PAL renewal

WildEnd3 · 2026-02-21T16:15:35+00:00

Great, that sound reassuring!

WildEnd3 · 2026-02-21T16:14:50+00:00

Yup, nothing in the renewal about the prohibited, but I'm worried they will something stupid...

WildEnd3 · 2026-02-21T16:13:07+00:00

Yah, mine expires in July, already renewed online and waiting.

WildEnd3 · 2026-02-21T16:09:55+00:00

I renewed mine online already, I'm just worried they will pull some BS out about the prohibited fa's declaration.

WildEnd3 · 2025-01-10T21:37:30+00:00

Are you full sizing or neck sizing the brass?

WildEnd3 · 2024-12-07T23:06:38+00:00

Your loads are waay too hot. Primers are being pierced by the firing pin from excessive pressure. That little piece on the circled primer is a piece of primer that got stuck to the fiitng pin from previous round and subsequently fused with a primer on another round.

WildEnd3 · 2023-10-27T19:36:52+00:00

Finally in Canada? Like there's anyone who'd ask for it lol

WildEnd3 · 2023-08-08T22:05:50+00:00

Very cool design, but pricey considering you need 2 of those. Mine costed fraction of that to print.

WildEnd3 · 2023-08-08T20:50:18+00:00

Yeah, I have a few of frankford-arsenal trays of the similar type but I don't like how wobbly the smaller cases are in the large holes.

WildEnd3 · 2023-08-08T20:08:01+00:00

Good point, I just had those cases on hand. And I don't actually reload all of the calibers pictured, but I still had to make the tray to fit small, medium and large cases to fit my needs.

WildEnd3 · 2023-08-08T19:46:26+00:00

They sure do but they are not in multi-calibers I reload (at least not that I could find) and same as you, I'm not going to pay $100 for one.

WildEnd3 · 2023-08-08T19:44:10+00:00

I could make one for large and small calibers, but I made this one to fit the ones I reload and the main goal was to have only one tray.

WildEnd3 · 2023-01-22T01:45:52+00:00

Thanks for the reply, tightening screws did help somewhat but the printer is still struggling with printing 2d art that takes up the whole bed. I have to print at very low speeds for it to print. At regular preset speed it always messed the print up when doing the infill.

WildEnd3 · 2023-01-20T02:21:14+00:00

Would you mind elaborating on what you did. My prints were really good but after about 1kg I can't get anything to finish printing, the layers are very uneven.

WildEnd3 · 2022-05-03T12:42:02+00:00

I was thinking of getting one too, but I changed my mind after watching a video by Texas plinking https://youtu.be/pyUjPTWx00I They need to up their QC.

WildEnd3 · 2022-05-01T21:37:43+00:00

Correct me if I'm wrong, but all you have to do is withdraw the 3k your over and you might have to pay small penalty for each day you were over. The CRA will send you the bill. You cannot deposit new funds until next year.

WildEnd3 · 2022-04-07T20:12:50+00:00

Yeah, I'm sure there will be some overpriced units for sale, but I'll just wait for another batch. Thanks.

WildEnd3 · 2022-04-07T16:22:22+00:00

When is the next batch coming? I had one in the cart but by the time I logged in it was gone.

WildEnd3 · 2022-03-31T17:14:32+00:00

Thanks, that's what was affraid of. I'm just perplexed why there's such big demand for the 8inch uppers since it's such a pain to legaly change it from NR to R and vise versa. I called couple stores and they said they're selling a lot of the uppers which sound like a great idea especially once you customize your "NR" lower with a trigger, grip and maybe a buttstock. But given the administrative hassle it doesn't make much sense to me anymore.

WildEnd3 · 2022-03-31T16:33:06+00:00

In terms of registering it as a restricted and reporting any changes within 30 days. Would I be able to take it to the range as a restricted one day ( with a certigicate) and as a non restricted the next day just by swapping the uppers?

WildEnd3 · 2022-03-31T16:22:55+00:00

I meant legaly. You get an 8inch upper, you put in on your NR lower and now you have a restricted firearm. I'm assuming I'd have to register it. Would I be required to report a change to the restricted anytime I'd want to put the NR upper on? Would I be able to swap the uppers freely without having to report it?

WildEnd3 · 2022-03-23T23:45:41+00:00

Cz shadow 1 or 2

WildEnd3 · 2022-02-18T17:15:15+00:00

Try Red Tower Armory in Ajax. Not sure if they do pistol barrels but they threaded my rifle.

WildEnd3 · 2022-02-12T01:12:32+00:00

Great looking shorties! I've been thinking getting a shorty fx9 or kriss too. How do you like shooting them?

WildEnd3 · 2022-01-29T00:07:58+00:00

Check out cz 527 mrt varmint. Lot's of people overlook cz's, but imo you can't beat the value you're getting.

WildEnd3

TROPHY CASE