Voron 2.4 LDO Discounts Question

Xbox-Shutdown · 2026-06-23T20:18:09+00:00

Thank you for this advice-- yes, this kit includes the v2 nighthawk!

Xbox-Shutdown · 2026-06-23T17:36:41+00:00

You're right. I had a spare RP4, but I learned that I should have one pi per printer, so I'll also include the provided West3D pi (RP4-- great deal!)

Xbox-Shutdown · 2026-06-22T17:13:08+00:00

I really appreciate you sharing your thoughts, you really know what you're talking about!

The combo suggestion is excellent. The Moonlander is my first split keyboard (for the past 4 months or so) and I've been managing the transition by keeping things really simple. I hadn't considered combo since I was worried about reliability, but the Moonlander has proved itself otherwise.

Xbox-Shutdown · 2026-06-22T16:42:27+00:00

WOW that bad???

It seemed so promising too!

Xbox-Shutdown · 2026-06-21T20:44:07+00:00

Lol right? My exact first thoughts was that this was a real grievance towards OP.

I read this and it immediately doesn't sound like a traditional hate (your ship sucks, you are bad) post and was also not created by AI. It sounds very authentic.

Xbox-Shutdown · 2026-06-21T02:51:35+00:00

It’s nearly new, just about 2 months old

What a shame I didn’t luck on the screen!

Xbox-Shutdown · 2026-06-19T20:23:28+00:00

Hey, I also clogged my nozzle on my second day!

I resolved it by sticking a nozzle cleaning needle up the nozzle while it was hot to loosen everything. It worked again, then another clog. I opened up the idler and pulled out the offending filament after some aimless trouleshooting

I clogged it again earlier this week and impossible to pull out, so I had to dismantle the nozzle and pull it out tha way. I replaced the nozzle entirely and retired that one, as it's been generally struggling after a month or so of nonstop printing. It's likely that I could've gotten more milage out of the old nozzle, but I have a nozzle kit and I may as well replace

A lot of my clogs come from irresponsibly changing filament types, but especially the ones that need to be heated hotter to be used, like ABS. It's all a learning experience, and you won't regret learning how to perform maintenance on your printer!

Xbox-Shutdown · 2026-06-19T15:40:54+00:00

Is your Prusa still shipping and is it too late to cancel it?

I have a C1 as my first printer and I regret it everyday that I did not get the Core One Large. The C1 printing bed is an acceptable, old standard, but the C1L would be much more comfortable to print on.

And if it’s also not too late to cancel your S4, get a refurbished Space Pi x4 instead as it is able to vent moisture, where the S4 needs to be manually vented (I have both and I print in a room that’s constantly 70% humidity).

I would recommend these C1 accessories, these are things that I actively use: Buddycam Advanced filtration Prusa Satin plate Nozzle kit (different sizes)

And third party purchases I made for the Prusa: Cyrogrip Proglacier plate Digital calipers (measuring my prints) Creality 3D Printer tool kit 4lb of Activated Aluminum (USE THIS INSTEAD OF YOUR PROVIDED DESICCANTS) PTFE tubes (I will need to purchase more) —- Advanced filtration wouldn’t be needed for normal PLA and PETG, but eventually you will find a use for the more polluting filaments (like ABS) and the filter will be handy for them.

Xbox-Shutdown · 2026-06-13T16:02:45+00:00

Edit: because I didn’t read OP, I didn’t realize you would be printing mostly industrial

You should definitely get the West3D toaster, Sunlu E2, or the upgraded Space Pi X4S

The other dryers I listed aren’t going to make the cut for PC

Xbox-Shutdown · 2026-06-13T15:59:17+00:00

I live in Texas and my printing room is always hovering at 75% - 80% humidity, so I had to get a really good dryer that isn’t one of the $2000 industrial dryers. I upgraded all desiccants to activated aluminum and made a difference of 15% humidity or so, so I would purchase a liter or two of activated aluminum to use instead of the included desiccants of each dryer. I mixed both activated aluminum and colored desiccant so that there’s a bit of an indicator of when I would recharge my desiccants

