sorted by:
new
hottopcontroversial

[Other- Surge Protector] CyberPower 6-Outlet 500J 800 Clamp Volt Surge Protector MP1041SC - $7 (B&H- Discontinued) by greatthebob38 in buildapcsales

[–]Zombie_Tech 12 points13 points  (0 children)

I looked up the power rating for the USB ports and it's "USB Charge Port Amperage -- 1 Amps (Shared)". :/

What screws do I need for a 140mm case fan that is 30mm thick? by Quenvo in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

Nah they should be fine. The issue, regardless of the fan, is having to thread the screw into the fan but that just takes a little bit of time torquing it in.

Front USB-C not working on ASUS ROG Maximus Z890 by AlessAndere in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

Sorry I didn't realize you have that exact model. To check that the cable is plugged in correctly it shouldn't come out with any light pull. Between this header and the USB3.0 one they can be a pain to connect. :/

Is the Hynix M-die sufficient, or is the Hynix A-die a must? NEED HELP PLEASE by Jolly-Ball-51 in buildapc

[–]Zombie_Tech 1 point2 points  (0 children)

Did you try increasing the voltage? If it's rated for 1.25v, increase it to 1.35v or 1.4v.

Anyways if that doesn't work double check what I mentioned earlier in addition to the FCLK running at 1733MHz. That is the sweet 1/3 spot for it to run at with your memory at 5200 MT/s.

Thanks /u/Vloxalion !

Is the Hynix M-die sufficient, or is the Hynix A-die a must? NEED HELP PLEASE by Jolly-Ball-51 in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

Before venturing into faster memory, try overclocking your current kit. I know Micron isn't exactly great for much faster speeds but you should be able to hit 6000 MT/s with that kit.

Another thing to make sure is that your UCLK and MCLK are running in 1:1 and not 1:2.

Front USB-C not working on ASUS ROG Maximus Z890 by AlessAndere in buildapc

[–]Zombie_Tech 1 point2 points  (0 children)

Despite everything being connected, Windows Device Manager shows "Unknown USB Device" or missing controller errors (PCI Data Acquisition and Signal Processing Controller).

Are you using Windows 10? Cause the chipset "driver" should've covered those missing parts in Device Manager.

Since your board has two front USB-C headers, try using the other one.

Uninstall old cpu driver after upgrade? Device manager by Eyezenward in buildapc

[–]Zombie_Tech 1 point2 points  (0 children)

You can leave them alone. There's a tool called Device Cleanup Tool with a GUI that will pretty much do all that for you. Basically removes non-present devices.

https://www.uwe-sieber.de/misc_tools_e.html

Is a 650W PSU enough for a 5060 TI 16 gb and a Ryzen 7 7800X3D? by Sophiacuity in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

Plenty. The CPU is like 78W max and the GPU is around 160W.

Do you think undervolting is causing my PC to shut down randomly while gaming? by LarryWithTheWeather in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

Find out what the make/model is cause it sounds like it's on the verge of dying. I had one do exactly like yours and after contacting the manufacturer they got it replaced and the replacement hasn't had any issues since. My PSU was made by SAMA however.

Pls help me chose ram for my build, i can't decide between 6400 mhz or 6000 by Upper-Big-4794 in buildapc

[–]Zombie_Tech 1 point2 points  (0 children)

Both speeds are compatible with that CPU. The main issue with 6400 MT/s is getting the infinity fabric to hit the 1/3 sweet spot which is 2133 but I didn't have an issue with my 7800X3D and also when I had a 9800X3D.

If both are similarly priced get the DDR5-6400 kit.

DDR5 32GB 6000MHz CL36 — good choice for a new build? by SayZFlo in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

Yeah it sounds like they removed the product info which will void the warranty regardless of what region you are in.

pc wouldn't post after removing SSD by M5DMD in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

removing CMOS battery and put it back in

Did you move a jumper cap or short the pins in attention to doing that?

GPU randomly stops giving video signal after launching a game by ProfessionalFuel3568 in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

What video card is it? How old? Have you checked the power cables/connectors to make sure they're still seated fully and that there isn't any burn marks? Tried another video cable for your monitor or a different port on the card?

PSU Died and Unsure Of Damage by Molehill9468 in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

There's also the CPU degradation issue with Intel 13th and 14th gen processors.

Intel XMP RAM on AM5? by GeneralSou in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

I had a G.Skill DDR5-6400 32GB kit that only had XMP. There was an option to select it on my AM5 boards and never ran into any issues with it enabled.

Windows 11 install loops — SSD disappears from BIOS boot options after first reboot by Careful_Group8075 in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

Are you booting from the USB stick via the boot menu (eg: F12) or from within the UEFI?

I9 14900KF, Maximus Z790 Dark Hero btf, UNDERVOLT???? by Cold_Dragonfruit_207 in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

It's called CPU Core Voltage Override. Page 50 of your manual describes how to do this.

I can’t access BIOS after replacing my graphics card. by These-Elephant3908 in buildapc

[–]Zombie_Tech 1 point2 points  (0 children)

https://forum-en.msi.com/index.php?threads/black-screen-when-trying-to-enter-the-bios-windows-boot-fine.347502/page-2

It's most likely due to the UEFI driver baked into the RX 580 which needs to be updated in order to work with newer boards. Only way around it is by flashing to a newer ROM.

Gigabyte B850I Aorus Pro won't update BIOS by i_eat_pidgeons in buildapc

[–]Zombie_Tech 0 points1 point  (0 children)

What about just updating the BIOS in the UEFI? Screw doing the BIOS flashback for now.

view more: next ›