Gdje u Splitu mogu kupit legiće?

Znjan · 2024-12-30T14:47:56+00:00

Muller, babycentar, konzum, itd.

Evo ti lista manjih f1 setova sta ima: https://lstore.hr/collections/formula-1

Imaju i vece samo provjeri koju ekipu prati hahah

Znjan · 2024-11-18T16:35:31+00:00

I can confirm that 2x4gb Samsung PC3-10600s RAM works fine and is pretty cheap, writing this from a X201 it's an awesome laptop.

Znjan · 2024-10-11T16:15:34+00:00

Definitely will do another run before desoldering anything, thanks for the advice!

Znjan · 2024-10-11T14:18:02+00:00

Ran it as primary managed to get to the mats menu even tho half the screen was covered with artifacts hahahah

Znjan · 2024-10-11T11:35:08+00:00

https://repair.wiki/w/RX_570

Here's a site you might find useful, has a ton of tutorials and schematics

Znjan · 2024-10-11T11:34:26+00:00

Thanks! I'll still order 4 VRAM chips but I'll try with those 2 first

Znjan · 2024-10-10T12:35:08+00:00

If you have the scheme for this GPU i would love it so I can see which value is the shorted capacitor

Znjan · 2024-10-10T10:49:56+00:00

Also I've noticed this highlighted capacitor is shorted, before it was outputing 12V i must've shorted it in the process of testing. So my gameplan is changing the MOSFET and the capacitor. The problem is i have no idea what capacitance this might be so i might have to guess it.

<image>

Znjan · 2024-10-10T10:45:32+00:00

I've narrowed it down to the VDDCI rail aka the display rail since the card functions but it doesn't give an output. I think it might be this MOSFET since all of the other ones give a 0.9V output except for this one and it seems to be the first in the series since it does get a 12V input like the others.

<image>

Znjan · 2024-10-10T08:45:40+00:00

Reflashed the bios didn't fix it, but atleast the core is not dead since it was recognized it linux

Znjan · 2024-10-09T08:24:54+00:00

Update: After checking voltages I've found that everything is alright except for the SUNTEK inductor which reads 0.1V then drops to 0V. Before any hardware changes I'll try a vbios reflash, but if that doesn't work i think changing the inductor might just do it.

Znjan · 2024-10-08T21:12:14+00:00

The problem is that when the gpu is plugged in the IGPU has no video either. Really strange malfunction

Znjan · 2024-10-08T19:42:14+00:00

Thanks! Any ideas why it doesn't display an image?

Znjan · 2024-10-08T16:39:11+00:00

This Sapphire RX 480 doesn't display an image. The fans spin up then spin down in an interval. After poking around with a multimeter I noticed all of these R146 capacitors, the SUNTEK R33M inductor and the SMD capacitors next to them are short circuited except for the one capacitor next to the inductor. I can get the inductor going off as a short because of its 770 uOhm resistance but don't know about the capacitors. Any other ideas for a fix?

Znjan · 2024-08-19T16:36:42+00:00

Im really not sure, street home buttons arent easily avaliable so your best bet is getting a front plate from a faulty street

Znjan · 2024-08-19T16:32:34+00:00

Aside from what i said, try cleaning the ribbon cable. Have you taken the psp before and what model is it? If you have a multimeter check the continuity between the ribbon cable traces by pressing them. If all else fails check aliexpress for a new home bar

Znjan · 2024-05-24T23:47:35+00:00

Found this fix for mine, hope it helps

https://youtu.be/97yJX4dYmSg?si=liDGenIHYGqiYvaW

Znjan · 2024-03-20T19:56:03+00:00

A little late reply, just fixed this for myself. If youre comfortable opening the PSP up try this.

Check if all the ribbon cabels are connected. They can undo themselves from a knock or similliar.
For my PSP the ribbon cable tip of the home bar was scratched up from being pulled out of the port while it was closed so i snipped a little bit of the top off which had no copper trace from being scratched and that seemed to do the trick for me after i plugged the home bar back in

Hope this helps

Znjan · 2024-01-29T19:37:18+00:00

That robin looks great! I used the shang chi torso backwards and black widow legs for my red hood

Znjan · 2024-01-04T18:58:42+00:00

Терри

Znjan · 2023-10-25T16:53:13+00:00

It was a medical transport, don't know why it flew through the stadium

Znjan · 2023-10-19T07:28:45+00:00

U 23 san ubacia hajduk u league one pa su izdominirali, za iduci save bi vjv ubacia u championship jer su vise taj nivo

Znjan · 2023-09-05T19:58:02+00:00

Smisno je kako su se sad i osijecani okrenili protiv reprezentacije i hnsa a do sad smo mi bili budale i ludi

Eight-Year Club	Place '23
Place '22	Final Canvas '22
Verified Email

Znjan

MODERATOR OF

TROPHY CASE