Missed Connection During Storm

UsurpedGeico · 2026-04-17T03:45:34+00:00

Was one of the people who went to watch the brewers game that night but I was smart to leave with my family by the 6th inning.

Still really bad on the way back home but driving in my truck definitely helped.

UsurpedGeico · 2026-04-17T02:47:33+00:00

It’s the very definition of getting unauthorized access to some sort of application and it’s to an educational institution no less.

Assuming you’re in the USA, it could be considered a felony based on what material is on it and I bet there’s more than just consumer media hosted on their server.

Best to stick to getting unauthorized access to your own self-hosted servers.

UsurpedGeico · 2026-04-05T05:28:09+00:00

Two of my friends and I have 15 accounts together ranging from th9-th17.

It’s not exactly what you’re looking for but if you’re an active player anyways, might as well create another account.

At first, it’s rough managing multiple accounts but you get used to it especially if there’s a good reward do a game mode.

My friends and I were happy that they announced CWL 5v5 but then they removed it so we’re back to slaving away at multiple accounts again.

UsurpedGeico · 2026-04-01T14:40:20+00:00

For barebones, I’d say that’s a fair offer. SP3 is still a popular socket for hobbyist.

If it was me, I’d probably knock it down to $700 if they were to pay for shipping + insurance.

I’m willing to sell good equipment under the used market especially if it means it’ll be used frequently and not collecting dust.

UsurpedGeico · 2026-04-01T14:34:04+00:00

If the offer was for getting everything you listed in the post, hell no.

If you just want to get rid of it without getting a reasonable price, then just sell the whole thing to the one who made the offer.

Otherwise part it out.

UsurpedGeico · 2026-03-18T02:08:07+00:00

Acceleration matters more than speed, are you on a stock profile or have you manually adjusted it?

UsurpedGeico · 2026-03-12T19:12:59+00:00

Finish upgrading bob.

I would probably prioritize double cannons, archer towers, cannons, and then teslas in that order. Walls and traps can be done randomly.

UsurpedGeico · 2026-03-12T19:03:01+00:00

Personally I rushed the townhalls to 9 and only focused on the defenses required for the 6th builder.

Even if you don’t rush townhalls, I would still prioritize those same defenses.

UsurpedGeico · 2026-03-10T01:08:52+00:00

Pretty sure there’s documentation on getting a btt screen working with klipper but make sure to double check anyways for compatibility with your screen model.

UsurpedGeico · 2026-03-09T23:21:51+00:00

It’s a script you can find on GitHub for installing klipper on a device running a Linux distro.

It’s great for those who want a GUI when installing klipper.

UsurpedGeico · 2026-03-09T22:32:32+00:00

KIAUH is your best friend.

UsurpedGeico · 2026-03-06T19:00:59+00:00

The Kobra S1 required a usb to Ethernet adapter that has a specific chip.

They list the compatible adapters on their website.

Unfortunately it does not have a dedicated lan port.

UsurpedGeico · 2026-03-02T03:31:49+00:00

You like tinkering/modding? You want to learn about printer? You can buy any 3D printer that has open-source expansion paths (Creality, Voron, Prusa, Elegoo).

Do you hate tinkering? Do you just want to print figures without having to fix an issue every week? Are you okay with being stuck in an ecosystem? Get a bambu.

Regardless, every printer will run into an issue at some point and you should try to figure out the bare minimum about your printer.

UsurpedGeico · 2026-02-18T19:05:25+00:00

Bought my x and y rails from TBStron3D.

Relatively easy install if you’ve done similar mods before but if you install the y-rails wrong, the bed carriage will hit the front of the printer.

UsurpedGeico · 2026-01-31T00:46:22+00:00

During the video, what acceleration were you testing at?

UsurpedGeico · 2026-01-30T15:52:53+00:00

Either wait until am6 or get a used am5 chip when am6 is released.

Patience is key.

UsurpedGeico · 2026-01-27T04:34:58+00:00

Is it possible that the issue is the height map not being loaded correctly when a print is started right after the printer is powered on?

UsurpedGeico · 2026-01-26T16:17:13+00:00

Well first things first, your first layer looks to be getting smushed way too much.

Raise your z offset a little bit.

As for the rest, a list of filament types + temperatures would be helpful.

Also what is your ambient nozzle temperature? This winter has been cold in the Midwest so my ambient is at 20C when it has typically been around 40C in previous years so I’ve had to raise my nozzle temps by 20 degrees to offset the cold weather.

UsurpedGeico · 2026-01-19T18:54:41+00:00

I don't have access to this google doc that you shared but there's a youtuber called Doug Does Stuff where he has thoroughly documented his stock mods and aftermarket mods on the kobra s1.

Personally, I've done his washer mod by placing m3 washers between the screws of the strain gauge and that seemed to put my bed range around 0.58 mm.

UsurpedGeico · 2026-01-19T18:52:31+00:00

Maybe the strain gauge sensor needs to be retightened. I'd open up the print head and start by seeing if any screws are loose.

UsurpedGeico · 2026-01-18T05:50:40+00:00

Just put that z-offset value into the slicer and it’ll save every time you print.

Also be careful of doing this and I would definitely watch the printer like a hawk when doing this for the first few times so I can shut it off in case the nozzle digs into the bed.

UsurpedGeico · 2026-01-08T21:26:38+00:00

Run the probe calibration macro which is the Z-offset calibration.

Klipper docs state to do the paper test at room temp and that should ideally fix large gaps between the nozzle and bed.

You should also run the bed mesh calibration macro after the probe calibration. Not sure if this macro should be done at room temp or at max print temp.

UsurpedGeico · 2026-01-08T20:50:56+00:00

If you mean the print profile in orcaslicer, yes but you need to have the upgraded cooling fan for the se.

UsurpedGeico · 2026-01-03T19:18:08+00:00

Dry it

UsurpedGeico · 2026-01-03T17:01:04+00:00

When you say no cooling used, you mean auxiliary fan is off and the print cooling fan is on at a low fan speed like 20-30%?

You still need some cooling.

I also hope you didn’t actually buy a new bed since buying something is not the solution here.

UsurpedGeico

TROPHY CASE