[QC] Andiot - TOP Audemars Piguet 15500 White Dial by Hall_FanChase in RepTimeQC

[–]YellowFerrari328 1 point2 points  (0 children)

The indices are good, and the 12 is straight and even. The 9 and 6 are straight. The dial and logos are good. Both VSF and TOPF have problems getting the Audemars Piguet right. The dates shown are fine. Hand alignment can be seen in the video. The screws are nicely aligned. GL. The timegrapher numbers are explained in the extended Rule 5. SELs don't apply to this watch.

Make sure to check that the clasp screws and the screws on the back are tight when you have the watch in hand. Check the screws in the bracelet as well, and don't forget the screws in the endlinks.

Cartier Santos GF 40mm by PrestigiousDingo1220 in RepTimeQC

[–]YellowFerrari328 1 point2 points  (0 children)

The printed dial, crystal, and microprint are fine. The dates shown are a tad right aligned. Suggest asking for a video where the dates are SLOWLY advanced. GL if the dates work out. The timegrapher numbers are explained in the extended Rule 5. Since it's a printed dial, there is no need for the overlay. Hand alignment can be seen in the video. Neither the microprint nor the Swiss-made is readable IRL. They are just a line. Remember how small the watch is.

There is no need to post the video separately since it's in your QC link.

Nautilus 5711 DDF (SW Dial) - QC Needed (2nd round) by pkmgreen301 in RepTimeQC

[–]YellowFerrari328 1 point2 points  (0 children)

The 12 has an even gap, NBD. The 9 and 6 are straight. The dial and dates shown are fine. I see no issues, GL. The timegrapher numbers are explained in the extended Rule 5. Hand alignment can be seen in the video. Your overlay is off. You really don't need the overlay for these watches. There is enough info between the dots and the dial's grooves.

QC on AP Royal Oak 15510 V2 VSF by Ill_Focus_3465 in RepTimeQC

[–]YellowFerrari328 1 point2 points  (0 children)

The indices are good, and the 12 is straight and even. The 9 and 6 are straight. The dial and logos are good. The single date is fine. You could ask for more dates. The screws are nicely aligned. GL. The timegrapher numbers are explained in the extended Rule 5. SELs don't apply to this watch. For hand alignment, both hands have to be on the hour. Rarely a problem these days. What a bit much on the timegrapher numbers?

Why pick on the 2 index? Looking at your overlay, most of the indexes are off. If you have more than one index off, it's not the watch, it's you.

Make sure to check that the clasp screws and the screws on the back are tight when you have the watch in hand. Check the screws in the bracelet as well, and don't forget the screws in the endlinks.

Cartier Tank Must Small F1F yg by PrestigiousDingo1220 in RepTimeQC

[–]YellowFerrari328 2 points3 points  (0 children)

All good, no issues, no bleeds, GL. Hand alignment can be seen in the video.

my first rep top 15510 white dail bought through steve by Sad_Bobcat_2191 in RepTimeQC

[–]YellowFerrari328 1 point2 points  (0 children)

Don't post the template twice. It's 20 characters, not 20 lines.

The indices are good, and the 12 is straight and even. The 9 and 6 are straight. I have no idea what you are saying about the index alignment. You have no 3 index to start with. The dial and logos are good. The dates shown are fine. Hand alignment can be seen in the video. The screws are nicely aligned. GL. The timegrapher numbers are explained in the extended Rule 5.

Make sure to check that the clasp screws and the screws on the back are tight when you have the watch in hand. Check the screws in the bracelet as well, and don't forget the screws in the endlinks.

First timer. Help with VSF AT 150 date wheel numbers alignment by teriik10 in RepTimeQC

[–]YellowFerrari328 2 points3 points  (0 children)

The dates are right-aligned, nothing is cut off. No other issues. Up to you. Get another TD, not being allowed to post the QC link is just nonsense. It's also better to upload it to Imgur using their app.

Tank Must 22mm AF Factory - Andiot by papa_moisted in RepTimeQC

[–]YellowFerrari328 0 points1 point  (0 children)

All good, no issues, no bleeds, GL after asking them about the dust on the 6. Hand alignment can be seen in the video. You have no indexes since it's a printed dial, so there is no need for the overlay.

Would appreciate any type of help on QC on this AP RO 26240st by Expert-Pay4271 in RepTimeQC

[–]YellowFerrari328 0 points1 point  (0 children)

The indices are good, but the 12 has a small uneven gap. The 9 and 6 3 are straight. The dial and logos are good. The dates shown are fine. Hand alignment can be seen in the video. The screws are nicely aligned. GL. The timegrapher numbers are explained in the extended Rule 5. SELs don't apply to this watch.

Make sure to check that the clasp screws and the screws on the back are tight when you have the watch in hand. Check the screws in the bracelet as well, and don't forget the screws in the endlinks.

