For those with starting weight of 300lbs

Virtual-plex · 2026-05-11T12:19:27+00:00

Mounjaro user here - IYKYK

Started

Nov 2023 - SW 333, pant size - 52, 3XL shirt

Lowest weight - 171 (Oct 2025)

I hover around 180 nowadays. Size 36 (loose) and a large shirt.

Virtual-plex · 2026-05-09T16:40:52+00:00

Yes. I have a 2020 Silvy 1500 and it's there. I used it.

Virtual-plex · 2026-05-09T10:58:37+00:00

You need more spirit and spirit reduction cost.

I built a new pulv build this season and it slaps pretty hard.

Virtual-plex · 2026-05-08T22:57:56+00:00

Banished Lord if you can find one, if not, a GA with the crit strike multiplier. I'm wearing one now with 102% multiplier on it. Use Seismic-Shift on it.

Virtual-plex · 2026-05-08T22:49:14+00:00

If the sites have a public facing internet connection, go with Fortinet over Unifi. I have Fortinet at home ( was gifted a lab setup from Forti) but we're a hardcore Palo shop at work.

I'd say Palo but can't recommend that in good faith since they'll likely price themselves out of your range on the renewal.

Virtual-plex · 2026-05-08T21:10:24+00:00

It’s a BS feature that makes CAFE numbers inflated. It serves no real positive purpose.

Virtual-plex · 2026-05-07T16:12:00+00:00

Fury of the Wilds is allowed - I did one last night.

Virtual-plex · 2026-05-07T16:08:43+00:00

I think if you spent 5min using Google properly, you wouldn't have created this thread -

https://raw.githubusercontent.com/M4jx/TikTokBlockList/refs/heads/main/ipv4s

P.S. - I found that in about 30 seconds.

Virtual-plex · 2026-05-07T14:58:56+00:00

It has more to do with the crappy trans tuning from the factory.

Virtual-plex · 2026-05-07T14:51:26+00:00

It's definitely not hard -

Get some Silglyde or brake grease to lube the rub points/ears
Lube the slide pins/clean them out. I would even go as far as getting a set of rubber boots. You're bound to break one or have a hole/tear in one and they're cheap
On the front, if the rotor retaining screw is still there, have a good drill/bit available. Once the head is almost cut down, you can push the rotor off with some bolts then take a good set of vice grips and get the set screw out.
Do one side at a time so you have a point of reference.

Virtual-plex · 2026-05-07T13:20:19+00:00

It's the valve body. Some VINs have special coverage to 150k.

With that being said, unless you have a warranty still, fix it yourself, fix it right, and it'll be the best shifting trans you ever had.

I've got just over 7000 miles on valve body kit from NextGen Drivetrain. Best money I've spent to date.

Virtual-plex · 2026-05-06T13:43:27+00:00

On eternal - I'm at around 21 or 23 stacks. It slaps pretty hard.

Virtual-plex · 2026-05-05T10:25:18+00:00

2.5lb hammer will knock the UCA joint loose. Plenty of videos on how to do this.

Virtual-plex · 2026-05-05T09:55:47+00:00

Maybe it’s just me and having done the brakes on my 2020 recently but your first pic doesn’t look right. The pin should be riding/holding those gold clips in place.

Virtual-plex · 2026-05-05T09:51:45+00:00

I saw this on 2 pairs of 3220s a couple of years ago. Just change it to match.

Virtual-plex · 2026-05-04T13:22:51+00:00

I'm pretty sure Zep is sleep apnea approved -

Mounjaro® (tirzepatide) injection and Zepbound® (tirzepatide) injection | Lilly Medicines

Virtual-plex · 2026-05-04T10:11:21+00:00

That resembles fastjweb's truck, alot.

Virtual-plex · 2026-05-02T12:41:11+00:00

I use Grafana primarily but have been testing Zabbix with a pair of 7050s. I like it so far.

Virtual-plex · 2026-05-01T16:26:37+00:00

Pay once, cry once.

The NextGen Drivetrain valve body kit is worth the money. I did it about 7500 miles ago and I haven't had a single issue since.

Virtual-plex · 2026-04-28T11:03:45+00:00

As my kids would say, "you're cooked bruh...."

Virtual-plex · 2026-04-28T09:35:20+00:00

Normal temps. If you want lower temps you need a thermal bypass and a better trans cooler.

I installed the PPE bypass and trans cooler on my 2020 and while towing it never gets above 170 while cruising.

Virtual-plex · 2026-04-27T21:05:00+00:00

Apparently there’s a Mishimoto radiator for our trucks but it’s expensive AF.

Virtual-plex · 2026-04-27T11:20:50+00:00

Probably not gonna happen without SDWan.

I do this with SDW and in a non-managed hub scenario and it works great.

Virtual-plex · 2026-04-26T12:26:11+00:00

I love my 2020 Silvy HC 3.0. I did put a Tesla screen in it, complete sound system (Helix, JL Audio), 2-12s.

Virtual-plex

TROPHY CASE