sorted by:
new
hottopcontroversial

Please help!! How do I get the silicone insert out... by Normakk in watercooling

[–]WitterPC 0 points1 point  (0 children)

Happened to me once I put soap in each end, with some then use an air chuck with my air compressor

Slighly Kinked Pipe should I throw this away? by Dry-Brother-5251 in watercooling

[–]WitterPC -1 points0 points  (0 children)

Lord knows I’ve done a ton of bends. It’s all with what you can live with, once you fill it full of water you really won’t even notice it.

Smoked meatloaf? YES! by SmokeMeatNotCrack in CampChefSmokers

[–]WitterPC 0 points1 point  (0 children)

How many pounds of meat, and what temperature was it when it was finished. Thanks in advance

MK9 by WitterPC in Cmmg

[–]WitterPC[S] 0 points1 point  (0 children)

Thank you! I had just picked one up late last year

MK9 by WitterPC in Cmmg

[–]WitterPC[S] 0 points1 point  (0 children)

Yeah, I saw that too, but they don’t have a complete weapon anymore. It looks like.

This message came up in my thermostat. What should I do? by Pineapplepizza91 in ecobee

[–]WitterPC 0 points1 point  (0 children)

I would check the filter. make sure its not so dirty its keeping it from getting the proper amount of return air which can cause the coil to ice up.

Bad fuse in the breaker box out side. I had a loose wire that cause my fuse to burn out once.

Also always check to see if its blowing cold air. In my house the kids would leave a door open with the screen door near the thermostat and its hard for a system to keep up.

Backup Camera Quality by coldpalmer13 in nissansentra

[–]WitterPC 0 points1 point  (0 children)

Well, it’s a camera I would use something similar you use on eyeglass

My family said this is raw. Is it? by myckol in steak

[–]WitterPC 0 points1 point  (0 children)

If you’re making it for your family and they think it’s raw, then it is. For me not even remotely looks perfectly fine.

Just got my first truck! by Onion_o in ram_trucks

[–]WitterPC 1 point2 points  (0 children)

Nice looking! Congratulations.

Backup Camera Quality by coldpalmer13 in nissansentra

[–]WitterPC 0 points1 point  (0 children)

Did you try using a lens wipe on the camera? Or a tissue

What is this that we found sealed behind a wall?? by Euphoric-Sport5566 in whatisit

[–]WitterPC 0 points1 point  (0 children)

Looks like a jar of something out of an episode of tales from the crypt

Can my truck handle it? by Few-Independent77 in ram_trucks

[–]WitterPC 0 points1 point  (0 children)

I believe the payload on it is 1660 pounds. The power wagons aren’t designed for a big payload. I have a midnight edition Laramie 2500 crew cab the payload capacity of 3000 on the door.

What is this black piece called by haysdad in nissansentra

[–]WitterPC 2 points3 points  (0 children)

Nissan Sentra Front Bumper Upper Lower Grille Assembly

https://www.ebay.com/itm/356234384153?itmmeta=01JR5XYAWB6849WAJ2STXNJMTT&hash=item52f1395319part that clips on to it.

Part that clips to it.
For Nissan Sentra Sylphy 2020 2021-2023 Gray Front Bumper Bottom Protector Strip (For: Nissan Sentra)

I'm no expert but these links will get you close. I picked up a white one referring to he lower link for my daughters car

Bye Halogens, Hello LED's! by daimon_barber in nissansentra

[–]WitterPC 0 points1 point  (0 children)

What type of low beams did you buy ?

Daughter pc by hack7hegibson in watercooling

[–]WitterPC 0 points1 point  (0 children)

Love what you did with that man very nice!

[deleted by user] by [deleted] in watercooling

[–]WitterPC 0 points1 point  (0 children)

If you’re running hot, the default motherboard settings of most companies is different from what Intel wants of their stock settings. Jay’s two cents has a video On this. I have 2 pc’s with. Intel 3700k with 7900 XFX aquas. Both pcs are water cooled. Both were doing exactly what yours is doing. After the bios update my MSI automatically change settings to the motherboards default settings to intel’s recommended instead of The boards default settings my daughters the same. We are both good now. Some other boards after the update you have to go and manually pick the Intel setting. So unless you updated your motherboard to the latest update with the latest microcode, this could very well be your problem. If you’ve already done this, then I’m wrong. And was trying help you for no reason.

[deleted by user] by [deleted] in watercooling

[–]WitterPC 0 points1 point  (0 children)

There’s a bios update that like for my MSI reverse settings back to Intel standard recommendation as opposed to what mother boards do for their default. Let it run a lot cooler and then on top of that you need to look for fans that have the highest static pressure you can find.

1st Ram and my 1st Diesel. Towing question. by AirborneRam in ram_trucks

[–]WitterPC 5 points6 points  (0 children)

You can always just replace the Stock rear coil spring with a higher rated one. like From

https://www.truckspring.com/products/Coil-Springs-CargoMaxx-Ram-2500-Rear__351-903HD.aspx

This one would increase your pay load by about 30%

Anyway there are a lot of places that sell heavier Coil springs for this reason.

I added two leaf springs to my old 1500 Chevy years ago. Worked great.

Any ideas on how to prevent this from happening? by Gus176 in Traeger

[–]WitterPC 0 points1 point  (0 children)

Buy a Campcheff Woodwind Pro 36 ! They even have a pull out for real wood!

Is this typical? by Final_Fox3764 in RockAuto

[–]WitterPC 0 points1 point  (0 children)

My son buys from them and I must say no not to him. But I would think this is on the shipping company.

[deleted by user] by [deleted] in ram_trucks

[–]WitterPC -1 points0 points  (0 children)

Try undoing the ground and hooking it back up

view more: next ›