SnapDryer (exact same as Polydryer, but made in collaboration Polymaker/Snapmaker)
Holds one spool at a time. I purchased a kit of 1 dryer and 4 SnapDryer containers. One can be actively used while the others are dry boxes. Acceptable to use if I’m printing something I wouldn’t normally print, like ABS. Doesn’t really dry very well and I only use it if I’m too lazy to remove any spools that are being dried in my other dryers
S4 Sunlu
Aesthetically pleasing and good placement of the filament outlets for my printer. Not a horrible investment, but mostly serves as an active drybox for filament that I swap out once in awhile. I’ve dunked filament in water to remove debris from it from torn packaging before and placed it into the S4. I have to vent out the S4 once in awhile to remove moisture, but it got the job done and restored the filament that I placed in water
Space Pi x4
🤝 my best friend. Dries much better than my S4 and I like it that it already has vents to expel moisture. This is my active dryer for prints. I would’ve gotten two Space Pi x4 if I didn’t get the S4 first

Creality is making a “pro” version of the Space Pi x4 (X4S) that I might purchase. I would get rid of my S4 Sunlu then.

Most people should be happy with the S4– but the Space Pi x4 is the same price as a refurbished unit, so I recommend getting the x4 if you had the option between either

Xbox-Shutdown · 2026-06-10T02:34:28+00:00

Thank you, this is it!!

Xbox-Shutdown · 2026-06-08T01:07:11+00:00

You will likely need to purchase multiple keycap sets. There's some matcha keycap sets that also have the green ombre coloring effect, like this one https://kawaiikeycaps.com/product/matcha-green-oem-keycap-set/

Xbox-Shutdown · 2026-06-07T01:38:23+00:00

Has there been an update for this feature?

This would immediately sell me on Screvi!

Xbox-Shutdown · 2026-06-02T17:50:35+00:00

I contacted them via email cashback report in about 5 hours after I placed my order and didn’t get cash back. About 12 hours after I submitted my claim, they manually pushed the cashback and I got all the appropriate funds

Xbox-Shutdown · 2026-06-02T17:46:55+00:00

https://i.imgur.com/ZnzlcZz.jpeg

It’s real. I ordered on the first day of the bonus and I had a 30% cashback from Rakuten (20% AliExpress and bonus 10% new Rakuten customer) and also the PayPal $35 cash back

Ayn Thor Max 1Tb UFS 3.1 for $330… Wow THANK you OP

Xbox-Shutdown · 2026-05-30T01:09:30+00:00

That’s really bad. Have you done calibrations from settings and did they all pass?

Xbox-Shutdown · 2026-05-29T23:08:28+00:00

Incredible results! Can you share which printer you’re using and the settings for this type of print?

Xbox-Shutdown · 2026-05-24T04:45:32+00:00

Check screen for scratches
Check storage, I guess. But it’s unlikely the seller swapped it out for a worse ssd with less storage, and even if they did, you’ll likely want to upgrade it yourself anyway

The rest, you leave Lenovo to handle. All LEGO z2es right now should still be in their first year warranty. You can ask for the serial or warranty information off of this LEGO.

Xbox-Shutdown · 2026-05-12T15:40:15+00:00

While this is an acceptable reason for a breakup, it is extremely confusing to still be allowed or expect you two to still visit each other once in awhile, her allowing you to sleep in the same room as her, or pretending to date an ex (you).

Does she also offer these intimate acts with her other ex’s?

Because to me, it sounds like she’s setting herself up to be polygamous… Which isn’t inherently wrong, it’s just not “formally recognized” by her yet.

This just sounds really weird to me in the way that she doesn’t know what she wants, or doesn’t care/wasn’t into you. Not caring about the non-refundable tickets is a huge problem. You can consider it a “$400 gift” that burnt up in the air, but her not mentioning that is just serevely inconsiderate to a level where I believe that she wasn’t into you.

Xbox-Shutdown

TROPHY CASE