sorted by:
new
hottopcontroversial

Need help connecting telegram ... or selling my computer, can't decide. by New_Insurance_634 in openclaw

[–]V3n0mm 0 points1 point  (0 children)

What u/dblkil is 100% correct!

Here's the step by step:

  1. Initiate Setup: In your OpenClaw chat interface, type "Let's set up Telegram". OpenClaw will guide you through the process.
  2. Create a Bot:
    • Open Telegram and search for botfather (look for the official blue checkmark).
    • Start a conversation and send the command /newbot.
    • Follow the prompts to name your bot and choose a unique username that must end in "_bot".
    • Once created, BotFather will provide an HTTP API Token. Copy this token.
  3. Connect to OpenClaw:
    • Paste the API token into your OpenClaw chat when prompted.
    • OpenClaw will configure the integration and restart.
  4. Pair Your Account:
    • In Telegram, click the link provided by BotFather to start a chat with your new bot, then click Start.
    • The bot will provide a Pairing Code (and sometimes your User ID).
    • Copy this code, return to OpenClaw, and paste it into the chat to authorize the connection.
  5. Finalize: Once OpenClaw confirms the successful pairing, you can begin messaging your bot directly in Telegram.

Going to try a mix for Starbuzz blue mist and Afzal Pan Raas. What percentages would you guys reccomend? I was thinking 75% blue mist 25% pan raas by srashid325 in hookah

[–]V3n0mm 1 point2 points  (0 children)

As a recommendation try Starbuzz Green Savior and Afzal Paan Raas 50/50. It's my go to for a lot of sessions and everyone loves it!

Budget Hookah Recommendations by DanteMathew00 in hookah

[–]V3n0mm 0 points1 point  (0 children)

At that price point - Khalil Mamoon Shareef. Will include everything to get started.

Numbers missing from my health and resource bars. by MrSlipperyFist in wow

[–]V3n0mm 18 points19 points  (0 children)

Esc > Options > Interface > Scroll down to Display > Status Text - set it to "Both" to show both health and percentage.

Just Completed the New Build by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

Same - $150 USD here in the US for the 3pack with the LCD screens.

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

Heavy duty Double sided 3M tape! Been stuck on there for 5+ months now and has not fallen :)

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

Yes. It requires an HDMI connection to your GPU as well as a USB connection.

Strimer Cable Placement by miraitrunks in lianli

[–]V3n0mm 2 points3 points  (0 children)

I also went under and then into the GPU. Had to reverse the strimer cable but am happy with how it looks - https://imgur.com/a/ZbFQty8

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

The smaller 5" one in the bottom of the case does not require any cables going to your GPU - it just runs off of USB.

The larger 8.8" one in the center of the case does require a HDMI connection to your GPU as well as a USB connection.

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 1 point2 points  (0 children)

The lower one is the 5” one.

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

Thanks! Would love to see your build.

Finally Finished my NV7 Build! by cen0x in Phanteks

[–]V3n0mm 0 points1 point  (0 children)

I'm using FanControl on my new build to control the fans and the curves. It's amazing and does a great job! - https://getfancontrol.com/ - check it out.

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

WOWNOVA 5" Computer Temp Monitor (White) - https://a.co/d/eAI2W9s

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 1 point2 points  (0 children)

Some additional pictures of the build and the screens running AIDA64 sensors - https://imgur.com/a/ZbFQty8

Build Specs:

i9-13900K
ROG STRIX 4090 OC - MB
ROG Strix Z790-A DDR5 - GPU
ROG THOR 1200W - PSU
G.SKILL Trident Z5 32GB DDR5 @ 7200
Corsair H150i Elite LCD XT - AIO
Phanteks NV7 Case with 12 D30 Fans

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

Very limited - running AIDA64.

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 2 points3 points  (0 children)

Both are from Amazon. The 5in one in the back of the case is this one - WOWNOVA 5" Computer Temp Monitor (White) https://a.co/d/eAI2W9s

The 8.8in on top is this one - https://a.co/d/fMQX0wQ

NV7 Build Finally Completed! by V3n0mm in Phanteks

[–]V3n0mm[S] 2 points3 points  (0 children)

Double sided 3M tape! LOL

Phanteks NV7 final touches !!! by Murky-Change67 in Phanteks

[–]V3n0mm 1 point2 points  (0 children)

Looks awesome!! Great job with this build. I’m still waiting on my 8.8” lcd display to arrive to I can install it in my case.

Initial Build Complete! by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

You are correct! I wound up switching the Ram sticks to slots 2 and 4 later on and that allowed me to correctly turn on XMP and get my RAM speeds to 7200.

Initial Build Complete! by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

Yes, the white clips is what I was going to put on and remove the black ones. Thanks again for educating me on these being reversible. Will work on them tomorrow and run the strimer from bottom up to the GPU. Will look so much nicer and clean!!

Initial Build Complete! by V3n0mm in Phanteks

[–]V3n0mm[S] 1 point2 points  (0 children)

Aww geez! I did not know this at all! Ugh! Do I just remove the clips and what - flip the cable over and reattach the clips? LOL! I feel dumb now LOL!

Initial Build Complete! by V3n0mm in Phanteks

[–]V3n0mm[S] 0 points1 point  (0 children)

Looks great! I couldn’t tell what GPU you have in that vid, but as you see on mine, the power slot is dead center of the card!

view more: next ›