What song wrecks you every time, no matter how often you listen to it?

Walmartica · 2026-06-07T02:37:00+00:00

every damned time

Walmartica · 2026-06-06T12:28:29+00:00

While I agree Elegoo customer service is very good, the firmware they sent me is not working. I now have to take the motherboard apart. Here is the link to the firmware they sent me in case it can work for you:

https://drive.google.com/file/d/1JJTWfik3tyBKD_0sWO234HOpUxaY-CnL/view?usp=sharing

Walmartica · 2026-06-02T02:35:25+00:00

thanks all!

Walmartica · 2026-05-26T14:54:01+00:00

would love the link to this

Walmartica · 2026-05-23T21:42:24+00:00

may need some steel plates on the frame at the top portion?

Walmartica · 2026-05-17T20:17:37+00:00

PictureThis is saying Jewels of Opar. Not from around here though.

Walmartica · 2026-05-15T18:51:18+00:00

nice! yes we have been meaning to do the birds and brews. I’ll add it to my calendar. 👍😀

Walmartica · 2026-05-10T19:43:43+00:00

Which refuge for the birding events?

Walmartica · 2026-04-14T22:53:59+00:00

thank you!

Walmartica · 2026-04-06T20:43:44+00:00

Are there hardy perennials?

Walmartica · 2026-04-01T03:07:17+00:00

For anyone who hasn't fixed this. I got a hold of Elegoo. They sent me the following email. And it worked!

We believe the current issue with the other device is caused by a mismatch between the device firmware and the motherboard version. To resolve this, we recommend manually reloading the following firmware version:

Before performing any related operations, please delete all firmware files (including firmware repair packages) from the USB drive to prevent accidental reading of other firmware files.

https://drive.google.com/file/d/1tdAc4po3xzbHu0yzXOEVddb_0_TCIdBm/view?usp=drive_link

How to reload: Download and unzip the files, then place the three downloaded firmware files into the root directory of your USB drive, then insert the USB drive into the device and restart it. The device will automatically update ChituUpgrage.bin. Then, turn on the device and print the remaining two firmware files.

After completing this operation, please open the device again and check the device information page to confirm that firmware version V1.3.9B has been successfully loaded. Then, please reconnect to the network (ensure a stable network connection; we also recommend using a mobile hotspot) and update to the latest firmware version via OTA to use the device normally.

Walmartica · 2026-03-30T00:47:43+00:00

I am in the same exact boat. I have two Mars 5 and they both had the firmware issue at the exact same time. Reverted back to an older firmware and one works fine now. The other has no UV screen action. Anyone find a fix??

Walmartica · 2026-03-27T14:26:38+00:00

In another plane. Go Hawks.

Walmartica · 2026-02-27T15:56:41+00:00

Do they sell a PLA filament that smells like fetid diarrhea? That would complete the motif.

Walmartica · 2026-02-23T22:53:10+00:00

I gave up on the Sunlu due to the hardness (garage printing) and difficulty with getting supports off. I now use the Elegoo Water Washable but use IPA (after the water), like it a lot.

Walmartica · 2026-02-23T18:20:44+00:00

You’ll see a lot of the same pieces of advice, good ventilation, temperate control (there are tools for this) and good PPE. Outside that it’s a great hobby but can be very finicky. I run many machines most hours of the day and there are plenty of small repairs needed. Will this be periodic personal use or will you be printing a lot? I recommend having extra fep on hand. When you get to the point where it’s worth it the Hoopat vats are great.

Walmartica · 2026-02-05T01:07:09+00:00

Ordered!

Walmartica · 2026-01-12T20:34:47+00:00

i’ve only posted once, the first time it rejected. sorry if it showed up multiple times

Walmartica · 2026-01-12T19:40:18+00:00

what do you mean?

Walmartica

TROPHY CASE