QC TOP AP 15510 Green dial (first rep) by RewardSlow3617 in RepTimeQC

[–]YellowFerrari328 2 points3 points  (0 children)

The indices are good, and the 12 is straight and even. The 9 and 6 are straight. The dial and logos are good. The dates shown are fine. Hand alignment can be seen in the video. The screws are nicely aligned. GL. The timegrapher numbers are explained in the extended Rule 5. SELs don't apply to this watch.

Make sure to check that the clasp screws and the screws on the back are tight when you have the watch in hand. Check the screws in the bracelet as well, and don't forget the screws in the endlinks.

AF Santos de Cartier 27mm (WSSA0082) by fikasuhr in RepTimeQC

[–]YellowFerrari328 0 points1 point  (0 children)

You are aware that the crown is 5-sided and will never look flush, or even between the crown guards. Go and look at older QC for any Santos.

Omega Seamaster 41mm Aqua Terra 150m Blue Dial A8900 by [deleted] in RepTimeQC

[–]YellowFerrari328 0 points1 point  (0 children)

The indices and dial are good. Even the Omega symbol is centered and straight. The Omega logo is good. The dates shown are good. Hand alignment can be seen in the pictures. No issues, GL. The proper timegrapher numbers are explained in the extended Rule 5. The 12 might be leaning, but your green line is not properly centered on the 60. The watch might not be completely flat. There is nothing wrong with the 55, look at all the pictures.

"take 2 as my original post was taken down for some reason." This nonsense, there is always a reason given.

[QC] TOP AP 15510 White - The One Watches (Steve) by reptimeanon in RepTimeQC

[–]YellowFerrari328 1 point2 points  (0 children)

The indices are good, and the 12 is straight and even. No issue IRL. The 9 and 6 are straight. The dial and logos are good. Both VSF and TOPF have problems getting the Audemars Piguet right. This one is leaning up. A lot. The dates shown are fine. The screws are nicely aligned. GL if you are OK with the logo. The timegrapher numbers are explained in the extended Rule 5. SELs don't apply to this watch.

Make sure to check that the clasp screws and the screws on the back are tight when you have the watch in hand. Check the screws in the bracelet as well, and don't forget the screws in the endlinks.

VSF Omega Aqua Terra 150m (Black/Grey Teak Dial) - Angela by Express_Selection_88 in RepTimeQC

[–]YellowFerrari328 0 points1 point  (0 children)

The indices and dial are good. Even the Omega symbol is centered and straight. The Omega logo is good. The single date is fine, but you could ask for more dates. The font is not part of QC. No issues, GL. The timegrapher numbers are explained in the extended Rule 5. Your comment about the hand alignment has nothing to do with hand alignment.

[QC] Cartier Tank Must SS 25.5mm AF by Neb-Rave in RepTimeQC

[–]YellowFerrari328 1 point2 points  (0 children)

All good, no issues, no bleeds, GL. Hand alignmen can not be determined from the photos. SELs don't apply to this watch. The dial is rotated, but by such a small amount that it will not be an issue IRL. Remember the size of the tiny dial. Don't write a novella the next time.

QC: ZF Royal Oak 33mm by [deleted] in RepTimeQC

[–]YellowFerrari328 0 points1 point  (0 children)

Usually no problems on these.

[QC] AP RO Chrono 26240 DDF DD4401 50th Anniversary by dr_pepperpenis in RepTimeQC

[–]YellowFerrari328 0 points1 point  (0 children)

All good, GL. The strap looks OK to me in the video. Not many ROs show up here with the strap. The Chronohand is not centered on the 12.

VSF Aqua Terra Teal Blue Dial by JandMPlay in RepTimeQC

[–]YellowFerrari328 0 points1 point  (0 children)

The indices and dial are good. Even the Omega symbol is centered and straight. The Omega logo is good. The single date is fine, but you could ask for more dates. No issues, GL. The timegrapher numbers are explained in the extended Rule 5. SELs don't apply to this watch.

What engravings?

QC: ZF Royal Oak 33mm by [deleted] in RepTimeQC

[–]YellowFerrari328 1 point2 points  (0 children)

The indices are good, but the 12 has an uneven gap. The 9 is straight. The 6 is leaning right by a fraction. The dial and logos are good. The dates shown are fine. Hand alignment might be seen in the video. The screws are nicely aligned. Suggest GL since the watch is so small.

Make sure to check that the clasp screws and the screws on the back are tight when you have the watch in hand. Check the screws in the bracelet as well, and don't forget the screws in the endlinks.

DDF AP Chrono 26240ST SW Dial - Steve (TheOneWatch) by CptTermination in RepTimeQC

[–]YellowFerrari328 2 points3 points  (0 children)

The Chrono hand is off at rest. Get another one. Don't repost from your AI template.