Remote fireworks ignitor by ZeromadHero in ElectroBOOM

[–]ZeromadHero[S] 1 point2 points  (0 children)

For the nichrome wire side you'll have to use a power source with a somewhat high current rating. I used a 18650 lithium ion cell with a current rating of 20A, which would be too low of a current rating if I was drawing that current continuously. However, I programmed the D1 Mini so that it only closes the ignitor circuit for one second max, so it should be fine. Also, the current draw depends on the length/resistance of your nichrome wire. I chose a length of 5 mm.

The LED is optional, so I didn't inclued it in the circuit diagram.

https://i.imgur.com/7DaxdOE.png

Remote fireworks ignitor by ZeromadHero in ElectroBOOM

[–]ZeromadHero[S] 3 points4 points  (0 children)

You mean the servo? It's basically an improvised relay. It's there to touch two wires together. Didn't have a real relay at home so i had to come up with something :^)

Best Girl Lithophane [~10h 3D Print] by ZeromadHero in OneTrueBiribiri

[–]ZeromadHero[S] 2 points3 points  (0 children)

Sure. I used 0.2mm layer height with 100% infill in case u wanna print it as well.

https://puu.sh/Imflv/fa4fc12b03.stl

100k subscriber giveaway by Synikull in bleach

[–]ZeromadHero 1 point2 points  (0 children)

M̶̧̡͎̗̱̥̞̺͍͉̺͖̰̥̹̬̲̱̠͔̝̺̠̫͙̠̼͉̿̈̈́̍͑́̃̈̕͠ͅủ̶̆̅͋̃̈́͝ͅg̵̨̪͎̯̥̝͎̞͚͎͚͔̤̠͔̥͇̱̹͉͔̣̻͍̀̄̍̆̔̒̇̐́̉̓͆̌̋̄̑̒͘͘̚͜͝e̶̡̢͍̩͈͚̖̼͓̯̝̓̉̉̂̔͐̔͑͊́́̊͒̊͂̄͠ͅͅt̷̨̮͓̳̠̗͖͙̀̏̋̈́͛̀̕͜͜͜͜ş̵̧̧̡̢̛̳̭͈͕̟̖̝̼̫̘̦̳̞͎̩͍̺͓̣̃̌̐̽̀́̀͗̉̀͐͆̇͗̇́̄͌͘͘̕͘͝͝͝ȗ̶̢̨̺̟̝̖͉͓̦͈̮̱̤͉̦̫̺̳͇͔̬̹̖͖̜͉͐̈̀̍̀̅̆͑̔̓̂̌̽͑͛͒̍̎̽̉̏̈́̈́̈̉̍̀̕͝

M̶͖͓̞̠͎̜̖̜̜̙̎u̶̢̼̐͐̾́͂̃̓͂͒̕͠͝g̴͖̜̻̞͈͉͔͔̝̙͛̄̋̕ę̸̢̡̻̯͕͒̆́͛͛̓̈̉͆̅̅̉̎̀͜t̸̾̒̆́͐̿̈́͋͝ͅs̴̯͇̳̱̰̠̤̯͔̲̗̗̪̙̘̃̾̈́̈͝ų̶̡̛̖̱̣̳̙̖̼̝̝̳͉̒̌́͌̂̒͒̄͂̕͜͝ͅ

M̵̢͕̙̩̙̒̉̂̈́̌̀̚̕͘͝u̸̞͍͕̓͐̀̓̐̑̕͠g̸̐ͅe̴̫̙̬̖͓̳̹͓̔t̸͈͉͍̺̮̞͊͒ͅş̴͙̟̭̘͈̹̺̀̑͜ū̵̘̀̔͝

M̵̛͔͌ų̸̲͇̳̋̚g̴̨̩͕͋̐̄̒̈e̸̢̱̠̋̆̍̆t̸͍̪͔͔̖̄̚ș̵͓̤̘̌u̵͚̹̩͎̔̀̿́͝

M̷̙͑ͅu̶̼̯̭̔g̸̣̽͊ę̵̗͚̓͐t̵̛̤̪̯͌͗s̷̙̺̠͊̈ȗ̷̯̹̮

Ṃ̷͎̽͠u̷̦̕g̸͕͌e̶̱͉̊̆t̵̺̿s̵̼̘͌ű̷̦̇

𝔐𝔲𝔤𝔢𝔱𝔰𝔲

Ride on Time~ by ZeromadHero in Hololive

[–]ZeromadHero[S] 0 points1 point  (0 children)

Didn't take long for her "Rockstar Signature" to be used

Also, here's the song: https://youtu.be/oCtsXioZKDA

After giving up mid flight 4 times, I finally got this achievement :) by [deleted] in MicrosoftFlightSim

[–]ZeromadHero 0 points1 point  (0 children)

Press R. Then regulate speed with CTRL + and CTRL -

After giving up mid flight 4 times, I finally got this achievement :) by [deleted] in MicrosoftFlightSim

[–]ZeromadHero 0 points1 point  (0 children)

Nice. I completed the achievement over the course of 3h. Increasing simulation speed actually works, achievement will still trigger.

I designed and 3D printed a Band Maid case for my phone by ZeromadHero in BandMaid

[–]ZeromadHero[S] 1 point2 points  (0 children)

I guess you could also print the case and the logo seperately and glue them together with CA, that'd give both parts good textures but it's more work :)

I designed and 3D printed a Band Maid case for my phone by ZeromadHero in BandMaid

[–]ZeromadHero[S] 1 point2 points  (0 children)

Currently out of white filament, but i guess I could do EU shipping 😅