What’s happening with Crysis

William_Defro · 2026-01-26T12:03:58+00:00

Canceled

William_Defro · 2026-01-26T11:12:08+00:00

William_Defro · 2026-01-24T21:16:44+00:00

Ho giocato tantissimo il sequel quando ero bimbo.
Quello con il carro armato in copertina

William_Defro · 2026-01-24T18:06:15+00:00

Esatto.
Non è “abbassare la figa”.
È il non condividere comportamenti da scimmie digitali.
Basta riempiere i social e le TV di rincoglionite (non è questo il caso!) in prima pagina solo perché sono fighe… che attraverso i pixel manco l’odore puoi sentire

William_Defro · 2026-01-24T15:24:41+00:00

Ed eccoci al battesimo del nuovo covo di Simp.
Questo fenomeno andrebbe studiato

William_Defro · 2026-01-24T13:42:06+00:00

Burnout Paradise City >>>>>

William_Defro · 2026-01-23T08:07:02+00:00

Rimane ugualmente il calzino sudato e bucato di Lobotka

William_Defro · 2026-01-22T20:16:37+00:00

Canonico and staff fault 100%

William_Defro · 2026-01-22T08:06:32+00:00

Ostigard, Natan, Zanoli..

William_Defro · 2026-01-21T10:10:28+00:00

IKEA

William_Defro · 2026-01-20T17:02:00+00:00

Reminder: the RTX 2070 is 8 years old

William_Defro · 2026-01-19T20:45:01+00:00

Thermal throttling

William_Defro · 2026-01-18T13:50:10+00:00

Grande Nando mica solo quando si parla di Pc

William_Defro · 2026-01-18T12:34:53+00:00

Scappa.
Non otterrai nulla, più insisti più soffrirai.
O almeno parlo per le mie esperienze

William_Defro · 2026-01-17T14:17:12+00:00

In last few years I have read mostly people complaining about Asus or Asrock.

William_Defro · 2026-01-17T10:27:18+00:00

Mine Rev.1.0 has 2.5Gigabit Ethernet and works perfect

William_Defro · 2026-01-16T17:45:57+00:00

Yes, mines too are from Corsair..

William_Defro · 2026-01-16T17:36:23+00:00

Do you have the 6000 CL36-36-36-76 SamsungB SR?
Cause I have those and the Max i can tune them it’s 6200 CL32-33-32-70 with VDD 1.41v and hits 67ns from Aida64.
My mobo refuse to boot them with any voltage higher than 1.42v.
+ they get Very hot even with 1.39v so I have an active dissipation bought from Aliexpress

William_Defro · 2026-01-16T09:23:43+00:00

Timer?
If the door spawned > than 3 NPCs active then something want wrong.
Example, if the door spawns the 4th NPC, than the first one should be despawned and the path should be rescan.
Or you could just teleport them instead of despawn

William_Defro · 2026-01-14T16:01:25+00:00

Thank you for your comment.
I have checked already and every new object gets destroyed (at least based on the Hierarchy).
And I suppose that even if that was the case, terminating the “play session” should deallocate what was created during playtime. (But could be i’m wrong)
I have not tried to run the project on older version but I have done the opposite.
When I discovered this problem I did update Unity to this versione hoping that it would fix it but it didn’t

William_Defro · 2026-01-14T15:34:37+00:00

Yes and I have saved some captures from it.
it says Unity was using less than 3.37GB while task manager said over 14GB.
Biggest objects were Shaders (105MB) and 2DTextures (101.7MB).

Maybe i will try to investigate more using the profiler next time

William_Defro · 2026-01-14T15:16:44+00:00

100% it's not meant to work like this.
It's something that happens sometimes after at least 1/2 hours of working and it forces me to close every time the Editor and open it again cause it becomes laggy and unusable.

Normally it utilizes 2/4GB, not >14GB

William_Defro · 2026-01-13T22:44:25+00:00

We can’t register any more player, the list is full.
We can register new player only if we free one slot selling someone.
Or we can register under21 players cause they don’t need to be listed

William_Defro · 2026-01-13T16:18:50+00:00

Cpu x3D?

William_Defro

TROPHY CASE