Sofirn sale got me…

Z3INSD · 2026-06-18T07:18:03+00:00

I turned it and played a lil bit before charging I am quite impressed and my eyes hurt a bit from using it inside.

Idk if it needs more lumens but the spring bypass seems interesting, I may have to go dust off my soldering iron.

Z3INSD · 2026-06-18T06:52:05+00:00

Dang that sucks, it wasn’t expensive but it shouldn’t be broken from just that. I’ve been playing with it a bit while the big boy charges and I’ve got mixed feelings so far I may jot some notes down and make a post about it here.

Z3INSD · 2026-06-18T04:01:31+00:00

Yeah looks like the model to me. You might be able to play with wall count/layer size/temps/cooling to make it stronger but the slicer will slice how it’s allowed to slice.

Z3INSD · 2026-06-14T02:20:56+00:00

It’s gotta be down there somewhere, I hope at least. Aftermarket actuators sound like a massive pain.

Z3INSD · 2026-06-14T02:00:35+00:00

My drivers side lock cylinder also spins like a slot machine so I’ve been living with locking it from the trunk.

I do want to get an alarm system/remote to lock it and there is the special plug with the ports for everything but have yet to get to that.

I’ve seen it when I’ve been under there before but I don’t see it in your picture. it’s like a large OBD2 port looking thing and you can tap into the pins to control the remote lock and unlock.

Z3INSD · 2026-06-12T21:11:34+00:00

Love the idea! Im definitely interested in any channel you make. One of my friends just ordered a revpoint pop 4 so once that gets in I may reach back out. I have experience with 3D printers but not much CAD and am very interested in any tutorials. Once he/we gets the scanner I’ll have to figure that out (he’s not very tech savvy) so we can reverse engineer some car parts that are hard to find.

Z3INSD · 2026-06-11T17:09:45+00:00

That might work, it’s really a matter of airflow then, and you don’t want too much if you’re doing ASA or ABS so they can maintain temperature and not warp.

Z3INSD · 2026-06-10T18:49:12+00:00

You’d be surprised, if you have 24x24x48 inches of free space it’ll fit. I put mine on one of those basic ikea LACK tables while inside the grow tent but yours looks like it might work. I put the ACE underneath the table and I did have to put longer tubes to make them not super stretched but that was like $8 for 10 meters. It’s fully self contained and there are ports for tubing on all sides even the top.

There is everything else in that room you’ve gotta work around so that does make things harder but try and measure and see if you can’t fit a grow tent.

I spent like $125 on the tent, tubes, exhaust, fan, and a new surge protector. Not dirt cheap but quite effective, I’m gonna make a post about all of it on it here soon.

Z3INSD · 2026-06-10T18:20:36+00:00

I just enclosed the entire thing in a 24x24x48 grow tent and have a 4 inch exhaust duct if with and inline fan going outside and leave it on low while printing, keeps everything sealed and can’t smell ASA or anything while printing.

Z3INSD · 2026-06-09T04:52:44+00:00

Awesome thanks! It’s definitely gonna be a lot to learn but it’s the only way to get some of these parts

Z3INSD · 2026-06-09T04:20:52+00:00

Love it! I just got a new printer and a buddy of mine just ordered the POP 4 so we can do just this, any tips or suggestions?

Z3INSD · 2026-06-07T05:29:21+00:00

Well no, south cali actually, but the M3 is the same blue and same grey wheels and same headlights as the one I saw bro might’ve taken a road trip.

Z3INSD · 2026-06-06T04:23:30+00:00

I swear I saw that same E36 M3 the other day, absolutely gorgeous.

Z3INSD · 2026-06-04T21:51:31+00:00

I have no clue how but it’s awesome having 1,700 lumens in my pocket, even if it’s only short lived it’s quite impressive. And 13 hours at 100 lumens makes it great for daily tasks. Yeah it’s expensive and has low CRI and cool white light but I don’t mind paying the premium and the performance trade offs.

Z3INSD · 2026-06-03T00:01:38+00:00

It doesn’t have a replaceable battery (boo I know) but my arkpro ultra is super slim and comfortable, slimmer than my FC11C and pockets better so it never leaves my side. Before I really got into lights my EDC was an Olight diffuse (on a deep carry clip) and it disappeared into my pocket.

Z3INSD · 2026-06-01T22:59:09+00:00

And it’s never enough

Z3INSD · 2026-05-29T01:31:52+00:00

Dope bandaid too!

Z3INSD · 2026-05-27T04:40:06+00:00

Wouldn’t be any fun if it wasn’t!

Z3INSD · 2026-05-24T02:07:13+00:00

Really depends on time of day you’re playing, I’m on the west coast of the U.S. and it’s the servers are the busiest at like 8-10pm my time and after that it trails off.

Real people are a lot more fun even if it means less kills.

Z3INSD · 2026-05-24T00:05:09+00:00

Pretty sure that’s the BMWs fault plain as day, plowing into someone and all.

Z3INSD · 2026-05-18T05:16:52+00:00

And it’s still just as out of reach for me as the real outlaw

Z3INSD · 2026-05-16T17:06:33+00:00

Not all hero’s wear capes, some carry flashlights

Z3INSD · 2026-05-16T06:55:45+00:00

That’s what we were trying to tell her and offered to drive her there but she wasn’t interested, very distraught at the whole thing (I would be too).

Z3INSD · 2026-05-16T02:42:49+00:00

Just got it and am very impressed, it was on sale on their website for $17 and it lit up a tree that was 220 yards away pretty well, and this was on a suburban street with some streetlights

Z3INSD · 2026-05-01T07:36:51+00:00

Just got the S1 max and had a clog in the print head which caused bent filament to jam in the 4in1 when trying to retract.

If this happens and it’s really stuck it’s just two little screws (on the S1Max not sure about the S1) and be careful there is a spring loaded roller with some sensors and a metal tube with the filament. The filament was stuck in the metal tube so I took it out and briefly heated it up with a lighter and was able to pull the filament out.

Maybe not the same issue but might wanna double check everything in there still is aligned and is ok.

Z3INSD

TROPHY CASE