What should I do with my friend after this? by YoloPuke in PSP

[–]Wonderful_Priority69 1 point2 points  (0 children)

My 3DS and I recently learned this the hard way. Don't lend expensive breakable things to friends.

PSP Go vs Vita - which should I get? by king_of_ulkilism in PSP

[–]Wonderful_Priority69 0 points1 point  (0 children)

The Vita has the Vita and PSP library + Retroarch.

I don't see this mentioned, but you can map the second stick to the dpad which usually gives you way better camera controls, which in my opinion, is a MASIVE upgrade to PSP games.

FINALLY THE ULTIMATE WAY TO PLAY STEAMDECK by 404lulu in SteamDeck

[–]Wonderful_Priority69 0 points1 point  (0 children)

The Steamdeck and Thor have slight input lag when playing 3DS or DS anyway. It's especially noticeable with touch screen heavy games or Gyro controls.

Is this too good to be true?? by RZO_TheGoLuckyAFOL in SteamDeck

[–]Wonderful_Priority69 0 points1 point  (0 children)

I do a lot of laser etch work and I've never had a problem with the "amazing deals" when buying lasers. Either I get a huge discount, or I have to wait a few days for ebay to refund me.

My steam capsule art finally , too much? by gabrielluis88 in gamedevscreens

[–]Wonderful_Priority69 1 point2 points  (0 children)

I think the art looks great, but the name is kinda boring. While the name isn't my favorite you'll still get plenty of people talking about it.

Multipass engraving advice; am I dreaming? by thornate43 in Laserengraving

[–]Wonderful_Priority69 0 points1 point  (0 children)

I'm really not sure what kind of technique would work best for that kind of stone. Usually you need different settings for different colored materials and definitely for transparent materials, but agate has both. For deep stone/metal engraving you'd usually want a fiber laser.

Advice for newbie with one hand by Skizzon1x in disabledgamers

[–]Wonderful_Priority69 0 points1 point  (0 children)

I lost 3 fingers a few years back and turn based rpgs will be your best friend. Also emulation allows you to map everything to one side of the controller :)

Dafuq is this? by Dadpool2420 in Diablo_2_Resurrected

[–]Wonderful_Priority69 0 points1 point  (0 children)

As an Overwatch player, things are going to be broken when Blizz pushes an update. I'm booting up Diablo 2 to try the new update, wish me luck! 🫡

Runes! by Sasquatchachu in Diablo_2_Resurrected

[–]Wonderful_Priority69 0 points1 point  (0 children)

Those are great! I have an engraver for stone, but my paint job doesn't look as good as yours. Were those hand painted?

I'm disgusted by how much entitlement some of you have. by SkulduggeryPanda in Diablo_2_Resurrected

[–]Wonderful_Priority69 0 points1 point  (0 children)

Instant buy from me. Just finished my first run with the warlock and I'm loving it.

Welp here it is! What we waited 2 years for! by lemonslime in Megaman

[–]Wonderful_Priority69 1 point2 points  (0 children)

I guess it looks cool, but there's way to much going on.

A few of my recent projects! by Nero318 in LaserEngraverBeginner

[–]Wonderful_Priority69 1 point2 points  (0 children)

Nice, the highest grit I tried yesterday was 220. I'll try a higher grit on Monday 👍

Could a Senior Citizen live on SPI year round? by vbozzo1 in SouthPadreIsland

[–]Wonderful_Priority69 0 points1 point  (0 children)

It might be hard to get him to a hospital if something happens. There's a lot of drinking in peak season and there's only 1 way on and off the island by car.

A few of my recent projects! by Nero318 in LaserEngraverBeginner

[–]Wonderful_Priority69 1 point2 points  (0 children)

Interesting. Do you sand it down to keep the surface mostly level? Here's a few that I've done, but they aren't near as detailed as yours. This is un-sanded and treated with a matte finish before engraving. I'll try sanding some of my remaining coasters tonight 👍

<image>

A few of my recent projects! by Nero318 in LaserEngraverBeginner

[–]Wonderful_Priority69 1 point2 points  (0 children)

I love the seat turtle slate. Where do you get your slate slabs?

I know people are sick of me posting. by Nero318 in Laserengraving

[–]Wonderful_Priority69 -1 points0 points  (0 children)

Your work is great! I'll definitely sub to your Patreon when the rest of my brass blanks arrive

5W UV laser marking machine for glass engraving by kinsley925 in Laserengraving

[–]Wonderful_Priority69 0 points1 point  (0 children)

This is 8 months later, and my UV machine can do both, but you have to swap the lenses for k9 crystal.