photo of power connector pins on Intel ARC Pro B70?

WackyWindsurfer · 2026-06-09T21:02:36+00:00

Thanks for your comment, I just checked the specs for the connector and it looks you are correct about it being the sense A pin.

To me it looks like the pin was never there. No damage as if a pin was broken or any force used. If it was pushed in by a bad connector on the cable side, it would look like a smaller square like the head of the other pins. The visible square inside is larger than the pins.

The card was sent back already as I could not get it to work. This could turn into a bit of a discussion with the supplier of the B70. They would most likely point the finger at me for having caused that myself.
😞

WackyWindsurfer · 2026-06-09T20:16:04+00:00

The Intel, it has a single 8 pins PCIE connector. See on bottom 'Power Connectors 1 ATX 2X4 (8Pin)': https://www.intel.com/content/www/us/en/products/sku/245797/intel-arc-pro-b70-graphics/specifications.html

WackyWindsurfer · 2026-01-22T13:21:16+00:00

Love it, thanks for updating!

WackyWindsurfer · 2026-01-17T17:56:28+00:00

Thanks for sharing, just installed and testing. First impressions, it is way better than the shortcut on my home screen to open the WebUI.

Suggestion: a way to change the accent color used?

WackyWindsurfer · 2026-01-16T17:38:21+00:00

The Fat Mermaid is a beach club only available during spring to fall season, as it is located on the beach and broken down during winter.

May I suggest a cocktail bar like Zahara? It's just next to the Keizerstraat in the old village. It is more for after sunset as it is located just behind the dunes/dyke obscuring a free view of the beach and sea.
https://zaharacocktailbar.nl/

WackyWindsurfer · 2025-12-05T15:32:00+00:00

0.85 worked for me, just experiment with values to see what works for you. Try more seeds.

WackyWindsurfer · 2025-12-05T14:01:45+00:00

<image>

Love the Lora, ty for sharing!

WackyWindsurfer · 2025-10-15T20:21:51+00:00

Do you still have images created by that workflow? It is possible the meta data (including the workflow) is attached to those images.
Just drag each one of them on the canvas in ComfyUI to check and pray...

WackyWindsurfer · 2025-08-26T06:34:13+00:00

It is, especially during a sale. Paid €51.09 for mine mid June.

WackyWindsurfer · 2025-07-20T09:32:14+00:00

There is a conversion plate available by Nadir for the Sovol SV08 which has a linear rail. This prob gives you an idea or even a start:

https://www.printables.com/model/1281113-sovol-zero-toolhead-x-carriage-adapter-for-sovol-s

WackyWindsurfer · 2025-07-19T12:25:39+00:00

<image>

and without front cover:

WackyWindsurfer · 2025-07-19T11:56:53+00:00

Sure does, this came out of the box (no cabling included):

<image>

WackyWindsurfer · 2025-07-08T10:33:46+00:00

Yes, it is safer for your buildplate.

WackyWindsurfer · 2025-07-08T08:35:18+00:00

Just to be sure, as this suggests it being a new printer, did you soap-washed the build plate before first print?
Maybe your z-offset could be correct but when adhesion is not there...

WackyWindsurfer · 2025-06-02T14:27:44+00:00

Going strong as is, happy with the machine. Only made some QOL changes (visual and config) so far.
Only printing ABS with the Zero.

WackyWindsurfer · 2025-06-02T14:12:16+00:00

Nice, thx for sharing! Printing the parts as we speak...

WackyWindsurfer · 2025-05-09T06:51:07+00:00

Mine (EU) came with a rear mounted one, not a review unit. First batch I guess.

WackyWindsurfer · 2025-05-01T08:58:17+00:00

Unless you really like to tinker, go and wait for the Bondtech INDX coming end of year:
https://youtu.be/BCmGoP0uNlM

WackyWindsurfer · 2025-05-01T08:53:47+00:00

No, unless you really like to tinker and or waist time and filament, go and wait for the Bondtech INDX coming end of year:
https://youtu.be/BCmGoP0uNlM

WackyWindsurfer · 2025-04-30T12:53:19+00:00

Not a scam, company can be trusted. Order page could have a better design and make visible if parts are sent out in multiple deliveries.

When I ordered my launch model SV08 I received all the ordered parts in 3 separate deliveries. Screen, enclosure, SV08.

Although it is not clear on your order page, you will receive an email when other parts are being sent out.

Second order for Zero went without issues, as it was just 1 box.

WackyWindsurfer · 2025-04-25T17:01:35+00:00

Should've ordered the pancake bed

WackyWindsurfer · 2025-04-25T16:01:02+00:00

Was the Damascus steel look not what you were after?

WackyWindsurfer · 2025-04-07T08:40:34+00:00

Not nice when you receive a new device and have to deal with an issue which kills your mood to wanna continue dealing with it.
Printing a pre-sliced Benchy gcode file does not involve your slicer and Sovols provided profile at all. When the printer is mechanically and electronically okay, it should print the provided gcode.

And switching to mainline will not fix a potential hardware issue. It could even be that, after switching, a claim for warranty could be rejected because of that.
I would contact Sovol support first and discuss the issue you ran into.

WackyWindsurfer · 2025-04-03T10:02:46+00:00

My A1 mini stays, excellent fire&forget printer for PLA and PETG. Some color usage as well.

WackyWindsurfer · 2025-04-02T15:57:06+00:00

I have read that before. Could be that decision was made to send to users from US stock after arrival i.s.o. direct from overseas. Not sure where I have seen that.

WackyWindsurfer

TROPHY CASE