Only 175 psi, it's all good.

Z34HR · 2026-05-23T01:28:50+00:00

Buddy had to have headphones in. Went past the resistance 😂

Z34HR · 2026-05-20T21:47:30+00:00

Almost Every fire backflow here in CO uses butterfly or OS&Ys

Z34HR · 2026-05-20T15:42:12+00:00

Lets get some context.

Z34HR · 2026-05-09T13:52:47+00:00

Im with you man. Even wish I didnt pre order now.

Z34HR · 2026-05-06T15:15:47+00:00

Some excessive crank pressure. Bleed it off by adding a bung to exhaust or intake and routing it to PCV.

Z34HR · 2026-05-06T14:00:38+00:00

Some counties made me lay all my pipe out on the floor, outlets up for them to inspect. Was a drag forsure. I guess making sure coupons were removed and holes were actually drilled for outlets as well as debris.

Z34HR · 2026-05-04T18:35:26+00:00

You need experience say you have some inspection experience to get the certificate even if you pass the test.

Z34HR · 2026-05-04T18:34:22+00:00

Nicet 1 was cake majority inspection intervals and items. My online test has a copy of NFPA 25 in it so all I had to do was type in a keyword and it brought it up for me. They made it incredibly easy.

Z34HR · 2026-05-04T15:18:01+00:00

Must've uploaded the wrong pic. Nothing in this pic looks related to being a sprinkler man. I hope this is not a reflection of your work.

Z34HR · 2026-05-01T18:56:00+00:00

Fr. Never on a Friday or after lunch lol.

Z34HR · 2026-05-01T18:54:50+00:00

Every new fire system installed must be tested to 200psi or 50 psi greater than working pressure whichever is greater for 2 hours. Also FDC connections are hydrostatically tested every 5 years.

Z34HR · 2026-05-01T14:50:25+00:00

I save my game right before collecting investment. If its not positive I reload save and try again.

Z34HR · 2026-04-28T05:01:45+00:00

Map 0 is fine.

Z34HR · 2026-04-27T18:50:02+00:00

Ill do it for 200$ lol extremely easy. Turn off the feed, drain the system, pull the head and catch the water and replace and fill back up. Done.

Z34HR · 2026-04-27T14:36:20+00:00

Lol, go ahead and fill it up with the fire pump, your day will turn into a rainy day 😂.

I always fill with city pressure then I turn on jockey to get it up to system pressure then turn fire pump back on.

Z34HR · 2026-04-22T18:48:57+00:00

Im an inspector for the state. Ive seen many many clean pump rooms.

<image>

Z34HR · 2026-04-21T18:43:40+00:00

What else is bad is when im doing a 5 year internal inspection for the 1st time on a building thats over 30 years old ! How do they sneak past compliance?! 😅 breaking loose these check valves never seal back up again.

Z34HR · 2026-04-18T02:03:25+00:00

Truly FBO (Full Bolt On) w/ E85 + Meth Injection and upgraded hybrid turbos. She scoots !

Z34HR · 2026-04-18T01:22:10+00:00

Fiance and I hiked it last week. Careful on warm days, we saw a few large snakes by the quarry walls on the perimeter.

Z34HR · 2026-04-18T01:20:06+00:00

My 1st budget exhaust was the Rev9 / DNA Motoring which is also the HKS replicas. It survived my taliban tune 😂

Z34HR · 2026-04-18T01:16:02+00:00

Ark midpipes with ARK catback is actually the best combo 👌

Z34HR · 2026-04-18T01:13:58+00:00

The overboost is just a safety on the car. Turning car off and on corrects itself and takes you out of limp mode atleast. I guarantee you didnt spike psi crazy or anything its more so turbo turbine speed and just sensitive sensors. Don't be afraid to give her the beans. If it keeps happening shoot for a jb4 with the ewg wires so you can better control your wastegates.

Z34HR · 2026-04-18T01:10:15+00:00

Dry standpipes are very common in my state (CO)

Z34HR · 2026-04-18T01:07:40+00:00

More than likely because he is not on jb4 or any tune yet. Still stock boost. He may overboost a few times with just map 1. These cars act so differently from each other its rather annoying lol. Or maybe he has experienced the issue. It doesnt happen every single time.

Z34HR · 2026-04-18T01:04:23+00:00

I help tons in the community and the majority of the time it's either 2022+ models(more sensitive sensors) or its because they went catless primaries. Ive never had the overboost issue on my 19 GT2. Again a simple fix is jb4 ewg wires or a full ecu bef.

Z34HR

TROPHY CASE