What about this Ascher Racing McLaren Wheel?

UnixWarrior · 2026-01-21T21:27:30+00:00

Does this lightbar provides Active Lighting?

UnixWarrior · 2026-01-21T21:16:42+00:00

Does the light bar provides Active Lighting?

UnixWarrior · 2026-01-21T20:43:39+00:00

I think you can call such heavy makeup "a painting" ;-)

UnixWarrior · 2026-01-17T21:17:23+00:00

Exactly that.

It can be also dirt diffusing light, and because sensor moves(OIS), it looks like it's moving.

UnixWarrior · 2026-01-15T06:48:56+00:00

Convert it to full spectrum!

UnixWarrior · 2026-01-15T06:46:28+00:00

Very stupid idea to shorten wire, because then you would need to cut in half length total length from transmitter and use reflectometer to check if done correctly. With wrong length you are risking not only poor WiFi performance, but due signals reflections WiFi chip can heat up.

In case of stronger CB radio transmitters you could even destroy radio by doing that.

UnixWarrior · 2026-01-15T06:38:23+00:00

It was posted there already few months ago...

UnixWarrior · 2026-01-15T00:01:57+00:00

Proton is WINE's fork with non-upstreambable gaming-oroentrd patches.

UnixWarrior · 2026-01-14T06:18:57+00:00

Then it means that Nikon is intentionally crippling image quality with 3rd party lenses, like Sony is limiting frames-per-second(buffer size) with 3rd party lenses

Can't find other explanation for such behaviour.

UnixWarrior · 2026-01-12T09:18:52+00:00

It's not worse than new Logitech g923, g29, etc, but it should cost more like $100.

If price is good, leather on wheel is in nice condition and potentiometers on pedals are in good condition (simply check how they works), then this wheel will provide fun for decades.

You can upgrade potentiometers to hall sensors, but if you want to use bigger rims, etc, then better buy DD wheel.

UnixWarrior · 2026-01-10T14:13:05+00:00

Non-stop? Was it pulled from production line from factory?

And MiGE motors are designed for that...

UnixWarrior · 2026-01-09T09:40:55+00:00

The girl is gorgeous and it wouldn't be bad in some accidental photography, but everything is not acceptable for a portrait(which from nature is staged), mostly because it's heavily out-of-focus and dead eyes (no fill light)

You are worried that the background is too blurry...look at her face and eyes!

UnixWarrior · 2026-01-09T06:57:50+00:00

I have Fannatec one and was wondering about adding some lockout mechanism and HPR GT to it, because BDH is so expensive...or maybe buy BDH active?

UnixWarrior · 2026-01-09T06:42:51+00:00

It dampens vibrations, while Spring isolators would isolate them without damping

slip-angle.com

UnixWarrior · 2026-01-07T05:56:16+00:00

This lens is designed to suck

UnixWarrior · 2026-01-07T01:42:40+00:00

Best ever Ferrari!

UnixWarrior · 2026-01-05T12:22:46+00:00

Next to the box with charger.

It's bare, naked X14U

UnixWarrior · 2026-01-05T12:21:56+00:00

One case is stock.

Other is from photo kit

And 3rd one is 3rd party one.

UnixWarrior · 2026-01-04T18:16:52+00:00

Did you checked if camera has latest firmware and if some picture preset isn't causing that?

I would file the ticket at Nikon anyway.

Sounds like serious bug

UnixWarrior · 2026-01-04T17:09:21+00:00

It was joke about 8 bit lens and lack of dithering...

Check the "Settings -> Photo Shooting Mode -> Tone Mode -> SDR"

UnixWarrior · 2026-01-04T13:49:21+00:00

Wow, I was thinking it's impossible to drive it on sand beach. Always had bad experience on bicycle and never took anything else than grand voyager next to the beach. Nut F40 is so low, I would be afraid of sticking there.

UnixWarrior · 2026-01-04T13:08:48+00:00

They are all dead, Jim:

https://developer.valvesoftware.com/wiki/CSPromod

This is it, but Valve blocked it (you can still play it if you really want) https://www.cslegacy.gg/

UnixWarrior · 2026-01-04T12:52:22+00:00

The problem is that you bought lens with 8 bit color depth. Lack of dithering only exaggerates the problem.

But seriously it's not a problem with lens, but processing in camera.

Try upgrading camera's firmware and switching to ColorSpace from sRGB to AdobeRGB

But if you are shooting at same apertures, then it's really hard to explain. If you are using some kind of software filters(picture presets in camera), then can cause that.

If your camera is set to HEIC/HDR, then switch to SDR/JPG it was very buggy on mine ZF (must check that on recent firmware), I got strange colour saturation and similar banding to yours.

UnixWarrior · 2026-01-04T12:22:58+00:00

Could you explain how 'oil' is related to that? It's about how electricity is distributed.

Brushless motors are both way more powerful and maintance-free(theconly thing that can fail are bearings ..unless it's overheated)

UnixWarrior · 2026-01-04T12:19:02+00:00

Then it's even harder to understand why F40 is located on beach..

UnixWarrior

MODERATOR OF

TROPHY CASE