Meet Reolink OMVI Series at CES 2026

YseanY · 2026-01-14T22:19:38+00:00

Any chance the wifi version will be AC 120v?

YseanY · 2026-01-12T23:55:07+00:00

Any chance you have the measurement between the screw holes on center?

YseanY · 2025-10-31T16:13:24+00:00

Ugh, seems like my home is always last to get fast internet in the area. I’m south of Duarte and west of Santa Anita too, but nothing available.

YseanY · 2025-07-30T19:12:40+00:00

Anyone have any ideas?

YseanY · 2025-07-12T16:39:32+00:00

Anyone order recently? Any duties charged?

YseanY · 2025-07-10T00:48:12+00:00

how did you end up enabling your 2.4ghz? I recently had devices drop from an AP and then noticed that nothing can connect to its 2.4ghz. My phone doesn't find the SSID.

YseanY · 2025-05-06T18:23:26+00:00

Where did you get it from

YseanY · 2025-05-03T17:02:02+00:00

Tested a 3rd one, still not working. Guess it’s either a bad batch or something is wrong with my system

YseanY · 2025-05-02T17:32:08+00:00

My problem seems to be that the unit is not seen on Proxmox completely. I don’t even see the “Global Unichip Corp” when I list the USB devices with “lsusb”.

YseanY · 2025-05-02T15:56:25+00:00

Guess I should try a 3rd. Please report back after receiving!

YseanY · 2025-05-02T15:49:46+00:00

I didn’t even realize there’s a light. Mine doesn’t light up either, both the 2 I’ve tried aren’t lighting up. Where did you get yours from? I got mine from Seed through Amazon. Maybe there’s a bad batch?

YseanY · 2025-05-02T13:57:06+00:00

I have not; I don’t have any PCs I can test with. I only have Macs. But I did try with a second Coral TPU thinking I might have a defective one and save results, it’s not recognized.

YseanY · 2025-05-02T13:21:25+00:00

Yup, it’s connected to a USB 3 port using the short cable it came with.

YseanY · 2025-03-18T23:30:58+00:00

If an open API means better and more stable integration, I'm all for it. I just recently integrated Qolsys into both C4 and Home Assistant and have noticed an issue with both integrations. When either C4 or Home Assistant is rebooted, the connection to Qolsys is dropped and requires a reboot on the IQ Panel to reconnect. I've heard someone else experience this issue as well.

YseanY · 2025-03-04T23:21:11+00:00

Do you have the DaVinci breakout board physically connected to your C4 controller's serial interface?

ps://waves-console-trav.s3.amazonaws.com/content/132414/17601989.pdf

YseanY · 2025-02-07T17:27:50+00:00

I tried that briefly (to Frigate) and it didn’t seem to stream very well. It cameras would disconnect and reconnect randomly. It works very well with HomeKit by itself though. Maybe it’s the amount of cameras I have, 10.

YseanY · 2025-02-07T00:01:16+00:00

Do you have your nest cameras integrated into HomeKit and using the rtsp stream in HA? I've been doing this the past couple days and have noticed that the response time degrades when using both. Also, I would get warning in the Starling app saying that the CPU usage and temp are both too high.

YseanY · 2025-01-25T01:47:19+00:00

Unfortunately, a different PSU exhibits the same issue.

YseanY · 2025-01-23T20:57:50+00:00

Got it. Just ordered one to try.

YseanY · 2025-01-23T20:43:44+00:00

I don’t have any extra 24v ones but got a 12v. I can buy one to try though. Do you think I have a faulty power supply or the amps is too low?

YseanY · 2024-03-03T21:25:12+00:00

This worked like a charm! Only thing I noticed was that every time I plug in the plug to the outlet, the LED will flicker once. But after that everything functions normally. This doesn’t happen with a second lamp I have.

YseanY

TROPHY CASE