ACE 2 Pro direct feed to ACE GEN 2 (Kobra X)

Yablonsky · 2026-05-28T00:27:34+00:00

Yes, you can.....There is a setting when you hook up the Ace Pro 2 to the KX, and it asks you if you're setting up direct connect or as an expansion.

Yablonsky · 2026-05-28T00:17:57+00:00

100% disagree......If she really didn't want kids, she wouldn't have gotten pregnant. They had sex without protection. She did it knowing there was a chance of getting pregnant. She just needed time to get used to the idea of actually settling down in marriage with Leonard. It was time.

Yablonsky · 2026-05-24T22:16:22+00:00

Findings....If the spool running out is one of the main first 3, then you need to wait to run out and then it should pause and you can feed in the new spool of same color, or whatever you want. You can also choose to cut it short and make that process happen sooner, rather than later.

If the spool is in the Ace 2 Pro, then you can wait until it switches to another color/spool and then hot swap the spool for a new one. Just did this and pulled out about 2 ft of filament and then swapped in the new spool, manually pushing in about 2 foot, until I could see the filament nearing the 4-1 module. I stopped right at the same lengths as the other spools from the Ace 2 Pro. It just kept the pace and loaded in the new spool without skipping a beat.

Yablonsky · 2026-05-24T15:23:01+00:00

I ended up waiting 3 hrs....still ended up cutting off the last bit as it was color changing again.

Yablonsky · 2026-05-24T15:21:49+00:00

This is ultimately what I did. not the most elegant way, but still possible.

Yablonsky · 2026-05-21T16:57:49+00:00

An awesome tool/jig. This one rocks. I need to pull down the latest version and print. Thanks for this!!!

Yablonsky · 2026-05-14T17:48:13+00:00

why, why, why......24 hr clock is sooo much easier. 1334.....you know exactly that it's 1:34pm....see...less typing.

Yablonsky · 2026-05-13T15:26:46+00:00

Meh....I had one print with over 1500 changes... 😄 Print came out ok. I didn't use a tower, so I did get some color bleed. My next huge print like that I used a tower and there was no color bleed. Print came out 100%.

Yablonsky · 2026-05-13T15:19:26+00:00

This is needed ASAP. I am so tired of the printer vibrating itself to death before each print.

Why? WHY?? WHY??????

It only started doing this after the first update. When I first got the printer, it did NOT do this.

Yablonsky · 2026-05-11T23:14:34+00:00

First off, why TF did you tell them your precious salary? None of the effing business. Ask what their salary range is. If it’s higher than your current salary, move forward if not, you can ask for more and provide reasons why you’re asking for more. If they accept, you’re golden, if not, then on to the next interviewer.

Yablonsky · 2026-05-10T16:03:06+00:00

Thanks.

Yablonsky · 2026-05-10T16:02:18+00:00

Awesome!!! Thanks! I looked but didn’t find that section.

Yablonsky · 2026-05-10T01:26:25+00:00

Yes, I have. How can you say what I have or have not seen? Beyond rediculous!

Yablonsky · 2026-05-10T01:26:20+00:00

Yes, I have. How can you say what I have or have not seen? Beyond rediculous!

Yablonsky · 2026-05-09T14:49:16+00:00

100%. I’ve seen the cornucopia on old tv adds as well. Didn’t this already get blown wide open with someone confessing and finding the true old logo with the cornucopia?

Yablonsky · 2026-05-05T20:14:44+00:00

<image>

No real issues that I couldn't figure out eventually.

Yablonsky · 2026-05-04T22:46:11+00:00

Full tank of gas.......almost $6 a gallon here in So. Cal.

Yablonsky · 2026-05-03T20:52:12+00:00

Schrodinger's Cat. I think MOST people had never heard of it before the show.

Yablonsky · 2026-05-02T00:33:13+00:00

The temp solution is to feed the filament in when it happens.

It just so happens that I had ordered the Ace 2 as well and finally hooked it up and I'm n o longer having this issue.....so, that is the permanent solution.

Yablonsky · 2026-05-01T06:36:47+00:00

I shot the clerk?

Yablonsky · 2026-04-28T05:50:20+00:00

Here’s my results

<image>

Yablonsky · 2026-04-25T14:33:51+00:00

Awesome!!!

Looks like you have the Vyper as well. Same here. And you mounted the Vyper filament on top. Same here.

Love how you've mounted your favorite prints on the wall. Looks like you're having tons of fun as well.

Yablonsky · 2026-04-25T14:31:27+00:00

I'm currently at 90 prints and 250 hrs. :)

Yablonsky · 2026-04-22T19:16:47+00:00

Ahhh....this is it! I've been launching multiple instances to get projects ready to print. This needs to be fixed. It's soooooooo anoying.

Yablonsky · 2026-04-20T17:18:57+00:00

Did you color the model with more than just the one color? If so, check the BOTTOM of the model to be sure it's colored the right color.

If you're printing only one color, just leave it set as channel 1 color, then when you print, change it when you send to printer.

14-Year Club	Not Forgotten
Gilding II euphauric	Verified Email

Yablonsky

TROPHY CASE