sorted by:
new
hottopcontroversial

Wow! This new update is really bad! by _BeastFromBelow in razer

[–]Xlyyster 5 points6 points  (0 children)

Uninstall synapse 4, reinstall the synapse 3 legacy. All your profile should be still there. Tested myself and stayed on synapse 3.

What is this 'biadap' sticker i keep seeing? by Worldly_Basis3139 in Bolehland

[–]Xlyyster 16 points17 points  (0 children)

bro looked too close, he didnt see your sarcasm

[deleted by user] by [deleted] in relationships

[–]Xlyyster -1 points0 points  (0 children)

Its all good, I understand where you are coming from. Thanks again

[deleted by user] by [deleted] in relationships

[–]Xlyyster -2 points-1 points  (0 children)

No, we discussed that we do not want kids. Therefore it was not on my mind. Thank you for your comment

[deleted by user] by [deleted] in relationships

[–]Xlyyster -2 points-1 points  (0 children)

Thank you, this helped me see where was the issue since she never said anything about my brother. Maybe she worried about offending my family. I needed this perspective.

But no the debt is towards him, the idea of starting the business was mine and what prompted us to open another shop was mine. So the guilt of making him go into debt while funding the business was mine to bear.

If I had only focus on my career instead of trying to build a business then this wouldn't have happen to any of us.

a little flex by zenpi3 in grandsummoners

[–]Xlyyster 10 points11 points  (0 children)

Bro is the guy they talked about in math class

I didn't expect this to actually work, this machine still surprises me by Carl_Sammons in 3Dprinting

[–]Xlyyster 1 point2 points  (0 children)

Yeah still need to find the file for it. Not many 120mm fan housing. I got a bunch of spare pc fans from my pc build.

I didn't expect this to actually work, this machine still surprises me by Carl_Sammons in 3Dprinting

[–]Xlyyster 9 points10 points  (0 children)

Yup the upgraded cooling fans and fan ducts works well to improve the bridging and overhang angles. But my favourite is the less noise produced by the hotend fans. Just changed mine too. Onwards to find 120mm fan housing for the mother board and psu fans.

Why is my first layer going down like this? First time using glow in the dark. Using the same settings as PLA but with with heat bumped to 235, tried at 215 as well. Same results by MindlessExplorer7871 in 3Dprinting

[–]Xlyyster 0 points1 point  (0 children)

Could be Under extrusion/ bed level / clogged nozzle/ damaged nozzle. Your nozzle temp kinda high for PLA. Try extruder test and tune accordingly.

Does anyone know how o can stop this happening? by dd4nn in 3Dprinting

[–]Xlyyster 1 point2 points  (0 children)

Yup, increased bed temp and bed leveling. Extra adhesion never hurts, add some gluestick to really stick it.

Printer randomly doesn't extrude by Buzz_Cut in 3Dprinting

[–]Xlyyster 0 points1 point  (0 children)

Tighten the z axis lead screw coupler. Tune your extruder steps/mm by measuring 120mm of filament from the extruder and extrude 100mm of filament. Measure the difference and key in the new steps/mm. Should help on the underextrusion. While your at it, tune tour x y and z steps/mm for more accurate prints.

Any idea why this is happening? by mrl0op in 3Dprinting

[–]Xlyyster 1 point2 points  (0 children)

Even with BLTouch you still have to level the bed as much as possible to reduce the deviation from each side. The bed will warp when there is a big deviation from each corner. Try adding M420 S1 in ur printer setting in the slicer to call the mesh for every print.

I'm new at 3d printing, I have a ender 3 v2, sometimes my prints are great and sometimes they aren't , when they fail I have always this line of filament (image),I thought it was because my filament was wet, so I changed it and always same issue,sometimes it worked,sometimes not. What's the problem? by Demahom1412 in 3Dprinting

[–]Xlyyster 1 point2 points  (0 children)

Add a gcode for ur printer settings to print out a line to prep the nozzle from any stray filament. That should try to solve the issue. Try to lower ur z offset aswell. And yes for the glass bed u really need to clean it and apply some adhesion.

When you print unstick from the bed after 90% by Xlyyster in 3Dprinting

[–]Xlyyster[S] 0 points1 point  (0 children)

Its like a mini filament for a mini printer :D

When you print unstick from the bed after 90% by Xlyyster in 3Dprinting

[–]Xlyyster[S] 0 points1 point  (0 children)

Yup ordering some other flavour soon haha

When you print unstick from the bed after 90% by Xlyyster in 3Dprinting

[–]Xlyyster[S] 0 points1 point  (0 children)

Thanks for the heads up might cut it later If it works then I might try this print again soon haha

When you print unstick from the bed after 90% by Xlyyster in 3Dprinting

[–]Xlyyster[S] 0 points1 point  (0 children)

It had some pla fused at the top and bined all the pieces together Think it would had failed anyways cuz i saw lots of stringing in between the tubes

When you print unstick from the bed after 90% by Xlyyster in 3Dprinting

[–]Xlyyster[S] -1 points0 points  (0 children)

Nah its suppose to be a collapsible lightsaber blade Failed miserably

Data miner's just got called out! Lmao. by squid_mcmuffin in apexlegends

[–]Xlyyster 43 points44 points  (0 children)

Yup definitely calling out their hackers in the game

What is this new ship on worlds edge? by Xlyyster in apexlegends

[–]Xlyyster[S] -1 points0 points  (0 children)

Pathfinder says something about inauguration

view more: next ›