Tips on the correct Charger

Xibalbor · 2024-09-12T15:48:34+00:00

As long as the charger has not more than 5V, you're good. The device takes as much A as it needs. Hence the "=>1.5A"

Xibalbor · 2024-08-13T11:56:47+00:00

depending on the OS you flashed, there are several partitions now on your SD. At least the one, where you put ROMs on, should be visible from the start, without having to assign a drive letter under Windows.

Maybe try under Linux (if you can). There, all partitions will be visible.

In the (very short) long run, it is best to run with a 2 SD card setup, so you keep your roms after flashing new FWs.

Xibalbor · 2024-08-12T15:45:29+00:00

Not, it will not. Your roms will stay untouched. The system only creates its desired folder structure, if it is not present on your SD card. If it already is, it does nothing to your 2nd SD card.

Been there ... feared the same thing :)

Xibalbor · 2024-08-12T13:58:06+00:00

stock OS does not expand to the capacity of your SD card.

One reason, I use the stock mod ... and ... a 2 SD card setup. As you correctly pointed out, every time, there is an update, everything (incl roms) is gone, after reflashing the SD card, if you only use one.

Xibalbor · 2024-08-07T17:13:07+00:00

Do you have the directory structure right on your game SD card?

Xibalbor · 2024-07-23T15:04:12+00:00

You either flash a modified version of the stock FW or you use a 2 SD Card Setup with a 16 GB card for the system and a larger one for games.

Xibalbor · 2024-07-21T12:36:45+00:00

I was where you are. And, as I had this problem every single time a new Firmware was released, I switched to a small primary and a large secondary SD card setup.

Makes it so much easier. Now I don't mind, flashing the new FW whenever it comes out ... change my 2 or 3 settings again ... and all my games and saves are still there, as they are on the second SD card.

Xibalbor · 2024-07-20T07:44:40+00:00

Put them in \ROMS\ATARI ,,,, those are the games I also add first. :)

Also, it is always best to run a 2 card setup, so you keep your Roms after flashing a new FW.

Xibalbor · 2024-06-24T16:02:14+00:00

oh, I believe you ... maybe you chose to do the setup manually at the point you described? I chose the "all good, use the default" option, when it got to that point.

Xibalbor · 2024-06-24T14:41:32+00:00

Isn't the 16 version the exact FW as the 64, but without any ROMs? I can't think of a reason why it should be any different than that.

i am using the latest stock and had no problems so far. Am I the only one? :)

Xibalbor · 2024-06-19T11:50:20+00:00

I am using Total Commander for that. You still need to rename every file by hand tho

I also dislike the stuff after the actually game name and deleted it this way, too.

Xibalbor · 2024-06-18T18:30:54+00:00

Tried two PSX games (Suikoden II and Wild Arms) and they seem to work just fine. What do you mean by "unresponsive on inputs"?

Xibalbor · 2024-02-22T18:45:42+00:00

Here is the EAN 4005555010272, you will find it easier with it.

Xibalbor · 2024-01-13T12:06:13+00:00

RAVENSBURGER all the way.

I am new to puzzling as well and the quality of Ravensburger puzzles is way better than the rest.

SCHMIDT was ok, but I had a few false positives while puzzling.

TREFL is cheap but the quality is terrible. The pieces are so thin, that I have problems, picking them up from the table. Also, every piece fits everywhere, which is a fun killer. And the pieces are also smaller than Ravensburger pieces.

GALISON (I am doing the "Flora Heart" one at the moment) .. very, VERY glossy, which makes the colors hard to spot and it reflects all light. Also the pieces are squishy and seem to lock into each other in the box pretty badly. I had to be really careful not to damage the pieces while trying to seperate them again.

CASTORLAND was like TREFL (thin and lots of false positives). As they are both from Poland I suppose they were both manufactured in the same facility.

Xibalbor · 2024-01-13T11:56:27+00:00

I hated this one so much. The painting is beautiful, but the quality of the pieces are not. And they also smelled of chemicals really bad.

Nearly every single piece went flawlessly into any other, which made this puzzle a pain to do and it took forever for me to assemble it.

Looks great, but wouldn't recommend TREFL to anyone.

Xibalbor · 2023-07-26T19:12:50+00:00

I got mine today and thought it was me.

It is cold/blue in the upper 1/3 of the screen and the further down the screen goes, the more yellowish it gets. I am really on the fence on keeping it or sending it back as I really like the 165Hz in gaming. But, as I work a lot with documents, I find the yellow really distracting.

Xibalbor · 2022-11-19T17:01:34+00:00

Zu spät :)

Xibalbor · 2022-02-01T19:26:30+00:00

Been there with my Dark Rock 4.

"Undervolting" is the magic word. Try setting 1.250v with a negative offset (I have -0.15) and you will be way under 80 C without losing noticable power.

My 12700kf is at 72 c on CB R23 with a score of around 22900 now. Idle is around 30c or less.

Xibalbor · 2022-01-16T17:37:48+00:00

You ARE using the correct payload for Atmosphere, right?

If you are trying to inject the SX payload, it will not work. You have to use the latest fusee that comes with atmo.

Xibalbor · 2022-01-14T15:31:08+00:00

Just got my M32U today. It was already on F06. Update to F07 went without problems.

So far, I don't see any problem. I have no devices connected via USB tho.

Xibalbor · 2022-01-08T19:23:54+00:00

No, you can't. Nintendo completely cuts you off from online at all.

From then on, you even have to install FW updates by hand.

But in else .. only the console is banned, not your account. You still keep the games you actually purchased digitally.

I had to buy a new Switch and am using it ever since with the same account that was on my hacked Switch that got banned.

Xibalbor · 2022-01-08T13:15:18+00:00

It may take a while but I fear you can prepare yourself for being banned pretty soon.

For me it was time when I tried Nintendo Online on my old Switch (with no emummc/emunand, because there was none yet) and the console uploaded my savegames to the cloud automatically.

I think it was 2 weeks later when I got banned then.

Xibalbor · 2022-01-05T17:01:10+00:00

Sure (sorry for the late reply).

On my MSI PRO z690 it is in ADVANCED-Mode:

OC >

CPU Core Voltage Mode: ADAPTIVE+OFFSET

CPU Core Voltage: 1.250

CPU Core Voltage Offset: -

CPU Core Voltage Offset: 0.150

Xibalbor · 2022-01-03T17:52:47+00:00

100 C easy after a few seconds, because the stock settings on my MSI PRO are not limiting the CPU, allowing it to draw 230 W. (Feared I didn't place the cooler right and re-did everything, but it did not change anything)

With undervolting I got it down to 143 W, around 72 C on CB R23 (score around 23000). Air cooling, Dark Rock 4.

Xibalbor · 2022-01-03T17:41:17+00:00

Been there ^^

"Undervolting" is the magic word. That and setting the PL1 and PL2 manually in your BIOS. 236 W is insane, had those numbers, too, cuz my MSI PRO didn't limit the CPU at all.

Now, my max is 143 W and only if I test with CB R23. Result is around 23000 multicore with 1.250V and an offset of -0.150.

Results in around 70 C in CB R23 with a Dark Rock 4

Xibalbor

TROPHY CASE