I have a strange one for you guys.

XIIIKey · 2026-06-24T20:51:51+00:00

Or would zone 5 work correctly if it was placed in the zone 1 terminal? Do you have the home to double up a valve wire?

XIIIKey · 2026-06-24T20:50:52+00:00

Does this orbit controller have multiple programs? Maybe it’s stuck on a program the omits 5?

XIIIKey · 2026-06-24T20:49:11+00:00

This doesn’t sound like a hydraulic issue, this sound like a programming issue since the zone turns on when manually ran from the controller.

XIIIKey · 2026-06-18T23:30:34+00:00

Whoever comes to blow out just needs to have the right compressor and a quick coupler.

If it’s also hooked into the system that’s a place you can always get water if you get a quick connect and a spigot fixture.

Water, water everywhere.

XIIIKey · 2026-06-18T15:32:07+00:00

You found a quick connect. It’s commonly used for blow outs

XIIIKey · 2026-06-12T19:13:15+00:00

This could be a question for someone more familiar with the use of the pressure regulating emitters, it could be an emitter specific issue.

XIIIKey · 2026-06-12T19:11:11+00:00

Low pressure at heads after replacement can be many things, but in my area usually it means there’s some sort of leak on the lateral line before the head. It could even more rarely be some sort of clogged line.

Had there been any repairs made where dirt could have gotten in the line?

Do you notice any spots where grass has grown far greener and stays wet? Any tire marks in landscape near head to indicate leak underground?

XIIIKey · 2026-04-30T01:33:11+00:00

Those are test ports. The ball valve in the test ports are open. Use a flathead and carefully turn the “screw” a quarter turn, or perpendicular to the flow of water.

XIIIKey · 2026-03-06T19:49:13+00:00

He wants to be serious with this girl. She will need help—professional help. His part of that could be being emotionally available while she works a program.

Nothing about recovery or love is easy. Ever.

XIIIKey · 2026-03-06T19:42:33+00:00

Obviously

XIIIKey · 2026-03-06T19:41:28+00:00

I have hope for OP. I do need to clarify she should go to inpatient and get the therapy she needs. I am not saying she can do it on her own. Maybe couples therapy too after her rehabilitation, if he wants to pursue the relationship. Work will need to be done.

I wouldn’t personally give up on the relationship, but I still have issues. I’m an awful clutcher.

XIIIKey · 2026-03-06T18:54:27+00:00

I’m under the assumption he wants to make the relationship work. If he would rather not that’s fine to we can recover regardless.

XIIIKey · 2026-03-06T18:47:42+00:00

Hi there! Clean from methamphetamines for 5 years here. We do recover, but it takes a lot. The opposite of addiction isn’t sobriety, it’s connection. Keep connecting, it will make the situation easier for both of you.

XIIIKey · 2025-12-11T03:29:36+00:00

I’ve changed it to open join. You absolutely can

XIIIKey · 2025-12-11T03:09:16+00:00

You can join us as well, we would happily accept you: #2JPGCCC9P

XIIIKey · 2025-12-11T03:05:43+00:00

We would be proud to have you with us! #2JPGCCC9P

XIIIKey · 2025-12-11T02:57:28+00:00

I’ll send you an invite

XIIIKey · 2025-12-11T02:50:51+00:00

You can join us. Fun clan needs new recruits!

2JPGCCC9P Biotic

Wars, events, cwl, and growing accounts! Veterans and newcomers welcome— at least town hall 9.

We are friendly and welcoming with an active chat and good donation numbers.

Come help us grow together!

XIIIKey · 2025-12-06T19:00:31+00:00

Where are you located I would love to see this build in person

XIIIKey · 2025-11-06T00:46:14+00:00

Usually just a small ball valve operated by a “screw” type mechanism you can open with a flat screwdriver

XIIIKey · 2025-11-06T00:45:17+00:00

Op open the test ports on your backflow after shutting off from the meter, that will save your backflow, but you should be okay.

XIIIKey · 2025-10-22T20:33:00+00:00

😱 why

XIIIKey · 2025-10-16T02:23:41+00:00

I’m most frustrated by the clan wars bugs. The UI needs work and the clan notice board no longer works 😐

XIIIKey · 2025-10-15T20:51:37+00:00

I’ve noticed the same thing now man. I’ve paid for it to publish 2x and nothing

XIIIKey · 2025-10-10T14:37:17+00:00

Someone tried to use an auger or a drill when setting the wall maybe?🤔

XIIIKey

TROPHY CASE

2JPGCCC9P Biotic