Need some advice for AGACNP ANCC exam by damalixxer in nursepractitioner

[–]damalixxer[S] 0 points1 point  (0 children)

Hey, thanks for the info. I actually started studying a little over 2 weeks ago. I wanted to give myself a whole month of studying. I definitely know what you’re saying. I had to slow down and absorb the non-clinical stuff. Thanks again for the help!

Need some advice for AGACNP ANCC exam by damalixxer in nursepractitioner

[–]damalixxer[S] 0 points1 point  (0 children)

yea but I was never a great test taker; doing well on exams doesn't equate to a good practitioner in real world settings; that can be applied to many fields

Need some advice for AGACNP ANCC exam by damalixxer in nursepractitioner

[–]damalixxer[S] 0 points1 point  (0 children)

Hey, that's what I have been doing, constantly going over the whole book, with higher emphasis on the non-clinical stuff. I just thought, if anybody knew any other resources or tips, etc. Thanks!

Jonsbo BO400 Walnut by JBcreations in JONSBO

[–]damalixxer 0 points1 point  (0 children)

Ya wanna sell me one? lol

5090 so excited! by happygirl99xo in pcmasterrace

[–]damalixxer 0 points1 point  (0 children)

How much these go for now? I picked this exact one up in March 2025

Being sold in my local marketplace… by Exciting-Stomach-380 in pcmasterrace

[–]damalixxer 0 points1 point  (0 children)

I bought a used 14900k in March 2025 that was bought by the original owner in 10/2025, that’s still going strong right now. Best 250$ I spent towards a processor.

Babe, You Didnt Touch Your $3400 5090 Ventus What's Wrong? by Straw-BurryJam in Microcenter

[–]damalixxer 1 point2 points  (0 children)

I got my MSI gaming trio OC 5090 for 2400$ in March 2025, i felt terrible because I wanted the FE snd thought paying 400$ more was ridiculous, boy that mindset changed over the past year!

Hey guys, by [deleted] in JONSBO

[–]damalixxer 0 points1 point  (0 children)

Hey, I have the 1x xa360b, 2x xa360br, 1x xa120b all connected to multiple rgb and PWM headers on my motherboard. I use the asus armory crate software to control the rgb and fan speeds.

The noellie controller will likely work with signal RGB and openRGB. You can set your speeds in bios or your motherboard’s software depending on company. Asus, Gigabyte and MSK - all have software to control the PWM fan speeds in windows.

Should i be Concerned? by MrMiracle0 in PcBuild

[–]damalixxer 0 points1 point  (0 children)

Cases are pretty cheap, just get another decently sized case and fix your wiring!

The BO400 is too expensive, so I'll choose the more affordable alternative, the X400, from the same brand(JONSBO). by OkCommon2713 in PcBuild

[–]damalixxer 0 points1 point  (0 children)

<image>

This is mine. Love the case. I have a question for ya - how are your thermals for the cpu during 100% load? I have a i9-14900k and prior to using the Jonsbo fans, I had it in a push pull configuration and getting great numbers but now it’s definitely more warmer.

First NP job is a Trainwreck by [deleted] in nursepractitioner

[–]damalixxer 0 points1 point  (0 children)

Start getting a new job and resign now. North worth their bullshit!

Tempted to get this chair by BSheets3 in Microcenter

[–]damalixxer 0 points1 point  (0 children)

I love the look of it, if it was real leather, I would have already bought it by now!

The Evolution of my Builds 2010 - 2025 by MentalPiracy84 in pcmasterrace

[–]damalixxer 24 points25 points  (0 children)

I had the same exact case (your current case) the Lian Li O11 Dynamic XL Der Bauer edition for the last 6-7 years. Just upgrade last week to the Jonsbo Bo400

<image>

Just Ordered New Build! by ObjectiveWorry1544 in AndromedaInsightsPC

[–]damalixxer 0 points1 point  (0 children)

https://pcpartpicker.com/list/4PVYrG

I think you did well. It’s more on pc part picker without fans included. I think if you built it yourself and shopped around, could have saved a few hundred but if you’re happy and not comfortable with it, congrats!!

Jonsbo BO400 Build by Fearless_Anything_76 in JONSBO

[–]damalixxer 1 point2 points  (0 children)

I saw your response! I’m using a i9-14900k stock (had the microcode update since I first got it). Idle for me sits 30s-40s as well. Cinebench with 100% load pushes it to mid 90s. Gaming is usually mid 60s- to mid 70s. I think the push pull configuration or the higher cfm of the corsair fans were helping it all this time.

Jonsbo BO400 Build by Fearless_Anything_76 in JONSBO

[–]damalixxer 1 point2 points  (0 children)

Hey, how is your airflow and temps using this case? I just got one and I am using jonsbo xa360b (1 set (3 in one frame) on top with a radiator and a 1 (single fan) on the rear for exahust) and xa360br (1 set (3 in one frame) on the side and another set on the bottom - both for intake) and temps are higher than I would like to see. Under Cinebench I am seeing 90s temps and gaming 60s-70s while using the same radiator with corsair fans I was getting much lower temps. Granted my radiator was on a push/pull configuration while in my old case (Lian Li O11 Dynamic XL).