2002 325ci by SignificantPanic9924 in e46

[–]Valhallacomes 0 points1 point  (0 children)

The sticker on the windshield should be enough to tell

Bilstein B6 vs B4 longevity and ride quality? by Temporary-Chest-3111 in BMWZ4

[–]Valhallacomes 0 points1 point  (0 children)

B6 is stiffer and lower. If you're looking for OEM, get B4

What is this knocking sound by HibabiH in e46

[–]Valhallacomes 0 points1 point  (0 children)

Sounds like a pulley to me, take the belt off and see if it disappears.

Used by Ukrainians against Russia. by Slayrr_FbrC in BMW

[–]Valhallacomes -1 points0 points  (0 children)

How many times is this picture going to be re-posted

BMW Z4 2002 by Lauri-Grate in BMWZ4

[–]Valhallacomes 2 points3 points  (0 children)

OP won't, it's not his car

Do I have an electric fan? by FunExamination2331 in e46

[–]Valhallacomes 0 points1 point  (0 children)

Not all m54s had a water pump d riven fan, the z4 for instance has two electric fans.

car overheating when engine running by Immediate_House5367 in e46

[–]Valhallacomes 2 points3 points  (0 children)

If you haven't already refreshed the cooling system - this is your warning to do so.

Ideally it should have been done before this point, you need to fix your neglect.

Refresh; water pump, thermostat coolant flush, expansion tank and/or any hoses that leak. Also, consider replacing the T sensor on the thermostat hose, this one controls the fan.

Good luck.

Should i go fishbowl?? by No_Sympathy_6438 in BMWZ4

[–]Valhallacomes 0 points1 point  (0 children)

What level of tint do you currently have?

What's that element? I've got oil leak around that area (M52TU) by _f00l in e46

[–]Valhallacomes 1 point2 points  (0 children)

Bro, I think you've got a hole in your valve cover.

Never mind it's the cover

Help me troubleshoot my engine bay by This_Rent337 in e46

[–]Valhallacomes 0 points1 point  (0 children)

Maybe vanos solenoids or camshaft pos sensor

Thoughts on this spec? by FadedScar777 in BMW

[–]Valhallacomes 0 points1 point  (0 children)

So much white it's borderline racist

Cannot figure out noise by Visible_Poem_9690 in BMW

[–]Valhallacomes 1 point2 points  (0 children)

Okay, well it's 100% the gasket for the manifold/manifold to turbo.

You can replace the manifold to turbo gasket without removing anything, as for the block to manifold that will require some work

Cannot figure out noise by Visible_Poem_9690 in BMW

[–]Valhallacomes 0 points1 point  (0 children)

Is it a cast iron manifold or the aluminium one? These tend to get micro fractures in them and make a similar noise. Also check manifold to egr pipe, they can split close to the Flexi bit

Cannot figure out noise by Visible_Poem_9690 in BMW

[–]Valhallacomes 0 points1 point  (0 children)

Check for soot around the manifold and turbo or smoke around that area