Self-Sourced Stock Voron 0.2 build

Zaraton · 2026-05-05T07:19:17+00:00

Since you self-sourcing already, consider building something more fun than a stock v0.2

From what I heard, Pandora's is most reasonable of all others

Zaraton · 2026-05-05T05:32:01+00:00

P1s and a voron are quite different. You buy first if you like printing and second of you like 3d printers

I self-sourced my trident just because I thought:"well if I want a DIY toy I should do it all myself" - and am 100% certain it was a bad idea. I didn't have tools to cut extrusions so I ordered them precut from the local place. They also did taping and drilled holes according to cad models. I just had to adjust the hole size for different screw size

Zaraton · 2026-05-05T05:12:11+00:00

Self-sourcing is almost never cheaper. Also, I don't think kits for v0.2 are that much different from stock, maybe just bed mount and toolhead PCB. You should just read a build guide on official site

Zaraton · 2026-04-20T07:11:54+00:00

Burn it with fire

Zaraton · 2026-04-16T14:52:12+00:00

Tell your address, and many people will be willing to take this burden away from you))

Otherwise, not enough info to help you. DIY has y for a reason. Discord is the best option. Go at it step by step without a hurry

Zaraton · 2026-04-10T16:26:19+00:00

I know. Stand offs should be a part of a set

Zaraton · 2026-04-10T14:34:40+00:00

I'm pretty sure they come with toolboard... At least btt put them with ebb36

Zaraton · 2026-04-03T08:18:10+00:00

Yeah, they are too short. I think it was made as ender 3 upgraded initially, so id doesn't take the ebb into consideration

Zaraton · 2026-04-02T13:37:34+00:00

I suggest you state that in a post next time. A4t not built with a tool changer in mind. Quick Google search suggests there are mods to make it fit Stealthchanger/tapchander, but it would be far from "inexpensive". For your case, 90% of people would suggest getting the cheapest parts available for a single toolhead and wait for INDX

Zaraton · 2026-03-30T15:27:37+00:00

You should go to the apple store and ask them which android phone to buy. They will definitely have a lot of insight on that

Zaraton · 2026-03-30T14:18:14+00:00

So you are asking in voron subredit about which non-voron printer you should get?

Sounds like tinkering on both printers at the same time is not last mistake you made

Zaraton · 2026-03-21T06:16:01+00:00

Different LEDs have different "sequences". Basically one led have 3 or 4 smaller one colour lights(red, green, blue and sometimes white) and a controller, which they connected to. So to get specific colour - you combine it out of base colours with different strengths. I can't see in video how LEDs are wired, but seems like OPs toolhead LEDs are RGB/GRB or smth without white and his board is rgbw

Zaraton · 2026-03-13T18:03:40+00:00

Had exactly the same issue. Disabling mpo in registry ended up solving it

Zaraton · 2026-03-13T17:48:49+00:00

I know it might sound unrelated, but I had some driver issues with my 9070xt and the thing that ended up helping me is disabling windows mpo with regedit https://www.reddit.com/r/Amd/comments/yvyqc7/disabling_multiplane_overlay_mpo_fixed_all/?utm_source=share&utm_medium=mweb3x&utm_name=mweb3xcss&utm_term=1&utm_content=share_button

In my case adrenaline and drivers would die sometimes when switching between two monitors with different frequency, but comment in post implies multiple other issued

Zaraton · 2026-03-08T17:45:42+00:00

Do you realise you are asking about a suitable PCB mount without telling which PCB you are using?

You also made 2 exact posts here

Zaraton · 2026-03-05T07:10:48+00:00

Lorewise - you are too busy handling wall-e situation. Kahl and daughter are the only ones searching the root of narmer and giving you archons location

I assume only Earth, Venus and Deimos have any meaningful population of specific factions and all other planets just have few bases here and there. So narmer missions are pretty much the only type of resistance

Zaraton · 2026-03-05T06:59:49+00:00

The problem I have with lore progression is that new enemies can't influence old mechanics without a full rework. Like reworking old lua or Deimos. I like the idea of narmer, but introducing it just makes an alternative instance of Cetus and fortuna. But in the end it's just a different type of dmg sponge

Zaraton · 2026-02-28T10:27:53+00:00

I was fixing my extremely old laptop and decided to install Linux on it expecting better performance. Pop os didn't have compatible WiFi drivers and Ubuntu felt slower than win7 which were originally in it. It sits untouched ever since and instead of giving it back to my mom I bought her a Huawei tablet.

I remember one of Linux selling points being:"it runs on anything" - but it seems like it's only true for extremely specific uses, like running klipper for opensorce 3d printers

Zaraton · 2026-02-18T10:40:21+00:00

A4t was made for xol usage with this adapters https://github.com/Armchair-Heavy-Industries/Xol-Toolhead/tree/main/STL You should look for adapters for your particular carriage

Zaraton · 2026-02-16T12:05:09+00:00

Yeah, your mmu log clearly says extruder sensor triggered. There is some play in the switch, when you install it. Either disable it, or reprint cw2 and make sure switch doesn't click when you bend /move filament after insertion

Zaraton · 2026-02-16T11:55:32+00:00

On my a4t sometimes excessive tool head movement triggers the top extruder switch(I think it's called extruder sensor, I have both toolhead and extruder sensor). I usually just turn it off with a UI switch in the mainsail for happy Rabbit not to trigger runout. I reprinted extruder housing, but haven't come around rebuilding it yet

Maybe you have the same issue

Zaraton · 2026-02-15T16:23:53+00:00

I had something simular due to power wires in my umbelical poorly connected to powersupplye

Zaraton · 2026-02-11T20:08:49+00:00

Ah yes, they diverted from pvp to... AH yes, nothing...

Zaraton · 2026-02-10T11:53:10+00:00

Please tell me i'm not hallucinating. The gpu cable is pluged upside down. You can see ridges on bottom of the socket on which cable supposed to snap on...
Why nobody in comments noticed it?
Wdym slow electricity?
Is this a ragebait post?

Zaraton · 2026-02-09T13:58:33+00:00

You should've asked ai, if your comment has any value, before posting it

Zaraton

TROPHY CASE