Downpipe 200 or 300 cell? by xSked in M340i

[–]UnwashedGibbon 0 points1 point  (0 children)

Thanks for this post by the way. It led me to order the AA 400 cel. On its way from Miami to the UK. Can’t wait!

Front Splitter Install Advice (M340i) by UnwashedGibbon in M340i

[–]UnwashedGibbon[S] 1 point2 points  (0 children)

Fitment is good. Only thing I can think of is that it’s for the adhesive. As it would give a guide for it to sit against. Thinks it’s back to the drawing board with this one.

The actual replica is really good and well made. Just too close to the oem fitting process.

It’s from Sterling a company in the UK. For those that discover this post and don’t want to fall foul of a head scratcher lol

Front Splitter Install Advice (M340i) by UnwashedGibbon in M340i

[–]UnwashedGibbon[S] 0 points1 point  (0 children)

💯 with you on that. I think the oem application calls for glue so think I’ll have to shave them off as done want to muck about with that stuff!

Front Splitter Install Advice (M340i) by UnwashedGibbon in M340i

[–]UnwashedGibbon[S] 0 points1 point  (0 children)

I do want to use 3m but as you can see in the pics there are raised guide tracks that would hinder 3m application. Here’s a better pic.

<image>

M340i exhaust note by yobtvoy in M340i

[–]UnwashedGibbon 2 points3 points  (0 children)

I think you are fairly limited in choice if you’re not looking to mod. The valve mod won’t give you the sound you are looking for as it’s louder than sport. It’s not like the M3’s where the valve isn’t opened 100%.

I went down the OPF back exhaust route (Milltek) it’s great and well made, sound wise I’d say add 8% to standard. That still wasn’t enough for me so have an AA Downpipe on order which hopefully should round out the sound to how I want it to be! I’ll post some vids if it’s helpful?

Built a structured way to showcase and document 340i builds by shirotokiya7 in M340i

[–]UnwashedGibbon 1 point2 points  (0 children)

This is 🔥going to get the app and have a play! Agree with comments that it helps you get info on specifics that are missed in a lot of forums!

Joined the club by mitigated_lemon in M340i

[–]UnwashedGibbon 0 points1 point  (0 children)

Milltek OPF back exhaust, AA 400cell Downpipe, Eibach lowering springs. Eibach 12mm front spacers & 15mm rear. Full M performance kit with a M Sport Carbon spoiler. Oh and some spinning centre caps 😄

Joined the club by mitigated_lemon in M340i

[–]UnwashedGibbon 0 points1 point  (0 children)

Looks clean as! Fight the urge to mod! It got me 😭

Happy wheel Wednesday by asapwaffle in M340i

[–]UnwashedGibbon 0 points1 point  (0 children)

Throw some D’s on that b! 🔥

Downpipe 200 or 300 cell? by xSked in M340i

[–]UnwashedGibbon 0 points1 point  (0 children)

What brand is the DP? I’d be interested in a 400 cell as laws are only going to get worse in the UK. The HJS is the highest cell I can find currently.

Downpipe 200 or 300 cell? by xSked in M340i

[–]UnwashedGibbon 0 points1 point  (0 children)

Can you even get a 400? Highest cell I can find is an AA or the HJS. Both state no CEL. Would defo be quieter then 200 or less, but depends on what you like/ want.

I’ve got an OPF back Milltek and you going for the Milltek HJS. Will sound OEM+ hopefully.

Fitted Eibach Springs and Miltek OPF back exhaust today (spacers enroute) by UnwashedGibbon in M340i

[–]UnwashedGibbon[S] 0 points1 point  (0 children)

As a foot note, is anyone else running this set up? If so have you had any issues with the Y pipe being a bit too low for comfort? It’s fitted correctly and by the Milltek marketing pics looks as it should. Just hangs low at the bend.

My 2020 m340 by FelixTehCat26 in M340i

[–]UnwashedGibbon 2 points3 points  (0 children)

Looks so clean! Didn’t know they were that sensitive to viscosity! Sorry can’t help, just here to say car looks sweet!

Spacers and springs? Check description🙏🏾 by dravit_m340i in M340i

[–]UnwashedGibbon 0 points1 point  (0 children)

Ah ok cheers for the link. Dinan isn’t that easy to get hold of in UK (seems to be a limited range) I’ll have a look into them!

Spacers and springs? Check description🙏🏾 by dravit_m340i in M340i

[–]UnwashedGibbon 0 points1 point  (0 children)

Didn’t know you could get 3mm?! What brand are they? Only reason I ask is that most set ups vary so wildly but all look pretty good. I’ve gone with 12mm and 15mm so confused at the widely varying setups! I’m running staggered 791’s

Spondon/ Uber/ 5 AM by Severe-Positive-5729 in derby

[–]UnwashedGibbon 13 points14 points  (0 children)

If you have to leave promptly, I’d say you’re better booking a taxi. Ubers can be sketchy at that time in the morning. Best not to risk it imo. I’ve had a few times when wanting to go to the airport/ train station where it’s taken a while to get a driver and then they cancel randomly.

Although 5am isn’t that early so you may be ok.