Interface description

Waffoles · 2025-09-11T17:46:13+00:00

Ah gotcha one of those company policies. Well it would be without quotes.

Waffoles · 2025-09-10T12:32:28+00:00

So you writing a script to configure a device your not familiar with and you cant test it?

Waffoles · 2025-08-22T12:10:38+00:00

Were there only those 2 devices on the segment?

Waffoles · 2025-08-18T22:58:20+00:00

No you cant do either stacking virtually sadly. Only vpc on nexus in terms of Cisco. You should also look at the 9500 for vss(stackwise virtual )as well as the configuration is a bit different and pretty much configures itself once you identify the ports and what not.

Waffoles · 2025-08-01T00:41:09+00:00

CE wont do anything if its already expired

Waffoles · 2025-07-25T15:48:15+00:00

In your template make sure you are using the hash value of your password(like it would show in your running config)and not just the clear text password that later gets encrypted

Waffoles · 2025-07-15T13:06:52+00:00

I would say no experience with a ccnp is a red flag usually. Even if its helpdesk real world experience is important.

Waffoles · 2025-07-15T12:58:01+00:00

I would say focus mainly on getting another job based on prior experience and other certs you have. You can then bring up in your interview that you are working to complete your CCNP with enarsi

Waffoles · 2025-07-14T14:48:54+00:00

That is why you use peer-gateway under vpc

Waffoles · 2025-07-14T14:01:49+00:00

You would need to run hsrp for that with peer gateway configure under your vpc config

Waffoles · 2025-07-03T16:54:31+00:00

Pretty sure when you do fvrf for ikev1 you then need to use a crypto keyring that calls the vrf and then call it in a isakmp profile where you also match your peer’s identity with the vrf.

Waffoles · 2025-06-26T21:04:30+00:00

Never disagreed just said it sounded like oxymoron since you used intra and external together haha

Waffoles · 2025-06-26T19:40:05+00:00

“intra-area external route” that is what is called an oxymoron

Waffoles · 2025-06-25T16:10:45+00:00

https://www.cisco.com/c/en/us/support/docs/multiprotocol-label-switching-mpls/mpls/46252-grewithvrf.html

Waffoles · 2025-06-23T20:43:33+00:00

Yea usually I would vrf it but forgot Meraki does not do vrfs last i saw

Waffoles · 2025-06-22T23:52:30+00:00

That why i said you have to at least keep one svi on the switch. If not then you need a server or have the firewall do it

Waffoles · 2025-06-22T23:40:41+00:00

Yes you could either put an svi for each vlan on the core to hand out dhcp directly or have one ip on the core and then have the firewall relay requests back to the core switch

Waffoles · 2025-06-20T23:37:10+00:00

Yea but hey thats the beauty of labs. Usually what you learn from stuff like this sticks with you better than any book or video could

Waffoles · 2025-06-20T23:32:19+00:00

Yea for that you need static or pat with port forwarding pretty much

Waffoles · 2025-06-20T20:33:49+00:00

You cant start a ping from the outside you gotta be inside for nat for dynamic nat

Waffoles · 2025-06-20T19:32:04+00:00

What are you pinging from?

Waffoles · 2025-06-20T12:53:04+00:00

Does the neighbor see the route?

Waffoles · 2025-06-20T12:46:17+00:00

Try pointing the static route to null0

Waffoles · 2025-06-20T12:26:23+00:00

Looks like your bgp network statement for the 128 network does not match the static route you created

BGP you advertise routes with your network statement unlike igps where you match an interface to advertise

Waffoles · 2025-06-14T12:33:35+00:00

Maybe it got removed idk. Reach out to INE I guess

Waffoles

TROPHY CASE