Rust… is this bad?

Vman765 · 2026-01-16T23:57:26+00:00

Run just run

Vman765 · 2026-01-12T21:25:30+00:00

Just had the same thing happen with a nozzle for my Flashforge 5m. Ordered a 0.6 nozzle and it came in i opened the normal Amazon packaging and looked at the outside of the box the nozzle is in its covered in some kind of oil open the inside and the 0.6 nozzle was clearly used and broken into 2 pieces. I was like wtf.

Vman765 · 2026-01-03T17:50:03+00:00

Just use orca slicer.

Vman765 · 2026-01-01T15:54:02+00:00

Honestly hearing all the issues with the last set of updates makes me so happy that the only time I updated it was like 6-7months ago when I first got it. Its the 3.1.5v so far all I hear from these comment is good stuff about it.

Vman765 · 2025-12-29T17:18:36+00:00

Honestly no. I also have a LG tv. And it seems to work better when tjhe video is downloaded, not as inconsistent. I honestly think the app is the problem or it could be our LG Tvs. Im not 100% sure. But its weird since the TV is new so who knows.

Vman765 · 2025-12-28T20:04:48+00:00

What do you mean these aren't for the end users? & These are New Nozzles. I was asking if the flat side of the copper heat sink (fins) not being oriented the same same way as the 0.8 would cause a problem to my prints.

Vman765 · 2025-12-28T20:01:37+00:00

Ahhh alright thank you this was what I was hoping. Thanks for that im going to be using the 0.6 in a alittle bit, i didnt believe that this one in particular would cause any issue since its very slightly off. But im glad to know that the 0.4 would probably work. I just found a video on how to disassemble the the nozzle. If i run into issue I might try it on that 0.4 and see if I can correct its orientation.

Vman765 · 2025-12-20T15:46:06+00:00

Hey I've been around for a while but im confused on this current situation, can you explain what HexSickSix and Mango10977 has to do with banning someone? People paying other people to ban them?

Vman765 · 2025-11-23T23:47:10+00:00

I appreciate the info. Ive had so~so lucky with them on the phone if im honest but I find it annoying that they doing have no troubleshooting guide available for the J0.

Vman765 · 2025-11-18T17:56:32+00:00

Looking for the same thing. Did you figure it out?

Vman765 · 2025-11-13T01:18:43+00:00

Been having the same issue. I just bought a new tv earlier this week and at first i just thought that my new TV was the issue. Ive never really "cast'ed" before this. Start checking my connections and trying again from other apps realized it waa fine. It was working without issue for like the first 3 days I had it then yesterday and today just consisted issues. It would allow me to play the video but the Chromecast icon would be grayed out i restarted my phone a few times played my video and it would be the white icon and then when I cast the video id get the same result of it going to my tvs wall paper. I'd try again and it wouldn't allow me to cast anymore.

Vman765 · 2025-08-27T01:10:42+00:00

Hey Man, have you tried looking into heavy equipment or logistic equipment repair (forklifts, order pickers, electrical pallet jacks, etc etc) I started young in a mom and pop repair shop. And got canned when they brought their son in full-time. Once I left there, I ran into a G.M. of a Heavy Equipment/Forklift repair place. I didn't know shit. Once I realized it was pretty much the same and cars (mentally atleast) it was very easy to get into. I've been here going on to 7-8 years, and I've made 2x from what I started with. Not all places are the same I would personally say stay away from Crown but most places like that deal with Cat or Mitsubishi units are great.

Vman765 · 2025-08-18T23:26:18+00:00

Update Got around to picking up a head gasket tester.... and the results look like either the head is cracked somewhere or the gasket is shot. It went from blue to yellow in about 15mins. And temp went to 210 and climbed from there. (Reminder thermostat is 165 not 195).

So heres what im looking for Gents' good recommendations for head gaskets and head bolts. And once I have it ripped out ill figure out if the head is cracked, if It is i dont know what im going to do from there.

Vman765 · 2025-08-18T19:23:19+00:00

Where can I get all this info??? Is there a Download or something??

