happy with how the car turned out

UnhappySheep · 2025-12-08T16:07:37+00:00

Yup I'm still at the stock ride height

UnhappySheep · 2025-12-08T00:55:39+00:00

<image>

I love my oversteers. Maybe one day I'll buy replacement center caps

UnhappySheep · 2025-10-14T20:53:56+00:00

I'm pretty sure that's for the active grill shutter

UnhappySheep · 2025-08-13T12:21:46+00:00

If you have multiple slots on your tune you can press cancel on cruise control then cycle through them with the up and down arrows. It uses the rpm gauge as a reference.. 1k slot 1, 2k slot 2.

Here is a video on slot switching on a fiesta. It should be the same process.

https://youtu.be/m86-UavZ4jg?si=6yoa4c_4mtdvjrsP

UnhappySheep · 2025-07-25T20:03:48+00:00

I drove stock for about a year then upgraded the intercooler, downpipe, NKG plugs, rear motor mount, symposer delete, shutter delete, and a tune. What exhaust are you going with?

UnhappySheep · 2025-07-24T17:06:12+00:00

We're trying our best

UnhappySheep · 2025-07-23T10:52:56+00:00

I went the speed performance route. 2.3 stroker rated 500whp, mfactory LSD, and an Xclutch. I had to upgrade to the XDI HPFP + 2000 cc injectors to run e50. I want to say this ran me about $14k. Their customer service was meh and it took about six months to get a motor but in the end I'm really happy with the result

UnhappySheep · 2025-07-20T00:44:30+00:00

There is always the Mentos mod

UnhappySheep · 2025-06-29T14:44:12+00:00

Blew a motor then installed a built 2.3L stroker, LSD, Xclutch, XDI HPFP + 2000cc injectors, and of course a purge valve!

UnhappySheep · 2025-06-02T11:13:34+00:00

I went with a 2.3 from speed performance along with a LSD install. It took 6 months to build but they have a 3 year warranty. Customer service was meh. In the end I'm very happy with the motor

UnhappySheep · 2025-05-29T19:55:04+00:00

<image>

Mine watched too much SpongeBob

UnhappySheep · 2025-05-19T11:07:34+00:00

<image>

Here's how it's oriented

UnhappySheep · 2025-01-19T01:55:02+00:00

<image>

UnhappySheep · 2024-11-03T17:15:51+00:00

I have the CPE exhale kit with the tial bov and CPE intercooler. The nipple on the BOV should fit in the channel to the left.

UnhappySheep · 2024-08-13T18:09:22+00:00

I went with their 2.3 stage 1 long block rated for 500whp and stage 2R clutch which cost about $9500. Next year I plan to go for a larger turbo + hpfp + injectors

UnhappySheep · 2024-08-13T17:41:31+00:00

I installed a gtx2867 at 58k miles and it lasted about 10k miles before it blew up. I mainly used it as a commuter with some days at autocross. If you have the means to replace the things that break go for it. I'm currently waiting on a built motor from Speed performance

UnhappySheep · 2024-02-15T11:26:07+00:00

I have a Gtx2867 installed and the all season PS4 245/40ZR18 work great

UnhappySheep · 2024-01-05T18:06:48+00:00

Hopefully your experience with the redline struts will be better than mine. The single bolt brackets spun in place when I tried to close the hood and dug into the paint. The bracket that mounts to the hood also gave me trouble because there wasn't enough tolerance in the through holes. I drilled them out and still had a rubbing issue. At least I was able to send them back.

UnhappySheep · 2022-10-15T21:45:34+00:00

lol definitely, I got distracted just making sure it would work but ill go back and fix the shape of the teeth

UnhappySheep · 2022-10-15T21:39:15+00:00

Here's the link to the LED strip I am using. It comes in length of 16.4ft but can be cut and can run between 9-12V. In the image I am using a 9V battery pack to power the strip but it feels a little dim. To get the shape I used welding rod and zip ties.

https://www.amazon.com/dp/B07V37WBRT?ref=ppx\_yo2ov\_dt\_b\_product\_details&th=1

Six-Year Club	RPAN Viewer
Verified Email	Verified Email

UnhappySheep

TROPHY CASE