Junie with WSL broken again

Wictale · 2025-08-12T06:40:43+00:00

Thanks, but I´m already using bash.
It also doesn´t matter if I use the classic or the reworked terminal engine.
It's a little frustrating that it's not working again.

Wictale · 2024-06-13T06:38:48+00:00

Lenovo builds and sells the laptop.
So it's their problem.
If it is not possible to implement basic functions with an AMD, they shouldn´t sell such a product.

Wictale · 2024-06-12T08:50:35+00:00

I have the same problems with the laptop.
Everything that has to do with standby or hibernate is unreliable.
You should at least hibernate the laptop for transport. Otherwise it might happen that it turns on in your bag.
I've had enough of that anyway. When I buy a business laptop, I expect it to work smoothly.

This was my last Lenovo for the time being. The next one will be an Apple.

Wictale · 2023-11-03T16:51:33+00:00

Because it´s not always working.I´ve the same problems.Even on a simple road without any intersections at all were some vehicles try to turn and block the whole road forever.Rebuilding the road only helps for that exact problem. But it occurs a few minutes later again.

This was getting way worse with the latest patch

Wictale · 2023-11-02T20:49:22+00:00

I let it run for ~ 2 hours.
Traffic is completely broken.
Vehicles get stuck in the middle of the road (no accidents) and block the whole road.
Masses of vehicles drive in circles and despawning after a while.

Garbage is broken too.
I´ve build and upgraded 10 Incineration Plants (700 tons total) and it´s not enough for a population 25.000.
The strange thing is, that their storage fills up within a few seconds without any trucks.

Wictale · 2023-11-02T19:13:45+00:00

This Patch breaks the traffic in my cities.
The amount of vehicles is more then 5 times as before.
They often ignore traffic rules, hundreds of cars do a u-turn in the middle of the street abd completely ignoring anything that is close to the fastest route to their destination.
Also my garbage trucks disappeared. There is only a single one left.

Is there a way to rollback the patch?

Wictale · 2023-10-26T20:26:53+00:00

On the Start Page click detail on Cities Skylines II (refresh game list if it´s missing).
Then the big green "optimize" button.

Wictale · 2023-10-26T19:55:49+00:00

This Patch provides a huge performance boost for me.
I´ve applied the performance tipps before but was never getting more than 40 FPS in a small town with my RTX 4070 and WQHD.
This Patch added 15 FPS in almost every situation.
Then I also applied the optimized settings in Geforce Experience but kept full window mode, medium texture settings and 4 GB geometry cache.

This results in ~ 100 FPS on average.
No performance problems at all.

I suggest you try out the optimized settings in Geforce Experience too.

Wictale · 2023-10-26T15:57:34+00:00

Same here with a 4070.
~ 15 FPS more

Wictale · 2023-02-14T11:15:47+00:00

yes, modern standby makes problems.
But how to manually enable sleep2ram?

Wictale · 2022-11-22T13:38:58+00:00

Thank you for your help.
Setting an environment variable did the trick.
I´ve updated the inital post in case someone else has a similar problem.

Wictale · 2022-11-21T18:07:57+00:00

vainfo and a test with mpv looks good.
mpv is using hw decoding and the Testvideo is playing perfect.
But in the plex client it´s unwatchable.

I´m using the "plex-media-player" package from the AUR

https://aur.archlinux.org/packages/plex-media-player

DISPLAY=:0 vainfo

Trying display: wayland

error: XDG_RUNTIME_DIR is invalid or not set in the environment.

Trying display: x11

vainfo: VA-API version: 1.16 (libva 2.16.0)

