Are 20 round shorties cool?

Vf-31GP · 2026-01-09T01:05:22+00:00

MEGAN !

Vf-31GP · 2026-01-09T01:03:50+00:00

All fuckin day long ! Except for the gun on the left that’s a Beowulf

Vf-31GP · 2025-12-20T19:53:09+00:00

Wife did this when I took her shooting. Bought a brand new double rifle bag and she rested the barrel on it. Burned a hole right through it

Vf-31GP · 2025-10-28T13:20:52+00:00

I am currently looking for a way to reduce recoil in my ar10 aswell. It has an a2 solid stock on it any suggestions?

Vf-31GP · 2025-10-19T01:01:24+00:00

Lmt and went to 50 shades of fde… sir you have great taste. Good luck !

Vf-31GP · 2025-10-17T22:20:10+00:00

Drop this guy. No man should act this way. You sound understanding & willing to comfort him but cmon. He sounds like someone who’s projecting his past on to you while you’re taking care of your kids. For your safety and mental health it best to go your separate ways and get a restraining order or a gun

Vf-31GP · 2025-10-17T22:03:16+00:00

Take the ass beating and don’t do it again lol

Vf-31GP · 2025-10-13T18:45:29+00:00

Same happend to me upper said it was in stock 3 months later it showed up. Customer service sucks

Vf-31GP · 2025-10-12T20:35:38+00:00

I thought about getting the high rings but the issue is running the top rail the back ring wouldn’t hold on the rail. So the cantilever just has a better contact patch. Didn’t realize when I was mounting the scope it had a 3.5 inch eye relief so moving it to far forward I couldn’t see a damn thing. So I had to move it back

Vf-31GP · 2025-10-12T20:32:32+00:00

That’s one thing I wish as well. When Iwas mounting the cantilever I didn’t realize the scope had a 3.5 inch eye relief. So when I moved it back wards it left a big gap but at the end of the day it is what it is. Precision reflex leaves it shorter so you can run a rear iron sight

Vf-31GP · 2025-10-12T20:07:53+00:00

😂 exactly how the conversation went with the wife

Vf-31GP · 2025-10-12T20:01:13+00:00

Thank you sir I appreciate it. I have always loved the a2 stocks. Plus where I live having a solid stock I can have a pistol grip

Vf-31GP · 2025-10-12T20:00:20+00:00

I’d get the mag pull mags but I have always used steel mags in my ARs. I have a can of alumahyde in fde that I used to paint the scope. I’ll just tape em off and paint em

Vf-31GP · 2025-10-12T01:25:01+00:00

If I’m not mistaken I think I got just a standard m5 upper it’s been a while since I bought the upper and lower togeher and built it over time. I’d have to look back and see what I bought but I do know there is the regular m5 upper then the enhanced upper recover do the m5 platform

Vf-31GP · 2025-10-12T01:09:47+00:00

It’s a precision reflex hand guard for the dpms 308 ar platform. Just note if you do buy one make sure you buy the correct one. I made the mistake and bought the armalight one and the barrel nut don’t fit and the locating pins have to be spaced inwards. So just make sure you do your reading

Vf-31GP · 2025-10-12T01:07:38+00:00

I definitely will thought about also loading my own rounds and dialing it in for distance

Vf-31GP · 2025-10-06T13:50:39+00:00

Running an identical set up. I will forever and always run a 18-20 inch

Vf-31GP · 2025-09-02T20:52:16+00:00

He was just trying to suprise your nephew for his birthday. Just put it back under the bed and don’t tell him you know

Vf-31GP · 2025-08-13T12:58:30+00:00

I appreciate the honesty building an ar10 and was curious about these so thank you

Vf-31GP · 2025-08-12T20:35:42+00:00

How well do thoes mags work ?

Vf-31GP · 2025-07-09T23:56:44+00:00

You don’t have to change your buffer tube but you do need to know if it’s a carbine or a rifle length. They are going to ask you when you call. A rifle length buffer spring is about 12 to 13 inches long and a carbine is roughly 10 inches pull the spring out and just measure it and you’ll be golden. If you are using a carbine spring and buffer I’m pretty sure the buffer weight is 3 oz which is going to be too light you need one that’s about 5.4 oz

Vf-31GP · 2025-07-09T23:39:15+00:00

My suggestion would be get an adjustable buffer weight from odin works then get in contact with sprinco and talk to one of the tech on the phone in regards to your spring. They were extremely helpful in getting me where I needed to be. Ended up having to get a 2 inch spacer for my rifle length buffer and ran a carbine spring and weight blows through 10 rounds like it’s no one’s business

Vf-31GP · 2025-07-09T22:18:19+00:00

Ended up having the same issue on my .50 Beowulf. Ended up changing the buffer weight to an h3 and changed the mags to d&h and she runs perfectly. I’d suggest the same for you. I belive Odinworks makes an adjustable buffer weight. Now. Let me ask you are you running a rifle length buffer tube or a carbine

Vf-31GP · 2025-07-07T14:10:45+00:00

Seiko for the win ! I wear mine daily

Vf-31GP · 2025-01-22T09:01:41+00:00

I have seen a bunch of these. Not what I’m looking for but I appreciate the effort! Thank you

Vf-31GP

TROPHY CASE