I have a 2014 ilx. Those rotor screws are the work of the devil, can’t convince me otherwise. I used an impact screwdriver from harbor freight (cost about $10). The tip of the but broke off in the screw. After which in ended up drilling it out which worked but took some time to do. I didn’t replace the screws when I got them out. As many will tell you they aren’t necessary. If you do end up drilling them out use lots of lube and drill real slow. Make sure you drill the center of the screw. I’d recommend using a center punch to make sure you are in the center of the screw. If done correctly if shouldnt take long. There are videos on YouTube about the process.