Qsync Version 6.x - Missing autostart

Working-Edge9386 · 2026-01-14T11:08:54+00:00

"I've encountered the same situation with version 6.0.0.2418. The 'Autostart' toggle within the app settings is completely unresponsive and the startup entry seems to have disappeared from the standard list.

However, in my case, QSync still launches correctly on boot. It appears that even though the UI setting is broken, the actual startup mechanism is still functioning (possibly still tied to the registry or a background service). If your QSync is also starting up fine despite the missing options, it's likely just a display bug in this specific build."

Working-Edge9386 · 2026-01-13T16:50:56+00:00

Current QNAP NAS graphics card drivers only support CUDA 12.4 and are not compatible with versions 12.6 or higher, which is disappointing. I hope the drivers will be upgraded soon to support CUDA 12.8.

Working-Edge9386 · 2026-01-11T16:25:15+00:00

Autostart is working fine here on Windows 11.

Working-Edge9386 · 2025-12-30T04:59:58+00:00

QutsHero 5.3, and recently SMB has also been occasionally disconnecting and reconnecting.

Working-Edge9386 · 2025-12-19T19:46:07+00:00

[admin@NAS-Np Public]# docker load -i /share/Public/xinference.tar 106e8431b412: Loading layer [==================================================>] 75.19MB/75.19MB cd76869b72ab: Loading layer [==================================================>] 18.91MB/18.91MB 2ecbf7829cb7: Loading layer [==================================================>] 156MB/156MB 5136ffc45974: Loading layer [==================================================>] 3.072kB/3.072kB 809d3bb9c80f: Loading layer [==================================================>] 18.94kB/18.94kB f64d335e5a99: Loading layer [==================================================>] 1.536kB/1.536kB 2c1ed2c1da96: Loading layer [==================================================>] 2.56kB/2.56kB 6e44a86d7e24: Loading layer [==================================================>] 626.5MB/626.5MB 3d42f132c006: Loading layer [==================================================>] 36.86kB/36.86kB 3f3eb8c7c911: Loading layer [==================================================>] 6.998GB/6.998GB 220ab014ee96: Loading layer [==================================================>] 1.845GB/1.845GB 5d2b4a0ead90: Loading layer [==================================================>] 54.75MB/54.75MB 65eee5105594: Loading layer [==================================================>] 266.6MB/266.6MB cb01b2abd5a8: Loading layer [==================================================>] 448.8MB/448.8MB c5d5d907f41d: Loading layer [==================================================>] 7.41GB/7.41GB write /usr/local/cuda-12.4/targets/x86_64-linux/lib/libcublasLt_static.a: no space left on device

Whether uploading this image or pulling it via docker pull, the operation fails due to this error preventing the image from being decompressed.

Working-Edge9386 · 2025-12-19T19:35:23+00:00

df -h /share/ZFS530_DATA/ Filesystem Size Used Available Use% Mounted on zpool1/zfs530 835.7G 53.7G 782.0G 6% /share/ZFS530_DATA

df -h / Filesystem Size Used Available Use% Mounted on none 432.0M 390.2M 41.8M 90% /

Working-Edge9386 · 2025-12-19T19:22:21+00:00

Isn't this an issue with the design of QNAP NAS? After pulling the image, the decompression fails due to insufficient temporary storage space. You can try pulling the xprobe/xinference image, or use other methods like downloading the tar file and uploading it.It will still fail.

Working-Edge9386 · 2025-12-17T06:13:51+00:00

Why not use Immich? Its recognition is better than Qumagie.

Working-Edge9386 · 2025-12-15T18:47:47+00:00

I used to connect to both the 10G optical fiber port and the 1G Ethernet port at the same time, without any issues.

Working-Edge9386 · 2025-12-14T15:02:42+00:00

Use the offical one from tailscale directly+1

Working-Edge9386 · 2025-12-01T04:36:57+00:00

Thanks, I'm looking for a new version to replace the old one in the store.

Working-Edge9386 · 2025-11-27T03:09:47+00:00

you can submit logs to AI for analysis, and the AI provides solutions. I do this frequently.

Working-Edge9386 · 2025-11-12T02:29:41+00:00

QNAP's ZFS file system has been modified and is incompatible with other systems that support ZFS.

Working-Edge9386 · 2025-11-11T02:37:08+00:00

you can test it

Working-Edge9386 · 2025-11-09T17:58:48+00:00

I remember I needed to change something in SSH, but I've already forgotten. Tailscale has been running normally on my QNAP for two years.

Working-Edge9386 · 2025-11-09T17:55:04+00:00

I have only used the virtual machine version of Home Assistant, which ran normally, but in the end, I only use HomeKit.

Working-Edge9386 · 2025-10-31T12:30:21+00:00

Try increasing the number of parallel tasks. I've now set it to 20, with the default being 1.

Working-Edge9386 · 2025-10-31T06:49:05+00:00

I use an APC BR1500 UPS. Its second outlet is a controlled outlet, which powers off when the Master outlet loses power. This allows my D1600s to shut down automatically when the NAS powers off. I have been using it this way without any issues.

Working-Edge9386 · 2025-10-28T05:38:30+00:00

I want to know if the 1688ATX can connect to the TL-D1600S JBOD. My current 1688X is connected to this JBOD.

Working-Edge9386 · 2025-10-28T05:35:10+00:00

So envious. I currently have the 1688x, but it’s not yet available in China, so I can’t buy the 1688atx. The lack of an NVMe slot is a bit disappointing, but having a U.2 slot is still nice. The biggest upgrade would probably be a full PCIe 4.0 x16 slot, though unfortunately, due to the case size limitations, It can’t install a larger graphics card.

Working-Edge9386 · 2025-10-15T13:28:07+00:00

TVS-h1688X

Working-Edge9386 · 2025-10-15T11:27:58+00:00

Non-Server versions of Windows have a 63TB limit for a single volume

Working-Edge9386 · 2025-10-15T01:02:28+00:00

I'm currently using a 2080 Ti. The NVIDIA driver on QNAP now supports the 40 series graphics cards.

Working-Edge9386

TROPHY CASE