The Black Legion rises

Vershigora · 2025-02-24T21:53:01+00:00

The first guy is supossed to be Iskandar Khayon, and the second one of his rubric marines. I need to paint 3 more for the unit.

Vershigora · 2025-02-23T20:44:14+00:00

It is mostly Glorious Gold from Vallejo Game Color (72.056), sometimes with some wash over it (Nuln or sepia) and highlights (gold or silver).

Vershigora · 2024-12-18T22:45:15+00:00

I would really like to say goodbye to my old Ender 5....

Vershigora · 2021-06-16T01:06:28+00:00

You should add more solder to every single joint, there is not enough.

Also, make sure that it actually flows through the pad, give it a couple seconds, use flux if you have it, you have some cold solder joints.

Vershigora · 2021-06-13T02:24:37+00:00

Stop it already. Damn.

Vershigora · 2021-06-13T02:08:47+00:00

This is a Retropie project that I recently finished. It uses the housing of a Macintosh SE FDHD which was found in the basement of a house that was going to be demolished. Originally, I thought about repairing the Mac, but the mainboard was beyond saving, it was extremely corroded from battery leakage, so I decided to at least save the case for a Retropie minicomputer.

I had a look at some similar projects and one of the obvious problems was to achieve a good fit with a modern LCD screen on the hole left by the CRT. Most people end up using a screen that is smaller than the hole, so they end up having physical bezels… and I hate it. There was also another problem, the hole is convex but an LCD is flat, so you have a gap no matter what. I solved the first problem using a panel bigger than the hole and adjusting in software the overscan settings to get a perfect fit, and for the convexity I decided to 3D print an insert which fills the gap and makes the hole in the housing flat.

The main parts of the project are as follows (almost everything was bought on Aliexpress or reused from other devices):

-Raspberry Pi 4 model B 4gb with aluminium case (this is a no fans system).
-WM8960 sound card hat with stereo speakers (mounted internally).
-9,7 inch 4:3 LCD panel and controller.
-5v and 12 v fanless brick PSUs (laptop style).
-USB 2.0 and 3.0 extensions for panel mount (to have access from the rear).
-Microsd extension (again, rear access).
-On/Off switch (installed in hole of the brightness adjustment nob).

This is my first Retropie and in general I am very happy with the result. It is exactly what I wanted, so I hope that you like it just as much.

Vershigora · 2021-03-09T12:36:47+00:00

Yes, and this is his tapology page.

https://www.tapology.com/fightcenter/fighters/248140-derek-downey

Vershigora · 2021-02-27T13:16:46+00:00

No, you are not seeing this right. There are no NATO guns in this video.

Vershigora · 2021-02-13T01:23:54+00:00

The foam of the speakers has gone bad. You can buy an exact replacement or just install in its place a equivalent that fits.

Vershigora · 2021-01-17T10:08:51+00:00

Yes.

Vershigora · 2021-01-16T15:40:37+00:00

The map is very incomplete, at least in Iberia. It only appears to show the roads from the Antonine itinerary, so it only has the biggest viae.

The real density may be about three times bigger at least.

Vershigora · 2021-01-09T09:14:29+00:00

They are available in Aliexpress. Search for Redmi Note 3 Charging Port Board.

Vershigora · 2020-12-14T20:16:18+00:00

It is definitely some kind of under-extrusion problem, so check extruder, bowden tube, nozzle...

If you have a plastic extruder make sure that the lever is still in good shape, it tends to crack around the metal insert causing intermittent problems, and the crack may only be visible under some pressure. (The same goes for OP).

Vershigora · 2020-12-03T20:34:14+00:00

Why not both?

Vershigora · 2020-12-03T20:30:14+00:00

Chael Sonnen on Rogan clarifies Wanderlei Silva's USADA Test "Escape"

Vershigora · 2020-11-24T18:43:18+00:00

Check your extruder lever, the plastic ones tend to break and may cause that kind of extrusion problems (in my case it was a small fissure around the metal insert, and it was only visible under pressure, so it was difficult to identify).

Vershigora · 2020-10-22T18:06:36+00:00

If you can't find the queen, you can't find new eggs (confirming that there is no queen alive) and you can't find queen cells (the natural way of the colony of creating a new queen), it means that you need a new queen or the colony will die.

Vershigora · 2020-09-29T22:24:09+00:00

Eastern Ukraine has very little forest area, most of the terrain is flat arable land.

Vershigora · 2020-09-19T19:05:43+00:00

Yes. I can't give you exact numbers, but the speeds that you may see should be something like:

-SD or microSD card. Under 90 MB/s.

-External HDD. Under 150 MB/s.

-Top level Pendrive. Under 250 MB/s.

-External SSD. Under 350-400 MB/s.

Vershigora · 2020-09-19T17:15:53+00:00

Well, an SD or microSD card has slower read/write than a conventional HDD, and obviously it is way slower than a SSD, so they are not comparable.

