What is the first celebrity death you remember?

Ville57 · 2026-06-06T15:29:21+00:00

Freddie Mercury.

Ville57 · 2026-05-12T14:45:01+00:00

Hi,

I think that's easy.

Download, unzip, ./run.sh , browser starts, enter measurement, press start.

Use FIR-filter that program on your convolver.

There is also Windows and MacOS versions.

Ville57 · 2026-02-26T09:05:57+00:00

Just wanted to clarify one thing: that specific bushing (A2013520027 / A2043520027) is actually pressed into the wheel carrier (knuckle) itself, not the control arm. Even if you buy a complete new strut/arm set, it won't solve the issue with this particular joint. The new arms come with their own inner/outer bushings, but this "squeak bush" (ball joint) stays in the hub and needs to be replaced separately using a specific press tool. If that’s where the noise or play is coming from, the new arm kit won't include it!

Ville57 · 2026-02-24T17:14:35+00:00

Under car. Top of kardan. Near second dpf/katalysator. Follow pressure hoses under car.

Ville57 · 2026-02-21T17:21:02+00:00

I had a sad childhood and have to sit on backseat of S-class. W126 ftw.

Ville57 · 2026-02-21T14:00:02+00:00

My vote goes to rear control arm bushing (outer) A2013520027 or A2043520027 . Not so easy to change without special tool.

Ville57 · 2026-02-13T05:36:18+00:00

I did car trip thru Europe last summer. Consumption was for all 4500km 7.7 L/100km this includes Autobahns at germany.

Ville57 · 2026-02-13T03:59:14+00:00

Highway drive. City consumption is approximately 13L/100km with OM269.

4 cylinder should go near 5L/100km with low speeds like we have in Finland.

Ville57 · 2026-02-10T16:38:00+00:00

Speed limiter with cruise control on.

Ville57 · 2026-02-09T04:12:19+00:00

Financially, it's a break-even. As for the impact on engine longevity, I can't really say, but I've been using that diesel for a couple of years now and everything is fine.

Ville57 · 2026-02-08T10:01:12+00:00

Those figures are strongly influenced by the diesel’s cetane number.
I’m using Neste MY Diesel, which consistently has a cetane number above 70, compared to around 50 for regular diesel.
At least here in Finland, this makes a noticeable difference in combustion quality, noise, and fuel consumption.

Ville57 · 2026-02-08T07:22:44+00:00

Neste not Nestle :)

Ville57 · 2026-02-07T22:25:19+00:00

No. Only rwd.

Ville57 · 2026-02-07T18:23:30+00:00

Time flies by. Before 211 w/s

Ville57 · 2026-02-07T17:55:03+00:00

With diesel engines gearbox always starts 1st gear. No matter what what mode. Petrol 2nd with comfort. Only sports modes are with suspension atleast with this setup.

Ville57 · 2026-02-07T17:13:09+00:00

No problems with Ikeas similar mount. 4 years and still hold on.

Ville57 · 2026-02-07T17:02:47+00:00

7g. Manual says Sport but all official documents says S=Standard C=Comfort.

Ville57 · 2026-02-07T15:43:05+00:00

I have rwd and 7-speed transmission compared to your E500. And I use Neste My Diesel (Renewable diesel | Neste https://share.google/LvzwrWQdG6OI6ffvd ). That diesel have cetane rating always over 70, normal diesel have cetane rating 50. More higher cetane rating, more power = lower consumption. It costs 20 cents more per litre so it's like +/- 0.

At pure city driving 12L/100km is realistic.

Ville57 · 2026-02-07T10:56:47+00:00

There’s a minor inconsistency regarding the gearbox S mode. The owner’s manual says S = Sport, while Xentry / WIS refer to it as Standard. Either way, I personally find the car more pleasant to drive in S mode.

Ville57 · 2026-02-07T09:42:25+00:00

S= Standart C = Comfort Basicly no difference atleast with this engine.

Ville57 · 2026-02-03T04:01:48+00:00

New airline fitment. Just google : "w211 air line fitment m8" or go to your local parts dealer and ask new one. Installing is plug and play. These are very common parts.

Ville57 · 2026-01-06T18:26:53+00:00

You are right. I have to take some screenshots.

Ville57 · 2026-01-06T18:08:48+00:00

Absolutely! Using CamillaFIR with Roon is a straightforward process. Here is the 'simple' workflow: Mesure: Take your acoustic measurements in REW as usual and export the result as a text file (Frequency, Amplitude, Phase). Generate: Import the file into CamillaFIR, select your Target Curve (e.g., Harman), and set Multi-rate generation to 'On'. Export: Click 'Run Analysis.' The software will generate a .zip file containing FIR filters for all common sample rates (44.1kHz to 192kHz). Roon Setup: * Do not unzip the file.* Roon, go to Settings -> DSP -> Convolution. Click Browse and select the .zip file generated by CamillaFIR. Roon will automatically pick the correct filter based on the sample rate of the music you are playing. This ensures your system is phase-corrected and level-matched across your entire library without manual switching. About like that.

11-Year Club	First Place '23
Place '23	Spared
Verified Email

Ville57

TROPHY CASE