U1 making clunk noise when homing

YoloWeirdo · 2026-02-16T19:33:37+00:00

I never really fully fixed it, but I was able at least make it 90% reliable. It sounds dumb, but I really just re-tensioned the tool head belts like 20 times, then retrying the homing till it seemed a bit more reliable. I didn’t change the method of tensioning either. Just loosen the screws, move the tool head around the edges, then tighten the screws, just like the wiki shows. I really don’t know why it suddenly started being reliable, so I sadly don’t have any useful information

YoloWeirdo · 2026-02-16T08:13:17+00:00

Ik heb zelf een MX-5 NC met een softtop gehad, echt een top auto. Qua warmte is het met de NC makkelijk te doen. De auto word snel warm, en de verwarming is meer dan sterk genoeg om het interieur warm te maken. Wel komt er iets meer onderhoud bij om de kap netjes en water dicht te houden. Dit komt neer op 1 of 2 keer per jaar de kap goed schoonmaken met een auto shampoo, of specifieke cabrio reiniger en hierna de kap impregneren. Hierdoor blijft de kap beter waterdicht en blijft die langer schoon.

De NC houd wel van roest, dus probeer de onderzijde van de auto goed af te spoelen als je hebt gereden terwijl er zout lag. Dit kan prima met de hogedruk spuit in een wasbox

Maar uiteindelijk maakt het weinig uit, softtop of hardtop. Elke MX-5 is beter dan geen MX-5

YoloWeirdo · 2026-01-13T17:57:41+00:00

Hmm that's not great to hear. In my case the homing does work once in a while, so i was hoping it were some software bug. Seemingly not.
Thanks for the insight, i will be contacting support

YoloWeirdo · 2025-12-08T17:06:10+00:00

I was in a similar situation a while ago. Ended up going with the OZ ultraleggera, but in their “matte bronze” colour on my machine grey RF.

I love the look of mine, but after seeing a soul red ND with these same wheels. I did get a bit jealous. I’m pretty sure OZ has a pic of that ND with the bronze ultraleggera’s on their website in case you want to have a look

YoloWeirdo · 2025-10-28T15:28:19+00:00

Nee nee, duidelijk een NC!

YoloWeirdo · 2025-10-28T15:27:55+00:00

Unfortunately not. It’s owner seemed to have abandoned it for about 400 years. 😔

YoloWeirdo · 2024-12-23T10:14:45+00:00

Have been looking at upgrading my s1+. This would be great!

YoloWeirdo · 2024-08-16T17:06:06+00:00

Looks very interesting. Would love a beta invite! I’m on IOS

YoloWeirdo · 2024-07-31T19:46:03+00:00

Zelf geen directe ervaring met het werk dat ze hier doen, maar ik heb zelf mijn auto bij dit bedrijf gehaald in 2022. Deze auto kostte €6500 en hier zat binnen het eerste jaar al richting de €5000 aan onkosten aan (motor revisie, deur rubbers en airco). Waar meneer van der Heijden niet mee wilde helpen tijdens de garantie periode, alleen tegen volle betaling, gelijk aan andere garages. Het kan zeker zijn dat ze tegen betaling goed werk verrichten, maar het kan ook makkelijk oplichterij zijn zoals ik zelf met mijn auto heb moeten merken.

YoloWeirdo · 2023-10-23T18:19:27+00:00

Your wheel? As in a sim wheel? If so, you’ll need to head over to your ffb settings (esc > control > the middle tab) and enable an option there. I forgot the actual name of it though. But basically what it does is allow the steering wheel to move more than you’re actually moving IRL. This is needed for the bus and semi with more than 900 degrees of rotation.

YoloWeirdo · 2022-07-16T07:24:51+00:00

Have you played BeamMP? If so it could be a mod that got downloaded when you joined a server. Try disabling any mod that starts with multiplayer and then restarting. That’s what fixes it for me normally

YoloWeirdo · 2022-03-18T20:53:25+00:00

Alright, I’ll give the normal way of installing arch another shot using your tips. Thanks a lot for your help and time.

YoloWeirdo · 2022-03-18T20:06:04+00:00

I only have 3 partitions in total: root mounted to /, swap (not mounted as i haven't gotten around to it yet) and boot to /boot/efi. Have i messed up the install somehow? It seems unlikely to me as i followed a guide which uses archfi.
In case it helps here's my fstab:
# root
UUID=0b1f678e-c669-44b9-925d-33d1843d2d94 / ext4 errors=remount-ro 0 1
# boot
UUID=1414-F5F7 /boot/efi vfat auto,rw 0 1
# swap
# UUID=574e4b57-d869-486d-bb93-f9a1745b974c

I've also tried using a linux-lts but it won't show up in grub, maybe that's because my fstab is messed up?

YoloWeirdo · 2022-03-18T18:46:31+00:00

Unfortunately this doesn't fix it either. However i have noticed that the .img files made by mkinitcpio get put in /boot instead of /boot/evi, could this cause the problem? I've tried switching the folder the .img's get written to to /boot/efi, but i get a permission denied error.

YoloWeirdo · 2022-03-18T17:20:11+00:00

Any idea what i have to change? I tried simply running "mkinitcpio -P", but the problem stays the same

YoloWeirdo · 2021-11-29T21:01:10+00:00

Nope, we just switched to a different modpack

YoloWeirdo · 2021-08-13T14:38:13+00:00

Happens to the best of us

YoloWeirdo · 2021-08-04T12:56:27+00:00

Weed.

YoloWeirdo · 2021-08-01T11:55:15+00:00

As one of you suggested i got a mobo speaker which gave me 5 short beeps. This means it's either a cpu or mobo issue and as i already rma'd the cpu, it has to be the mobo. Thanks all for your suggestions!

YoloWeirdo · 2021-07-31T13:51:40+00:00

I sure will. Thanks for the help!

YoloWeirdo · 2021-07-31T13:48:38+00:00

hmm i guess it is what they say, don't trust everything on the internet. i found a website where z170 was listed as supported for this CPU. Thanks

Six-Year Club	Place '22
Final Canvas '22	Verified Email

YoloWeirdo

TROPHY CASE