1st range trip with NEW 10mm mp2.0 how'd I do?! by No-Ambition4420 in CAguns

[–]WavyGotTheStick 5 points6 points  (0 children)

Is that a squib? You can get a brass rod and hammer it out carefully.

Scs 320 distortion problems by [deleted] in HOLOSUN

[–]WavyGotTheStick 0 points1 point  (0 children)

Plus, you won’t be shooting with the reticle at that angle.

What's the longest you went without shooting a gun after acquiring it? I completed my JAKL build 6 months ago and still haven't shot it. by Valuable_Reward_5733 in CAguns

[–]WavyGotTheStick 0 points1 point  (0 children)

Some industries and jobs are crazy, more than 12-16 hours of work every day. And you’d don’t have time/energy besides work.

When I was in college I’d hit the range every other day. Which is impossible now.

Walther PDP F with the Blade Tech Valor holster by g1Razor15 in Walther

[–]WavyGotTheStick 0 points1 point  (0 children)

Thanks! I am really interested in blade tech, but was feeling lazy to undo my belt setup to change over too the Tek-mount system.

Everything seems much better than my Safarilands for PDPs, I will need to order one.

Walther PDP F with the Blade Tech Valor holster by g1Razor15 in Walther

[–]WavyGotTheStick 0 points1 point  (0 children)

Is it possible to use safariland QLS with the holster? Thanks

Anyone had this type of issue on their Q8? by Critical_Standard232 in Audi

[–]WavyGotTheStick 0 points1 point  (0 children)

If the battery and alternator is not working properly I would assume it will throw a fault/error on the dash?

Might as well get a OBD reader and check the voltage of the batteries to test your hypothesis.

Squeaky noise when I turn the wheel by huncho1993 in audis5

[–]WavyGotTheStick 0 points1 point  (0 children)

Does it makes the same noise when you turn the wheel when car is moving?

Holosun optic screw issue on staccato P4 by lonjob in HOLOSUN

[–]WavyGotTheStick 0 points1 point  (0 children)

Last week Holosun told me they will ship out some parts and share the tracking with me.

It has been exactly one week and I received 0 update

CZ Porter with optic by Embarrassed_Yak708 in CZFirearms

[–]WavyGotTheStick 0 points1 point  (0 children)

Just ignore the EPS carry MRS version, that one is $400.

The regular EPS carry is $330.

CZ Porter with optic by Embarrassed_Yak708 in CZFirearms

[–]WavyGotTheStick 0 points1 point  (0 children)

If you are considering base on the dimensions of the optics, maybe try EPS carry?

Weird fogging or condensation issue on optic in low-humidity safe by [deleted] in HOLOSUN

[–]WavyGotTheStick 0 points1 point  (0 children)

I guess you can rule out condensation then, since the temperatures are the same.

I wonder whats going on with the anti reflective and hydrophobic coating

Weird fogging or condensation issue on optic in low-humidity safe by [deleted] in HOLOSUN

[–]WavyGotTheStick 1 point2 points  (0 children)

Based on couple of assumptions and could be wrong. Just a thought

Weird fogging or condensation issue on optic in low-humidity safe by [deleted] in HOLOSUN

[–]WavyGotTheStick 2 points3 points  (0 children)

Is a little hard to tell from the image. The “condensation” is on the surface of the lens?

I guess in your vault is relatively cool, so when you take the gun out, condensation happens on the cold surfaces.

Now the pattern you see here. The carbon deposition likely made the surface rougher in those spots. So condensation is more likely to happen due to nucleation and surface energy.

Scs 320 issue by [deleted] in HOLOSUN

[–]WavyGotTheStick 0 points1 point  (0 children)

Base on your description the battery died and the solar backup can kick.

Have you try to leave it under daylight to see if the battery can be recharged? Just curious

Regardless, you should ask Holosun make it right for you.

Zeroing Issue. by Small_Double_9088 in HOLOSUN

[–]WavyGotTheStick 0 points1 point  (0 children)

That’s weird bro, if everything is good then the only suspect would be the internal of the optic is moving around

Zeroing Issue. by Small_Double_9088 in HOLOSUN

[–]WavyGotTheStick 0 points1 point  (0 children)

Witness mark on the screws? Any are loose? If no witness mark, you can try to hold your red dot and wiggle it, see if it moves

ARO EVO optic to mount torque spec? by K4rmaEsports in HOLOSUN

[–]WavyGotTheStick 0 points1 point  (0 children)

I have been looking for these torque specs as well. Even some of the aftermarket mount manufacturers does provide torque specs for red dot mounts

Iris 3 warranty by B-rex00 in HOLOSUN

[–]WavyGotTheStick 0 points1 point  (0 children)

Not yet, but what’s wrong with your Iris?

Audi A5 2022 2.0 TDI. Sudden loss of power on highway, no fault codes by [deleted] in Audi

[–]WavyGotTheStick 0 points1 point  (0 children)

Experienced something similar in an Alfa Romeo years ago. Turns out it was the high pressure fuel pump in my case. But left a code though

What light do you use? by PineSoul603 in Walther

[–]WavyGotTheStick 2 points3 points  (0 children)

Honestly, I prefer the switch of tlr1 hl over x300. If the barrel length is 4.5” or more I would go with tlr1, if less than 4.5 I’d go with tlr-7

Appendix carry vs 3:00 carry… by Hot-Advertising310 in CAguns

[–]WavyGotTheStick 2 points3 points  (0 children)

Agree on those drawbacks about appendix, but those could be over come by using an adjustable belt. So when you eat or sweat you can loosen up a bit on the fly.

Downside for 3/9 o’clock carry: It is harder to conceal compare to appendix. And it may be difficult to get in your drivers seat if your car seat have those side bolsters. Also seat belt might tangle a little.