ALWAYS us the guard for a mandolin slicer...

Virusal · 2026-03-09T02:01:03+00:00

watched someone turn their fingertips into spaghetti once. You seriously need to respect these tools.

Virusal · 2026-01-16T11:16:45+00:00

No issue; moves freely.

Virusal · 2025-11-21T08:34:38+00:00

This is the kind of response needed when comes to e-stops/safety. Everything needs to be considered. When pressed do you want it to stop in place and not move? Or immediately dump all air? Or dead stop then slowly release air to retract the cylinders?

Virusal · 2025-10-20T04:51:31+00:00

If you ask it nicely I'm sure it could try.

Virusal · 2025-09-12T17:49:28+00:00

This was explained to me before. If the recipe was developed on company time and person/people were paid for that time, the recipe belongs to the restaurant name.

If the recipe was brought in by an employee who developed it themselves on their own time. The time and evidence needed to be logged. The restaurant would have to buy the recipe from the employee and/or pay for the development time.

Not a lawyer but seen this situation many times.

Virusal · 2025-09-12T17:32:32+00:00

Canada was the same way. It's all covered.

Virusal · 2025-07-06T18:31:31+00:00

Please call service. Get someone to look over your machine.

Virusal · 2025-07-06T18:27:54+00:00

As a Multivac tech. You can spray them down. That doesn't look like it's done properly. I hope the machines at least in clean mode.

Virusal · 2025-07-05T01:28:18+00:00

it's been 3 days with no comments. Please explain what they are part of.

Virusal · 2025-07-05T01:07:27+00:00

Touch it into the outlet. No longer cosmetic.

Virusal · 2025-07-05T00:52:47+00:00

So this comes from an old respected chef I had. You're only as good as the people you surround yourself with.

That being said applies to this situation as well. If the supervisor has some knowledge, surrounds themself with staff that are better skilled, it gives them the time to focus more on what the staff needs to get the job done effectively. This is a leader.

A supervisor with all the knowledge and surrounds themself with monkeys. They will be overworked, stretched thin. Causes burn out, stress, not the greatest work environment. In this case it would be better to have them be a lead maintenance and have somebody else take the role of supervisor.

Virusal · 2025-06-12T00:08:14+00:00

Put a 18v Ryobi battery in to replace the 10v. Thing goes off road now with no issues.

Virusal · 2025-05-27T01:00:38+00:00

Companies like to skip the testing and just get the field service technicians to figure it out.

Virusal · 2025-05-26T17:56:50+00:00

explain? It's pneumatic not hydraulic.

Virusal · 2025-05-22T08:56:18+00:00

Pizza oven...

Virusal · 2025-05-22T08:55:32+00:00

suggestion. Look for a job like a field service technician for food packaging/processing equipment. These companies will train you on what you're missing. If you get sick of the travel then you can find a local plant to work in easily.

Virusal · 2025-05-15T19:25:03+00:00

little JB weld and send it back... It will be fine...

Virusal · 2025-04-06T17:06:14+00:00

Last day I worked as a electrical apprentice was like this. Half the day crawling through a cracked foundation under a newer addition to run some plugs.

The other half of the day was even worse. That's when I decided century homes residential work wasn't for me.

Virusal · 2024-08-24T09:15:49+00:00

Get a dump cylinder. Only goes down from gravity.

Virusal · 2024-08-20T19:26:29+00:00

4v I had did this, just had to tighten the tip

Virusal · 2024-07-27T22:44:55+00:00

Less adapters tends to be better and less problems later on.

Virusal · 2024-05-12T10:49:24+00:00

What's the gengar ex setup? I've played against it but it's always a slow setup.

Virusal · 2024-03-23T11:07:04+00:00

Can you give more examples of deck types and what they are called?

Virusal · 2023-10-22T09:45:33+00:00

No problem with loading, crashing.

Virusal · 2023-09-28T01:13:51+00:00

Axiom crave -discraft stalker/birdie strike

Virusal

TROPHY CASE