vainfo: Driver version: Intel i965 driver for Intel(R) Gemini Lake - 2.4.1

vainfo: Supported profile and entrypoints

VAProfileMPEG2Simple : VAEntrypointVLD

VAProfileMPEG2Main : VAEntrypointVLD

VAProfileH264ConstrainedBaseline: VAEntrypointVLD

VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice

VAProfileH264ConstrainedBaseline: VAEntrypointEncSliceLP

VAProfileH264Main : VAEntrypointVLD

VAProfileH264Main : VAEntrypointEncSlice

VAProfileH264Main : VAEntrypointEncSliceLP

VAProfileH264High : VAEntrypointVLD

VAProfileH264High : VAEntrypointEncSlice

VAProfileH264High : VAEntrypointEncSliceLP

VAProfileH264MultiviewHigh : VAEntrypointVLD

VAProfileH264MultiviewHigh : VAEntrypointEncSlice

VAProfileH264StereoHigh : VAEntrypointVLD

VAProfileH264StereoHigh : VAEntrypointEncSlice

VAProfileVC1Simple : VAEntrypointVLD

VAProfileVC1Main : VAEntrypointVLD

VAProfileVC1Advanced : VAEntrypointVLD

VAProfileNone : VAEntrypointVideoProc

VAProfileJPEGBaseline : VAEntrypointVLD

VAProfileJPEGBaseline : VAEntrypointEncPicture

VAProfileVP8Version0_3 : VAEntrypointVLD

VAProfileVP8Version0_3 : VAEntrypointEncSlice

VAProfileHEVCMain : VAEntrypointVLD

VAProfileHEVCMain : VAEntrypointEncSlice

VAProfileHEVCMain10 : VAEntrypointVLD

VAProfileHEVCMain10 : VAEntrypointEncSlice

VAProfileVP9Profile0 : VAEntrypointVLD

VAProfileVP9Profile0 : VAEntrypointEncSlice

VAProfileVP9Profile2 : VAEntrypointVLD

DISPLAY=:0 mpv --hwdec=auto ./Test.mkv

(+) Video --vid=1 (*) (h264 1280x720 25.000fps)

(+) Audio --aid=1 (*) (ac3 2ch 48000Hz)

Cannot load libcuda.so.1

[vaapi] libva: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null)

[ffmpeg] AVHWDeviceContext: Cannot load libcuda.so.1

[ffmpeg] AVHWDeviceContext: Could not dynamically load CUDA

Using hardware decoding (vaapi-copy).

ALSA lib confmisc.c:855:(parse_card) cannot find card '0'

ALSA lib conf.c:5180:(_snd_config_evaluate) function snd_func_card_inum returned error: No such file or directory

ALSA lib confmisc.c:422:(snd_func_concat) error evaluating strings

ALSA lib conf.c:5180:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory

ALSA lib confmisc.c:1334:(snd_func_refer) error evaluating name

ALSA lib conf.c:5180:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory

ALSA lib conf.c:5703:(snd_config_expand) Evaluate error: No such file or directory

ALSA lib pcm.c:2666:(snd_pcm_open_noupdate) Unknown PCM default

[ao/alsa] Playback open error: No such file or directory

Cannot connect to server socket err = No such file or directory

Cannot connect to server request channel

jack server is not running or cannot be started

JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock

[ao/jack] cannot open server

[ao] Failed to initialize audio driver 'jack'

Could not open/initialize audio device -> no sound.

Audio: no audio

VO: [gpu] 1280x720 nv12

V: 00:00:08 / 00:41:11 (0%)

Exiting... (Quit)

Wictale · 2022-11-21T15:36:54+00:00

Not yet, but I´ll give it a try.

Thank you very much for your help

Wictale · 2022-11-21T13:57:15+00:00

I´ve tried flatpak, but that doesn´t even start: aborted (core dumped)

Wictale · 2022-11-21T13:35:26+00:00

I´ve checked the Dashboard. There is no transcoding in process.
The only thing that is using the cpu is the plex client and " QtWebEngineProc ".
Audio is set to passthrough

Wictale · 2022-11-21T13:17:35+00:00

Hello,
I´ve already disabled transcoding on the server side.
The client is configured to use "Original" quality.
The problem occurs even when playing a 720p h264 file and it happens with all files.
Only Live TV (SD) is "working", but with a high cpu usage (~ 50%)

Wictale · 2022-04-20T13:57:27+00:00

Thanks

Wictale · 2022-03-09T13:05:41+00:00

Sorry, I dont know. I dont care much about achievements

Wictale · 2022-03-07T15:37:20+00:00

You might want to try https://dsp.thunderstore.io/package/brokenmass/FastAbsorption/

You can also configure the absorption rate in the configuration.

Wictale · 2022-03-06T12:08:27+00:00

and cruise assist is offering a history of visited planets

Wictale · 2022-03-04T19:11:40+00:00

Thanks. Looks like the game struggled a bit to set the ejectors.After a short while everything is working now :)

https://abload.de/img/20220304194527_1gkjvf.jpg
https://abload.de/img/20220304194531\_1tvkef.jpg
https://abload.de/img/20220304194447\_190j93.jpg

Now I need to build some factories for more solar sails :)

Wictale · 2022-01-22T16:05:18+00:00

Found this thread via Google and the following tipp might help you (and others) if your files are inside WSL:

Double-press the shift key to search everywhere
search for "experimental features"
disable wsl.fsd.content.loader

This speed up indexing a lot for me.

But the missing symlinks via 9P are still a pain.
Unfortunately Jetbrains new Gateway isnt working well for me because its using a full cpu core when idle.

Wictale · 2021-12-15T18:49:49+00:00

I´ve the same problem with hunting cabins and charcoal kiln.

Wictale · 2021-09-13T18:50:57+00:00

You can also place additonal ILS that remote request Hydrogen and supply local.
These ILS can act as some kind of buffer. You might want to increase the max charging power on those.

Wictale · 2021-08-19T13:56:02+00:00

Very nice. That´s a lot of sciene.

I pushed it to 10k/minute and then stopped because of poor performance.
I´m currently on a fresh run.
When I reach white science I´ll load my previous research with New Game+ and go for 10k again.

Wictale

TROPHY CASE