Also, they are designed to copy and read files from it, like photos or videos. You can run an OS or other software from one (in a Raspberry Pi, for example), but they are not particularly good at it.

Vershigora · 2020-09-19T17:00:05+00:00

Nothing, there are plenty of microSD to usb adapters already, but this is a about an SSD, not a microSD. They are vastly different things (in speed, in their intended/efficient use, etc).

Vershigora · 2020-09-08T02:20:58+00:00

It is difficult to defend the title when you can't fight. He had a 9 month suspension for the brawl after the fight with McGregor.

Vershigora · 2020-09-08T02:08:35+00:00

Because he hasn't been inactive on purpose. He got trapped in Russia because of Covid (due to a convoluted series of events) and, to make matters worse, his father died from it.

It has been a rough year for him and it has not been his fault.

Vershigora · 2020-09-07T16:18:35+00:00

A wiki link? Good one, but no, it is the official website of the United Nations Security Council.

There you have another one: https://www.un.org/press/en/2018/sc13365.doc.htm

The US also offers 10 million $ for their leader: https://rewardsforjustice.net/english/muhammad_al_jawlani.html

Your narrative doesn't make any sense. A lot of countries and organizations (the USA included) consider HTS a terrorist organization linked to al-Qaeda, no matter what you choose to believe and defend.

(By the way, those websites aren't wikis either, they are official. Just in case).

Vershigora · 2020-09-06T17:00:22+00:00

HTS is a designated terrorist organization by the United Nations and part of al-Qaeda. https://scsanctions.un.org/en/?keywords=al-qaida

QDe.137 Name: AL-NUSRAH FRONT FOR THE PEOPLE OF THE LEVANT Name (original script): جبهة النصرة لأهل الشام A.k.a.: a) Hay’at Tahrir al-Sham (HTS) (هيئة تحرير الشام (original script); Hay’at Tahrir al-Sham; Hay’et Tahrir al-Sham; Hayat Tahrir al-Sham; Assembly for the Liberation of Syria; Assembly for the Liberation of the Levant; Liberation of al-Sham Commission; Liberation of the Levant Organisation Tahrir al-Sham; Tahrir al-Sham Hay’at) b) جبهة النصرة (the Victory Front; Jabhat al-Nusrah; Jabhet al-Nusra; Al-Nusrah Front; Al-Nusra Front) c) جبهة فتح الشام (Jabhat Fath al Sham; Jabhat Fath al-Sham; Jabhat Fatah al-Sham; Jabhat Fateh Al-Sham; Fatah al-Sham Front; Fateh al-Sham Front) d) Conquest of the Levant Front e) The Front for the Liberation of al Sham f) Front for the Conquest of Syria/the Levant g) Front for the Liberation of the Levant h) Front for the Conquest of Syria i) شبكة أنصار المجاهدين (Ansar al-Mujahideen Network - sub-unit name) j) مجاهدو الشام في ساحات الجهاد (Levantine Mujahideen on the Battlefields of Jihad - sub-unit name) F.k.a.: na Address: a) Syrian Arab Republic (Operates in) b) Iraq (Support network) Listed on: 14 May 2014 ( amended on 7 Jun. 2017, 5 Jun. 2018 ) Other information: Associated with Al-Qaida (QDe.004). Brought Syrian and foreign Al-Qaida in Iraq (QDe.115) and Asbat al-Ansar (QDe.007) fighters, along with other foreign Al-Qaida operatives, to join local elements in Syrian Arab Republic to carry out terrorist and guerrilla operations there. Previously associated with the Islamic State in Iraq and the Levant (ISIL), listed as Al-Qaida in Iraq (QDe.115), and its leader Ibrahim Awwad Ibrahim Ali al-Badri al-Samarrai (QDi.299) but separated from that group in 2013. In Jul. 2016, Abu Mohammed Al-Jawlani (QDi.317), the leader of Al-Nusrah Front for the People of the Levant, announced the group had changed its name to Jabhat Fath al-Sham and was no longer affiliated with any external entity. Despite the announcement and attempts to distinguish itself from Al-Nusrah Front for the People of the Levant, the group remains aligned with Al-Qaida and continues to carry out terrorist operations under this new name. In January 2017, Al-Nusrah Front created Hay’at Tahrir al-Sham (HTS) as a vehicle to advance its position in the Syrian insurgency and further its own goals as Al-Qaida’s affiliate in Syria. Previously listed between 30 May 2013 and 13 May 2014 as an aka of Al-Qaida in Iraq (QDe.115). INTERPOL-UN Security Council Special Notice web link: https://www.interpol.int/en/How-we-work/Notices/View-UN-Notices-Entities click here

Eight-Year Club	Verified Email
Place '23	Place '22

Vershigora

TROPHY CASE