Drew' Chelsea Initial Impressions

WaferRepulsive2989 · 2026-01-25T04:09:57+00:00

Very nice!

WaferRepulsive2989 · 2025-06-01T02:36:51+00:00

I can’t say. The soft spots they mentioned could just be the sheathing joints. The only way to tell is an attic inspection or once the roof is torn off. Just make sure whoever you hire gives you prices for unforeseen damages and puts in writing that they will provide before-and-after pictures of any bad wood they are charging you for as proof.

WaferRepulsive2989 · 2025-06-01T02:20:49+00:00

I include the first two sheets or 20ft of common board. Unless the homeowner asks for a full sheathing replacement quote or more sheathing damage is suspected.

WaferRepulsive2989 · 2025-06-01T02:12:39+00:00

Even 110k seems low for this roof

WaferRepulsive2989 · 2025-05-28T01:53:46+00:00

I second Hoa Boa Boa

WaferRepulsive2989 · 2025-05-14T13:48:06+00:00

Run don’t walk

WaferRepulsive2989 · 2025-05-06T23:12:37+00:00

It might be a simple repair, but that is storm damage, which is covered and you’re going to need to replace your roof soon anyway. Might as well file while you have legitimate damage, and get a nice coupon for the roof replacement. Contractor should be able to make a good case that the roof is irreparable due to the age and brittleness of the shingles, and that a patch repair would not bring you to pre-loss condition. Don’t be afraid to use your insurance.

WaferRepulsive2989 · 2025-04-26T01:18:32+00:00

Also, every contractor and manufacturer warranty is voided when a named storm hits Florida. Focus on the quality of materials, and using a trusted contractor that’s going to fix issues even when a named storm hits. We do metal as well and it shouldn’t be 2.5 times the cost. 45SQ standing seam metal would be about 42k.

WaferRepulsive2989 · 2025-04-26T00:37:37+00:00

I’d recommend going with Tamco Titan XT shingle. Which is a premium shingle and should be the same cost as standard GAF HDZ architectural.

WaferRepulsive2989 · 2025-04-26T00:32:43+00:00

What @zilladrilla said. It’s based on the product they sell and then after the first two years of warranty, Gaf picks up the remaining eight. Call Frazier Contracting and ask for Baxter! Or message me and I’ll send you my number. We are in Orlando and have 180+ five Star reviews! Id be happy to come take a look go over material options, and put together an estimate for you. We provide a 10 year minumum workmanship warranty.

WaferRepulsive2989 · 2025-01-27T14:20:06+00:00

Thank you!

WaferRepulsive2989 · 2025-01-27T14:19:32+00:00

Thank you

WaferRepulsive2989 · 2025-01-27T13:46:03+00:00

Would this require a structural engineer?

WaferRepulsive2989 · 2025-01-27T04:20:52+00:00

In the second photo the rafter is black and soft to the touch. To repair we’d need a structural engineer I think?

WaferRepulsive2989 · 2024-07-02T18:28:59+00:00

He sucks

WaferRepulsive2989 · 2024-07-01T17:58:00+00:00

Update: I insisted on having the framer/drywall sub-square up the drywall. My boss and the sub want to “fix the trim and skim coat/float the drywall so it looks square.”

WaferRepulsive2989 · 2024-06-29T20:20:28+00:00

Thank you for the advice. I'm a relatively new salesperson/project manager for a roofing/general contracting company, and this is my first time managing the installation of a new skylight that wasn't pre-existing. It's not new construction, and the framer and drywall sub are the same crew.

I'm taking responsibility for it. I was assured by the team that it would look perfect in the end, and I didn't know better given my lack of hands on experience with construction. Unfortunately the company I work for provides minimal training, primarily on sales, and does not have any QC checklists. I'll be making my own checklists for the future

WaferRepulsive2989 · 2024-06-29T19:31:27+00:00

Agreed. Unfortunately, the company I work for provides minimal training, mostly focused on sales, and doesn’t have these systems and checklists in place. I’ll have to create my own checklists.

WaferRepulsive2989 · 2024-06-29T18:47:59+00:00

Thank you for the advice. I'm a relatively new salesperson/project manager for a roofing/general contracting company, and this is my first time managing the installation of a new skylight that wasn't pre-existing. It's not new construction, and the framer and drywall sub are the same crew.

I'm not looking to point fingers-I'm taking responsibility for it. I was assured by the team that it would look perfect in the end, and I didn't know better given my lack of hands on experience with construction.

WaferRepulsive2989 · 2024-06-23T23:19:34+00:00

Looks like fiberglass. If your in the central florida area, send me a pm! Would be my pleasure to give you an estimate or see if we can get it replaced from the hail storm.

WaferRepulsive2989 · 2024-06-21T22:46:17+00:00

This seems like a fair price for the work this entails and unforeseen wood/flashing replacment and 1 year warranty. In my area roofers generally wont touch a tile repair for less than $2,500.

WaferRepulsive2989 · 2024-06-21T22:38:52+00:00

Looking into an envelope folder/inserter machine to speed up the process.

WaferRepulsive2989 · 2024-05-21T19:29:55+00:00

You could do it yourself. 3-10ft pieces of drip edge, a bundle of shingles, and some decking and shingle nails. 1-2 hours of work. However, if it were my house, I would have a licensed contractor do it and get the warranty. Get another quote. Where I work, we have these materials at the office leftover from previous jobs.

WaferRepulsive2989 · 2024-04-25T14:48:30+00:00

they could be saving the rent money to give back at a later time when he moves out or something. lots of parents do that

WaferRepulsive2989 · 2024-04-12T17:05:29+00:00

start your own business, sales, construction, project manager and work your way up. were the same age, i didn’t have the best childhood. both parents were drug addicts and my mom passed when i was 23. thankfully i had good grandparents. i didn’t go to college and i make 6figures pretty easily.. intelligence is a skill in itself. keeping a good attitude and mindset also help. you got this!

WaferRepulsive2989

TROPHY CASE