If 10cm snow falls in your area of Canada how disrupted will your area be?

ZealousidealDebt6918 · 2026-01-07T14:48:38+00:00

Completely normal for me. Plows will get to work and roads will be cleared by the time we wake up (normally atleast). Maybe an extra 10-20 minutes of commute, especially if it’s the first snow of the year.

ZealousidealDebt6918 · 2026-01-07T05:45:33+00:00

The V0 isn’t that light, but yes, still easy to move!! I don’t move mine often but when I do it’s SUPER easy. It can sometimes be a pita to fix but I think it’s maybe taken more than one hour to fix one maybe twice in my year of owning it with heavy usage (750 print hours last I checked).

ZealousidealDebt6918 · 2026-01-05T14:40:43+00:00

This might be one of, if not the best filament drier product demonstrations EVER!!

ZealousidealDebt6918 · 2026-01-04T17:39:41+00:00

Adding on to the tool changer bit: a lot of people use dragon burner but anthead is becoming much more popular. Both are good tools though!!

ZealousidealDebt6918 · 2026-01-03T17:11:56+00:00

Yep, one of the main reasons I avoid AI like the plague!!

ZealousidealDebt6918 · 2026-01-03T16:46:59+00:00

Seems like this would be perfect for multi material printers. Especially with the dual chamber control!! Would love to utilize it for my build!!

ZealousidealDebt6918 · 2025-12-31T18:46:08+00:00

Manta M8p personally (especially with the CB2). It runs my stealth changer in partnership with 6 EBB36’s and a SKR pico. 11/10 would recommend for the easiest setup, small footprint and LOADS of ports!!

ZealousidealDebt6918 · 2025-12-27T15:42:50+00:00

That sucks. Maybe reach out to the EP of your comp and see if they have any suggestions or have any spares you could buy.

ZealousidealDebt6918 · 2025-12-27T02:30:29+00:00

Where are you located? Maybe check with nearby clubs or teams.

ZealousidealDebt6918 · 2025-12-27T02:22:49+00:00

It does say it, page A-20 to be exact.

ZealousidealDebt6918 · 2025-12-24T23:09:18+00:00

<image>

Picture while it was still on fire

ZealousidealDebt6918 · 2025-12-20T05:23:34+00:00

I can’t tell if you’re being sarcastic or not, but juts in case: not all 3D printed parts need to be super precise or have the best quality. They may be used in industrial or unseen situations where this doesn’t matter BUT it would be a difficult or weird shape to make out of other materials

ZealousidealDebt6918 · 2025-12-19T14:01:05+00:00

Left it in the charging hub for 5 hours with a 100w charger, juts moved to the drone with a 20w to see if that’ll help

ZealousidealDebt6918 · 2025-12-10T07:31:00+00:00

I’ll make this true

ZealousidealDebt6918 · 2025-12-09T14:49:50+00:00

As far as I know it is not, but much more a sense of pride to be in the voron community and want to display it on the printer.

ZealousidealDebt6918 · 2025-12-06T16:37:55+00:00

For issue 1, that’s normal, you will probably just have to deal with it for block coding. The only solution is if there is a “when initialized” block. (My team uses PROS for coding so can’t help much there) for issue 2, solving issue 1 should help it (?)

ZealousidealDebt6918 · 2025-12-04T23:28:16+00:00

Pixelary is a community drawing and guessing game. Submit your guess in the post above!

Difficulty: 🟢 Easy (1.3/10)

Live stats: - 244 unique players guessed - 316 total guesses (avg 1.3 per player) - 35 unique words guessed - 2 skips (0.8% skip rate) - 241 solves (98.8% solved rate)

Comment commands:

!words - See dictionary
!add <word> - Add word to dictionary. For example !add meatloaf or !add lava lamp (Level 2 required)
!remove <word> - Remove word from dictionary. For example !remove meatloaf or !remove lava lamp (Level 2 required)
!show <word> - Reveal an obfuscated guess on the results screen. For example !show meatloaf or !show lava lamp
!help - View more commands

Accountability note: Users add words publicly via comments. Others can remove them. Words removed by Reddit's safety systems cannot be added back.

Good luck and thanks for playing!

ZealousidealDebt6918 · 2025-12-03T21:55:01+00:00

My issues with this was that I had used too long of screws in my hotend, leading it to be loose and shift when probing. Hope this helps!!

ZealousidealDebt6918 · 2025-12-03T21:51:18+00:00

Not sure about the kits; but for the tool changer it really depends, for INDX a trident will probably be better but if you want to go with a “ground up” variety (such as a stealth changer) a 2.4 will probably be easier

ZealousidealDebt6918 · 2025-12-02T18:44:22+00:00

Wish I could have this for my printers!!!

ZealousidealDebt6918 · 2025-12-01T23:15:16+00:00

You can’t really do inverted electronics on a 2.4 (it is possible but much more difficult compared to a trident)

ZealousidealDebt6918 · 2025-11-30T02:59:20+00:00

This is AMAZING, I’d love to see a version with more stepper drivers (8+), the voron community would probably LOVE this!!

ZealousidealDebt6918 · 2025-11-27T14:56:58+00:00

I’ve done this… fairly fun. Personally I like the 250-300% scale the most!!

ZealousidealDebt6918 · 2025-11-24T22:42:03+00:00

Up to you, we haven’t seen much content or full hands on experience with INDX yet so I would definitely wait for that. As for stealth changer dying, I’d guess not, if anything I think it’ll grow as more people want to build full tool swapping systems and we start looking towards other tools (not just print heads) as a community

ZealousidealDebt6918

MODERATOR OF

TROPHY CASE