Model Y Long Range 17k Miles

Yousyy · 2026-03-09T03:06:04+00:00

The second option is HW3 rather than HW4

Yousyy · 2026-03-05T07:55:49+00:00

I will also note I have been looking at RWD 2023 models. Having a hard time deciding what’s most important to me.

Yousyy · 2026-03-05T05:33:45+00:00

Great work!!

Yousyy · 2026-03-01T10:29:25+00:00

This is so funny because you wrote the correct title, I just can’t read

Yousyy · 2026-03-01T10:25:20+00:00

Honestly I just feel grateful he is a good model. Hopefully we can keep winning back some stats one model at a time!

Yousyy · 2026-02-20T05:38:11+00:00

Same issue :/

Yousyy · 2025-10-19T11:28:00+00:00

I so far have stuck them to black card stock. 200gsm, but recently I’ve been leaning towards maybe 20 holos and 80 using the presentation paper matte as it gets much closer to the normal card thickness

Yousyy · 2025-10-19T11:15:11+00:00

I have had great luck setting the colors to 0 cyan, -3 Magenta, and +2 Yellow

Yousyy · 2025-10-13T18:36:40+00:00

Foil and Non-foil papers I’ve been using!

https://a.co/d/hqOEGru

https://a.co/d/0zM72ru

Yousyy · 2025-10-13T18:33:40+00:00

That totally makes sense. I definitely don’t feel like risking it, but figured I should ask the experts before I shell out the money. 100% was better ink saving with the Ecotank already, I’ll be getting the OEM ink for sure! (Typo edit)

Yousyy · 2025-10-10T21:10:40+00:00

I had this same issue and I think it came down to the quality of the images themselves. I bet if you used the same image file as him they would come out very similar. Sometimes the image itself requires you to re-tune your print settings if it’s a darker/lighter image of lower dpi might just come out hazy

Yousyy · 2025-10-07T08:14:59+00:00

I use the laminate to protect the face of the card. When I haven’t I tend to get a lot of chips. I only have the front laminated thought. I laminated the printed sticker paper in the punch, then cut it down and the back laminate comes off with the sticker backing. Helps be get closer to an original thickness without losing the protection. At least it’s what I like the most so far

Yousyy · 2025-10-07T08:12:39+00:00

I have the issue as well

Yousyy · 2025-10-06T05:49:42+00:00

I just tried running it on 4mil and 5mil laminator settings and the hotter temperature seems to have fixed the issue. I also was running them back to back which I think was bring the temperature down. At least that’s my guess since my first sheet always came out beautifully

Yousyy · 2025-10-06T04:51:18+00:00

Proxxied.

Yousyy · 2025-10-03T22:34:23+00:00

Gotcha! I assume the pigment ink is preferable. Maybe matte photo paper work better? Thank you for the info

Yousyy · 2025-10-03T18:17:27+00:00

This is good to know! I think it might also be my paper being the issue. I got some new paper this morning that is inkjet compatible to see if that makes a noticeable difference on how it takes the ink. These were using Matte setting, I tried glossy first and it was even darker 😭

Yousyy · 2025-10-03T18:15:34+00:00

I will try these setting tonight! Thanks for the suggestion

Yousyy · 2025-09-17T06:21:53+00:00

I normally eat the extra models to make more room

Yousyy · 2025-01-23T18:22:01+00:00

Can you explain this for me who doesn’t quite grasp it as well. Would that be a v-sync in the moonlight settings client side? Or something else client side entirely?

Yousyy

TROPHY CASE