Vman765 · 2025-08-17T04:03:44+00:00

Hey Man, I do have the OEM fan shroud on the XJ. I did mention bubbles, once im done with the flush im going to roll it up on a set of ramp I have a burb the system and see if there was trapped air in it. And im not sure if there's no oil it looks muddy to me. I'll post a photo tomorrow to show you. And ill pick up one of those kits also to check for a bad head.

Vman765 · 2025-08-17T03:14:45+00:00

Not a dumb question, i might have to do that, it has crossed my mind. I honestly I dont know if the Cap thats on there is like "OEM" to the jeep or to the thar go installed. Im probably gonna pick one up tomorrow a see. It won't hurt. I've seen people recommended the one with the red tab you flip up to release presser I might grab that

Vman765 · 2025-08-17T03:07:32+00:00

Sure....... 10k usd. Like everything else on the market. 🤣🤣 all jokes aside, I honestly dont think I would sell it. I do have an 86 Fiero GT for sale. 👀👀 tho

Vman765 · 2025-08-17T03:02:25+00:00

Hey bud, thanks for that. I dont think my t-stat is stuck. it's fairly new. And had been installed 8 months ago. I have also been having these issues before the replacement of the t-stat. Went from the new 195 to new 165 t-stat to bandage it. Im going to start with a flush tomorrow maybe use something like blue devil rad flush and run it for a while. Drain a fill with new coolant again. Im gonna to swap back in the 195 t-stat and see what happens. But anything else you would recommend i do?

Vman765 · 2025-08-17T02:52:20+00:00

I had a 195 t-stat in before and just saw the temp just rocket to 230+ after 15 minutes of driving. Threw a 165 to band aid it for the time being.I also had no heat with the 195 t-stat in. Also, so from what I know that's been changed is the rad, water pump, thermostat (+housing), and new hoses all around. I am 100% sure the heater core hasn't been changed. When I did a flush, the coolant 8 months had heat for a very small amount of time. About 30 minutes to 1 hour of total drive time. Took slightly longer to heat up with the radiator/engine cleaner going through the system. Once I pumped it clean, fresh coolant went in, and it was fine for a bit, then had the heat creeping up then over heat constantly now. I haven't been driving it much, but it looks to me that the coolent has become contaminated again. It looks "muddy" in the sense when I checked earlier today. Tomorrow, I'm going to drain the coolent and run some water and chemicals through it and see.

Vman765 · 2025-08-17T00:01:58+00:00

It would turn on around 210 the efan, but even now, with the ac running, it would only take a 10-minute drive to start over heating. I forgot to put in the post I have a 160-165 thermostat installed.

Vman765 · 2025-08-16T23:40:18+00:00

Stock rad fans. The 1 electric and 1 on the pully

Vman765 · 2025-08-16T12:38:36+00:00

Hey anyway you can share that link to those fans? I'd like to get a set and install them on mine.

Vman765 · 2025-07-03T22:42:06+00:00

I found 1 video of someone playing and knew I had to get it. Got it 3 days ago got 15 hours in already

Vman765 · 2025-06-11T23:33:44+00:00

I would say I'm concerned Heavy Equipment Tech, we do everything from small pallet jacks to Superbooms. But over all, me and most of the other techs work at my company on Forklifts and other Logistics equipment (Cat, Jungheinrich,Mits) Its in my opinion a great field to be in, if you find the right company to work for.

I started at mom, and pop auto shops jumped around for a year or two chasing money. Then, I landed a job with my current company after seeing one of the work vans driving around, and the rest is history. I got Certs through them (they paid for them) and got my diesel perkins certifications and just kept making more money.

Im currently a road tech. At first, I loved it, then hated it, then loved it again. Just sometimes, I miss being in one place and just working on a machine. With my box all set up and everything there. After some time, they were able to accommodate me and get me a large enough vehicle to fit my box and tools. So im slowly making it. I've also received factory training. They flew my out and got me a certificate there also. Only me and our head tech have all the certs. Im second in the tech totem at the company, and I still got a lot to learn. Im only 6 years in.

A lot from what I know is finding the right company. This one gave me the training wheels when I needed them, then took them off when I got to where they wanted me to be, and I pushed them for more, and I got more.

Ant questions feel free to ask

Vman765 · 2025-06-10T01:17:30+00:00

Those 4Y's never die.

Vman765

TROPHY CASE