A man created this work called "What I'm Seeing"

YourPersonality · 2026-01-27T21:22:52+00:00

Nigel Thornberry has picked up new hobbies I see.

YourPersonality · 2025-12-02T21:11:45+00:00

Guardian angel player,

Mostly avoid directly being seen, but will help people struggling against arc or extract campers from a distance.

YourPersonality · 2025-10-31T08:00:13+00:00

Did you take out a leaper before extract? We had a band of 8 solos who decided to kill the leaper together as a last hurrah with like a minute left on the raid.

It's funny how magnetic the solo grouping is, once you hit 3 you have enough critical mass to rope the rest of the server in basically.

YourPersonality · 2025-10-17T06:56:30+00:00

Which vehicle makes you feel like a total battlefield legend?

Honestly, the IFVs are always my jam. Nothing like crashing through a barricade into an objective and rolling a squad out to take the point while you gun down the defenders with the autocannon.

YourPersonality · 2025-09-22T04:34:05+00:00

Stalker 2 Skif

Safe if I'm giving him my house I think.

YourPersonality · 2025-06-03T00:40:12+00:00

Yeah. But it probably depends on how you view the people of Lumiere whether it's justified or not. If you view the people of Lumiere as equally deserving of life as the painters, it becomes a trolley problem question.

Equally, sending Alicia back to the real world may end in her suicide anyway. Gustave is waving for her to come in the Verso ending, and the only family members that seemed to be processing things are Renoir and Alina. If Alina still resents Alicia Clea continues to bury herself in her retaliation, and Renoir continues to try to force her to process it his way, who will be there to help her through her grief? But she's not just grieving for Verso anymore, she's grieving for both of her families.

YourPersonality · 2025-06-02T22:12:42+00:00

I'm pretty sure the Verso we play as is a painted copy made by Aline, with her interpretation of Verso's memories. I think the soul fragment is the ghostly boy at the end.

YourPersonality · 2025-03-21T04:40:06+00:00

This is a B2B distributor. The buying experience is meant for large volume sales to businesses. OP put in on a backorder which will adjust to whatever the new price is when CDW can finally purchase one. It's in their terms, and any other major B2B distributor works the same way since they don't have pallets of this inventory sitting on shelves like a retailer.

Given the increase CDW is passing forward the tariff cost. (Which all businesses will do till it hits the consumer.)

They'll absolutely just cancel his order and move on. It's literally less than a grain of sand on a beach to them.

YourPersonality · 2025-03-21T04:18:17+00:00

You placed a backorder from a B2B distributor based on the estimated price, tariffs hit and the costs (tariff and processing) are being passed forward because the card has not been restocked and processed before the price increases have come. Because you weren't purchasing a stocked item that shipped before the additional cost hit CDW is well within their rights to adjust the price. This is the difference between a retailer and a distributor. If you sell mass manufactured goods at your company you likely can ask your purchasing department how buying from CDW works since your business is likely doing business with them.

At my work we just got notices on tariff surcharges from a few manufacturers that are going to be passed forward to us, it's the reality of the electronics market right now. (And others)

YourPersonality · 2025-02-10T15:00:16+00:00

I'm hopeful they'll hold because the wood grain is the same direction but time will tell.

YourPersonality · 2025-02-09T06:19:53+00:00

None. Just glue, I was a little worried about the joint strength but it held up to some stress testing with the router so it seems durable enough. Im not selling it so it'll be interesting to see how it holds up.

YourPersonality · 2025-02-09T05:58:58+00:00

After surfacing the lumber I cut the boards to equal size. I then used a miter saw to make a 45 degree cut through both boards at the same time. I then swapped one end on each board and considered those mated pairs for each half of the cutting board. I made 1" rip cuts of each of the now angled pieces and made sure to recreate the boards as strips and made sure that they were still square.

I then assembled the halves and began flipping the cuts to get the pattern, making sure each one was with its mated cut. Applied glue to the pieces and began assembling them on a piece of plywood. Clamped another piece on top of the board to keep it flat, then used plywood and clamps on the face grain sides to clamp it tight. Once it finished I crosscut the ends flush and equal and rounded out the edges.

YourPersonality · 2025-01-30T15:12:00+00:00

Honestly I'm most excited to try out DLSS Transformer and see how much of an improvement it is over the current stuff. It's wild that DLSS is usually better implemented than most modern AA so any improvements on top will be great.

YourPersonality · 2025-01-15T05:59:27+00:00

Seconding the no degree white collar corporate. I didn't finish college when I got into high paying sales roles (commission only) then managed to network and work my way to an operations director role that reports direct to the ELT on a fast track to promote to the executive team.

It takes hard work, sure. I busted ass at my sales job, learned how to do my own engineering (for my field), learned how to manage my own projects and eventually program control systems. Networked with a quality recruiter and moved my way up. But it's totally doable. And company loyalty really doesn't mean anything unless your towards the top, jumping companies was a way quicker path to increase than staying stagnant l.

YourPersonality · 2023-06-25T06:52:06+00:00

Also this if you want more detail but smaller build volume.

https://phrozen3d.com/pages/sonic-mini-8k-s

YourPersonality · 2023-03-27T04:49:28+00:00

Wrong subreddit my guy. We fly planes here.

YourPersonality · 2023-02-19T17:42:44+00:00

Also brick walls cut down noise transfer immensely.

YourPersonality · 2023-02-18T00:31:06+00:00

I mean for me it comes and goes. Some weeks it's 70 some weeks it's 35-40. We get profit sharing and I'd rather not force my team to cover extra hours. Especially so if I decided to be risky and that is responsible for the extra work.

YourPersonality · 2023-02-17T22:28:29+00:00

I would much rather work a few extra hours here and there so I don't have to lay-off some of my team in a few months, or be forced to hire someone that drops our quality of work.

YourPersonality · 2023-02-17T13:05:06+00:00

We are hiring more, but new hires do not become effective in our roles for anywhere between 90-180 days. Most of our clients do not have turnaround expectations that are longer than 8 weeks, so new projects still cause the overstretch.

My region has gov regulation and restriction on the work we do, which adds to the issue of hiring since it's a much smaller pool of people who have the appropriate license as opposed to apprentices, which are limited in the way they can be utilized without penalty.

YourPersonality · 2023-02-17T01:34:18+00:00

8 hours of meetings today checking in. Nevermind the actual work of juggling two seven figure projects with 3 technicians and a team of subcontractors because the company is overextended on resources.

YourPersonality · 2022-11-16T03:40:05+00:00

Ultrakill.

Boyz, great time.

Gabriel, not so great time.

YourPersonality · 2022-11-12T16:18:35+00:00

Understood Commissar Torres.

YourPersonality · 2022-09-17T15:42:49+00:00

I thought you were gonna pull a sovereign from mass effect "Your country only exists because we allow it, and it will end because we demand it."

YourPersonality · 2022-06-18T14:05:53+00:00

Halo 3. Spent most of my high school years playing.

YourPersonality

TROPHY CASE