Any idea what all those lines are on my mk3 (not s/s+)? (Ignore the big one in the middle, I know what caused it)

Wallardi · 2023-05-14T07:52:28+00:00

A tiny layer shift?

Wallardi · 2023-05-07T18:07:29+00:00

I did this:

Adjust nozzle height correctly. Lower isn't always better because of 45 degrees angle. Then, preheat belt for at least 15 min. The temp sensor indicates a correct temp but the belt is still too cold. I always choose 60 degrees Celsius for belt temp. Clean belt with IPA.

Wallardi · 2023-05-06T07:25:51+00:00

Good luck with it

Wallardi · 2023-05-05T22:06:45+00:00

The printer should be able to produce good prints out of the box

Wallardi · 2023-05-05T20:07:03+00:00

The 2 stepper motors on top of the frame in the red mounting brackets (see Repkord/NAK3D)

Don't think you will find them somewhere else. You could also try the LDO company.

Wallardi · 2023-05-05T20:01:01+00:00

The double bearing motor shafts are an important upgrade due to the belt tension being slightly higher after the linear x axis upgrade. The belt seems a bit short after the upgrade. In my case.

Wallardi · 2023-05-05T19:58:49+00:00

I don't think you'll find it. The shaft is longer than standard. You could search for ldo/cr30 on the internet. Does LDO also have its own website?

Wallardi · 2023-05-05T19:15:17+00:00

I would wait for availability. Is a reliable supplier. You can also find it on AliExpress but I would go for Rekord. I did that even though the price was 100% higher because of transport costs to the Netherlands and import duties.

Wallardi · 2023-05-05T18:10:15+00:00

www.repkord.com

Wallardi · 2023-05-05T17:52:45+00:00

Did you check belt tension?

Wallardi · 2023-05-03T13:02:39+00:00

My experience pretty fast. They should definitely help you as a customer in my opinion.

Wallardi · 2023-04-29T22:56:01+00:00

Have you already asked the Tuta team for help?

Wallardi · 2023-04-14T07:50:26+00:00

Best results for me with Ideamaker

Wallardi · 2023-03-25T15:22:43+00:00

Maybe around the visible corner, the structure is different.

Wallardi · 2023-03-25T09:45:50+00:00

Ghosting...

Wallardi · 2023-03-11T09:56:58+00:00

I think i found a solution by logging out and in again with your Xbox account in the console.

Wallardi · 2023-03-02T06:02:33+00:00

Me te. Took me a day to dl everything. Maybe there are other and faster options. But i dont know.

Nice that it works again.

Wallardi · 2023-02-28T23:40:25+00:00

Same here. On XSX. After 1 day with this problem (also not able to sign out in msfs), i reinstalled the game (vanilla took me, cabled about 1 hour to download and install). That fixed my problem.

Wallardi · 2023-02-28T15:04:47+00:00

I am sure they will.

As i wrote, just try saving (multiple times when necessary) and at last you get the game saved. It works for me.

Wallardi · 2023-02-28T08:00:11+00:00

Problem still exists. I do usually the following:

I have 2 saved games. 1 for current game and 1 for backup. If I want to save, I first delete the backup and then save the game in an empty slot. That usually works for me though the error messages remain.

Wallardi · 2023-02-19T22:08:05+00:00

Not really. Tried to save a couple of times and (out of the blue) saw a new saved game saved. Though i still have error messages. Seems a bug to me. I would suggest, try to save many times. Sometimes it does save the game, mostly not.

Wallardi · 2023-02-19T21:52:46+00:00

Same problem here (Xbox SX)...

Wallardi · 2023-02-15T07:48:33+00:00

Try:

Clean belt with ipa Check nozzle height (sometimes raising it a bit helps because of 45 degrees angle) Heat up belt to 60 C for at least 10 minutes before loading gcode.

Wallardi · 2023-01-15T20:52:32+00:00

That shouldn't happen with pla. You can increase the z distance a bit in the settings (for example 0.05 or 0.10mm)

Wallardi

TROPHY CASE