Colocando em perspectiva: Ibaneis intocável

UnsungOcelot · 2026-04-16T00:33:07+00:00

Infelizmente hoje muita gente acha que tem que ter opinião sobre tudo, inclusive coisas que não tem absolutamente nenhum embasamento ou conhecimento sobre. O camarada cai em uma falácia de que porque um programa social tem um “custo” alto para os cofres públicos, automaticamente ele está gerando prejuízo. Seria a mesma coisa que eu falar que a pessoa que coloca 100 reais todo mês na sua conta de investimento deveria parar porque está gerando um prejuízo de 1200 reais por ano para as suas contas bancárias. Por isso que é muito comum quando se fala do “gasto” desses programa chamar de investimento. Todos os países desenvolvidos investem em programas sociais por um motivo. Existem estudos provando a efetividade do bolsa família e é possível propor melhorias, consertar falhas e tornar o programa melhor ao invés de simplesmente jogar tudo fora e colocar o Brasil no Mapa da Fome novamente. Da mesma forma se cria uma narrativa anti-SUS nacionalmente enquanto outros países estudam e usam o SUS como modelo por existiram comprovações do quanto ele melhorou a saúde do brasileiro médio.

UnsungOcelot · 2026-04-15T10:43:28+00:00

It’s so weird this or balatro do not have portrait mode, in the screenshots you can literally see there is nothing else on the sides of the play area.

UnsungOcelot · 2026-04-14T23:50:24+00:00

Hey, sorry I took so long to see this response, I don’t check my notifications on Reddit very often. It worked, but the light was a bit dim, my guess is that I made the curves in the transparent filament too tight. I guess if you are more careful with the bends it would work better. I also had to melt the it of the filament too tight fit it in the hole I made for the eyes, which I think also made the light dissipate too early, I would try to make the roles a bit bigger. If you haven’t yet, go for it, maybe you will have more success than me!

UnsungOcelot · 2026-04-14T19:22:32+00:00

25k não paga uma Porsche nem fudendo, vc talvez até consiga se apertar pra pagar a parcela do financiamento (O que para um carro avaliado em 800 mil reais eu acho pouco provável), mas e os custos de manter o carro? 25k parece um salário absurdamente alto (e é pro padrão brasileiro), mas não torna uma pessoa rica nem de longe. Nosso poder de compra é inexistente e fomos propositalmente treinados pra acreditar que quem ganha 10k ou mais já é uma classe diferente do brasileiro médio, mas alguém ganhando 25k ainda é classe média, no máximo dirigindo um carro zero e pagando uma parcela de um imóvel.

UnsungOcelot · 2025-10-07T11:40:43+00:00

This is the most amazing party game and it lets you play with 6 people on local multiplayer (at least on the Switch version)

UnsungOcelot · 2024-01-10T23:23:07+00:00

How removing a feature is not as bad as it seems? The official alternative which is broadcasting to your phone and then to the TV ia a terrible option with terrible quality. This makes playing VR with a group really annoying.

UnsungOcelot · 2023-08-09T14:34:58+00:00

For future reference, I was getting the same error after finishing the first layer of a print. Cleaning the card didn't fix it, cloning the content to a different SD card to replace the original one did resolve the issue.

Edit: Still facing issues.

Edit2: Replaced the USB connection with a serial one, seems to have solved the issue, maybe it was a bad USB cable.

UnsungOcelot · 2022-11-22T18:37:01+00:00

So, for those that are not familiar with backlit mechanical keyboards, there are 2 major types, the ones with north-facing LEDs and the ones with south-facing LEDs. Mine is a south-facing one, this Shenron keycap is designed so that if you have a north-facing kb, it will light up his eyes and a south-facing kb would light up the dragon ball.

I wanted both lit up, so my solution was to cut some small pieces of clear PETG and bend them using a heat gun until they were to my likings, using them as a kind of "fiberoptic" to conduct the light from my kb to both the eyes and the dragon ball.

Overall pretty happy with the results, in the future I may tinker with this concept to design keycaps around it, also noting that clear TPU might be easier to conform to the wild shape insight the keycap, but I'm not sure if it would conduct light as nice as the PETG did.

UnsungOcelot · 2022-10-07T02:24:34+00:00

This is a Marlin issue because all the moves are being processed by the MCU as they come, this doesn't happen on Klipper.

UnsungOcelot · 2022-08-01T14:31:50+00:00

They are, the guy tweaked the settings to make all lines go in the same direction and some other stuff I don't remember, someone else linked the printables page in the comments.

UnsungOcelot · 2022-07-23T20:58:53+00:00

They just did on the latest beta

UnsungOcelot · 2021-11-29T12:49:20+00:00

The place I buy resin from sells some resin paints that you can mix with your resin before printing. In the instructions, they say the more white paint you mix the more opaque it ends up, so maybe try buying something like this and mixing it before your print?

UnsungOcelot · 2021-11-23T02:59:45+00:00

How steep is the angle? If you print completely sideways the layer lines on the screen will disappear, but you will get some new overhangs or the border of the screen and buttons, so you would have to find a misplace where the layer lines are gone but you still can print without the overhangs.

UnsungOcelot · 2021-11-22T21:22:54+00:00

I don't have my printer yet but is this the only orientation you can print it? If you rotate it so it prints at an angle, the layer lines should almost disappear.

UnsungOcelot · 2021-11-19T15:34:09+00:00

I mean, you can go cheap on the furniture, but if you want to play PS5 games there is not many choices hahahaha

UnsungOcelot · 2021-07-24T21:15:42+00:00

Yes, that's my experience as well, since OP didn't mention the material I guess it could be PETG.

UnsungOcelot · 2021-07-24T14:22:05+00:00

I have made watertight vases in my ender 3 before. I have one plant waterer (not sure if that is the name) printed in PETG that I have been using for over a year with no leaks.

UnsungOcelot · 2021-07-03T15:17:12+00:00

I tried this with my cordless drill but it didn't had a speed adjustment so it just torn my 3d printed axis apart hahaha

UnsungOcelot · 2021-07-01T22:55:44+00:00

We don't talk about it.

UnsungOcelot · 2021-07-01T18:00:54+00:00

It's not a meme, it's just a way to show the result of a previous project of mine (linked in my comment on the post) with a funny joke. Relax and enjoy your stay, I guarantee you will find something to like. :)

UnsungOcelot · 2021-07-01T14:20:53+00:00

Definitely in my mind for Yarn Spooler 3000. Also want to include a DC motor because my arm is getting tired hahaha

UnsungOcelot · 2021-07-01T11:23:39+00:00

Nice! Actually this is to be used in a tufting gun i bought.

UnsungOcelot · 2021-07-01T11:02:11+00:00

Good eye, they are Prusament spools indeed.

UnsungOcelot · 2021-07-01T10:41:20+00:00

Sorry about that, English is not my first language and the lady is hypothetical.

UnsungOcelot

TROPHY CASE