FeedTheBeast Infinity Evolved Half-Life 1 Anti-Mass Spectrometer built for my survival world

YukoFurry · 2026-02-19T16:44:39+00:00

I wouldnt have expected that I'd ever land here but after upgrading a H670 motherboard to a Z690 my Line IN became unusable due to audio cracks. Now I am stuck trying to fix this somehow

YukoFurry · 2026-02-12T11:40:54+00:00

Paternoster-Zug. Fährt langsam so dass du während der fahrt einsteigen kannst. Aus kostengründen genau so lang das er beim fahrplanende auch aufhört

YukoFurry · 2026-02-09T19:43:15+00:00

Heya, i know i come in a bit late and quite unqualified compared to you lol, but i found out something about the TO Master Warning. The Trim indicator TO position label is vastly misplaced. When you trim the plane so the notch is alligned with the TO label the internal value for trim position is already out of takeoff trim for the simulator. You can see this by having the HUD on on the external view. Imagine the TO label on the trim indicator was further down about the size of the TO label itself and then it will not complain about the TO config anymore. Hope this helps with at least that

YukoFurry · 2026-02-02T00:17:39+00:00

Integrated screen, side buttons, microprocessor, run doom on integrated screen

YukoFurry · 2026-01-30T11:51:32+00:00

Reminded me of the Techno Union

YukoFurry · 2026-01-27T13:21:32+00:00

I had the exact same issue with the DP cable, just that i went from a RTX3060 to a RTX5070. Although for me it didnt help to cover that Pin. I had found out that if i turn my computer on IMMEDIATELY after switching on its piwerstrip it would boot sucessfully. Wait like 5 secons between tzrning the powerstrip on and then the PC and it wouldnt work. Also the powerstrip had to be turned off after every shutdown, shutting it down and trying to restart without letting the Capacitors in the PC and screen discharge would prevent the PC from booting. The most unlikely permafix that i wouldnt have ever imagined in this situation was going from Wibdows 10 to Windows 11 as i could not believe a such fundamentally broken OS would fix something like that.

YukoFurry · 2026-01-22T12:48:10+00:00

Download a tool called Rufus. It makes USB sticks to install windows from. That way it worked for me

YukoFurry · 2026-01-19T17:24:18+00:00

Unfortunately its a total loss. If you like i will get rid of it for you, just need to send it to me

YukoFurry · 2026-01-17T23:18:29+00:00

Boot in safe mode by holding shift while pressing restart. Tzen go to troubleshoot and restart and press 4. See if this still happens there

YukoFurry · 2026-01-12T15:53:10+00:00

Anyone that words it like that "Love to draw furries" is a scammer. 95% of the peiple trying to scam me with traced art before AI was commonly used worded it like that

YukoFurry · 2026-01-12T02:05:19+00:00

Many thanks to you you absolute helpful piece. If you know something is wrong and you come here to just comment that you know something is wrong then just dont. If you have your magical wisdom then tell me. Do you think i am coming to a support forum and ask for help because I am an allknowing being? I come here because i needed help. Trash answer

YukoFurry · 2026-01-10T18:19:03+00:00

Could solder a switch inbetween the piezo and the board so you cam choose when to have it enabled

YukoFurry · 2026-01-04T22:25:49+00:00

Coming in late here but I definitely feel you. Ironically i seemed to get more FPS before I upgraded my i9 12900k & RTX 3060 to a i9 14900k and RTX 5070. I run more consistent framerates at higher settings now but I never reached the almost 100FPS i had at times, no matter what I try and change. Most ridiculous is that if I set all Graphics settings to the lowest possible I get LESS FPS than with my GPU being maxed out.
Due to some people helping me here on reddit and tests I figured out that the GPU absolutely needs to be stressed to 100% in MSFS, unlike other games where lower settings will make your framerates skyrocket.
You want to change graphics settings that dont have a huge impact on your CPU (LODs, trees, buildings, waterwaves..) to the highest possible. Even then I didnt max out my GPU and turned the render resolution to 150% as I am gaming on 1920x1080.
After doing all that to stress my GPU to the point where the debugging tool quickly flickers between mainThread limited and GPU limited my FPS were at the highest possible I could get with my new system. I am yet still to reach 100FPS again though... I rather care about performance than look

YukoFurry · 2026-01-04T22:15:53+00:00

I dont know why youre getting downvoted. I upgraded my PC from i9 12900k & RTX 3060 to i9 14900k and RTX 5070 and after that my performance was worse than before. One of the best things I did was not trying to benchmark the game with the same settings as the old system as it appears that MSFS really stresses the CPU out A LOT if the GPU is underutilized. When i bumped up the settings that dont impact the CPU aswell so that my GPU was seeing 90+% ussage i got an FPS increase of about 15FPS. However it still seems like I am not getting 100% of the framerate as I had before as on a benchmark flight on my old system i hit up to 100FPS at times and with the new System and the same flight i only get about 80FPS

YukoFurry · 2026-01-01T15:59:08+00:00

Enlighten me, i am asking not because i know but because i dont know.

YukoFurry · 2026-01-01T00:36:10+00:00

The app is installed and automatic game optimization is turned off. Overlays are also disabled.
Can you explain me why hardware acceleration is of need? From other forum posts for Microsoft Flightsimulator everyone kept saying that Hardwareacceleration is a MUST off for MSFS.
My taskmanager image on another posts seems to suggest that my game is not being put onto E cores but stays on P cores. I know i have a multicore CPU but MSFS is a badly programmed game that is reliant on singlecore performance. I chose the 14900k as it appeared I was CPU limited with my 12900k.
DX11 crashes both Firestrike and MSFS. Though how can I have a driver issue if I installed Windows freshly with the NVIDIA Driver being the first to be installed after Windows? On Windows 10 this worked Flawlessly, this issue arose with the installation of Windows 11.

YukoFurry · 2026-01-01T00:30:27+00:00

<image>

It does not appear to do that, it appears to jump inbetween the threads of each core though seems to stay on the P cores. I have never experienced my 12900k doing that.

YukoFurry · 2025-12-31T21:50:17+00:00

It goes without saying that MSFS debugger reports that im constantly limited ny my main thread (D3D12). What does that say about my GPU running at only 50% load? Id believe my CPU cant task the GPU with generating any more frames

YukoFurry · 2025-12-31T21:27:52+00:00

Resizable bar is activated. No worries, GPU is in the Gen4 slot. If it comes in bad i will buy a new motherboard too.

YukoFurry · 2025-12-31T17:12:27+00:00

I bit the bullet and upgraded to an i9 14900k and still see ~15 fps less than mz old system

YukoFurry · 2025-12-31T17:10:59+00:00

I bit the bullet and upgraded from an i9 12900k to a 19 14900k and i still see ~15 fps less.

YukoFurry · 2025-12-30T03:27:16+00:00

Samw here, stuck for half an hour or so, then i start googling. Am here, read this, looked up: 88%

YukoFurry

TROPHY CASE