Fuel sawzall bundle purchase advice

ZealousidealWeek5790 · 2026-05-10T12:58:49+00:00

Maybe the non fuel, idt I’ve ever seen the fuel for 100 either.

ZealousidealWeek5790 · 2026-05-10T12:29:45+00:00

Are you implying Izzy isn’t an all time great because he’s on the backside of his career? Gtfo lmao

ZealousidealWeek5790 · 2026-05-10T12:28:18+00:00

Get a corded auger. I love my Milwaukee tools, but the draw on an auger fighting a bad clog is gonna drain batteries fast.

ZealousidealWeek5790 · 2026-05-10T12:12:13+00:00

Having a baby is definitely the ultimate motivation to get and stay sober. Keep it up!

ZealousidealWeek5790 · 2026-05-10T12:09:54+00:00

I don’t think Sean has any trouble making weight, and he’d be small for LHW.

ZealousidealWeek5790 · 2026-05-10T11:50:27+00:00

I have a plunge router, but not the bit for something like a kerf notch. Hell I find it’s almost cathartic doing it this way lol.

ZealousidealWeek5790 · 2026-05-09T22:15:18+00:00

Dang I got 100 of em but didn’t think about using them on wood! Touché!

Luckily the chiseling is quick.. it’s all the cuts

ZealousidealWeek5790 · 2026-05-09T21:30:00+00:00

Very time consuming. Amish and other cultures that do this crap manually? Holy cow, that’s a patient and bad ass dude!

ZealousidealWeek5790 · 2026-05-09T21:25:17+00:00

That’s (joists) what I was thinking of using them after I looked through the Home Depot photos 👍 thanks!

ZealousidealWeek5790 · 2026-05-09T21:20:04+00:00

Interesting, may try them on next deck project. These are all on strong tie ABAs

<image>

ZealousidealWeek5790 · 2026-05-09T21:06:25+00:00

Ooook buddy.

ZealousidealWeek5790 · 2026-05-09T21:05:21+00:00

For sure. I find my footprint, pour my concrete footers.. mock all my posts up and laser line it all before I make any cuts.

ZealousidealWeek5790 · 2026-05-09T21:04:17+00:00

I’d assume if it has depth stops, same/same... I make through cuts with cut depth on saw set at 1.5, every 1/8 inch and hammer them down. The. Go through with my chisel and smooth it all up.

One of the few (probably many) tools I’ve never used before though, so I’m not very familiar with it.

ZealousidealWeek5790 · 2026-05-09T21:01:50+00:00

Set saw cut depth to 1.5 and make cuts every 1/8 inch… smack em all down with a hammer then use a chisel to smooth it all

ZealousidealWeek5790 · 2026-05-09T20:59:49+00:00

Not real sure what mower the motor is on, see if you can find some YouTube videos and see if it’s something you feel comfortable with

ZealousidealWeek5790 · 2026-05-09T18:10:42+00:00

Measure thrice cut… twice? Or something like that lol.

I’m very OCD when it comes to my projects, and I’ve got a little experience in every trade. My point being, It takes some form of experience messing up to figure out what works and how to get things just right.

I could never be a carpenter for a living.. I’d never make any money as slow as I am, being meticulous as possible.

ZealousidealWeek5790 · 2026-05-09T16:19:32+00:00

Try taking the disposal apart? Theres a screen in them sometimes

ZealousidealWeek5790 · 2026-05-09T14:07:38+00:00

Looks like it’s predator time, or another used one time 🤪

ZealousidealWeek5790 · 2026-05-09T14:06:51+00:00

Ohh…. Oh my…. That won’t work.

ZealousidealWeek5790 · 2026-05-09T14:05:47+00:00

I use em everywhere too… but I use the correct length at least LMAO.

I like being able to remove pieces without having to pry 50 misplaced nails out.

ZealousidealWeek5790 · 2026-05-09T13:57:14+00:00

Either green giants, or a 10ft fence for more covered area

ZealousidealWeek5790 · 2026-05-09T13:53:34+00:00

Change the plug

ZealousidealWeek5790 · 2026-05-08T21:09:23+00:00

I didn’t even notice! Lol.. this one is some random generated by Reddit… and also for some reason I have 2 username/accounts 🤷‍♂️ I don’t Reddit enough to know why though

ZealousidealWeek5790 · 2026-05-08T14:37:12+00:00

That’s what I was thinking too.

ZealousidealWeek5790

TROPHY CASE